• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.82.1-82.1
• /
• 2013

SPOES(Self Plasma Optical Emission Spectroscopy)는 반도체 및 LCD 제조 장비의 Foreline에 장착되는 센서로써, Foreline에 흐르는 Gas를 이온화시켜 이때 발생되는 빛을 분광시켜 공정의 상태 및 장비의 상태등을 종합적으로 점검할 수 있는 센서입니다. SPOES의 최대 장점은 공정 장비에 영향을 주기 않으면서 공정을 진단할 수 있고, 장비의 메인챔버에서 플라즈마 방전이 발생하지 않는 RPS (Remote Plasma System)등에 적용이 가능하며, 설치 및 분해이동과 운용이 용이한 장점이 있습니다. 하지만, SPOES는 오염성 가스 및 물질에 의한 오염에 취약한 단점이 있습니다. 예컨대, 플라즈마 방전에 의한 부산물들이 SPOES의 내부에 있는 윈도우의 렌즈에 부착되어 감도를 저하시켜, SEOES의 수명을 단축시킵니다. 또한 오염 물질이 SPOES 내부의 방전 CHAMBER에 증착되어 플라즈마 방전 효울을 저하시켜 센서의 효율을 저하시킵니다. 예를들면, 장비의 공정 챔버에서 배출되는 탄소와 같은 비금속성 오염물질과 텅스텐과 같은 금속성 오염물질이 SPOES의 방전 CHAMBER 내벽과 윈도우에 증착되어 오염을 유발합니다. 오염이 진행된 SPOES는 방전 CHAMBER의 오염으로 CHAMBER의 유전율을 변화시켜, 플라즈마 방전 효율의 저하를 가져오고, 윈도우의 오염은 빛의 투과율을 저하시켜, OES 신호의 감도를 저하시켜, SPOES 감도를 저하시키는 요인으로 작용합니다. 이러한 문제를 해결하기위한 방법으로 능동형 오염 방지 기술을 채용 하였습니다. 능동형 오염 방지 기법은 SPEOS의 방전 챔버에서 플라즈마 방전시 발생하는 진공의 밀도차를 이용하는 기술과 방전 챔버와 연결된 BYPASS LINE에 의해 발생되는 오염물질 자체 배기 시스템, 그리고 고밀도 플라즈마 방전을 일으키는 멀티 RF 기술 및 고밀도 방전을 일으키는 챔버 구조로 구성 되어 있습니다. 능동형 오염 방지 기법으로 반도체 공정에서 6개월 이상의 LIFETIME을 확보 할 수 있고, 고밀도 플라즈마로 인한 UV~NIR 영역의 감도 향상등을 확보 할 수 있습니다.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1071-1077
• /
• 2015

In this paper, we adopt PCM (phase-change memory) as a virtual memory swap device and present a new page replacement policy that considers the characteristics of PCM. Specifically, we aim to reduce the write traffic to PCM by considering the dirtiness of pages when making a replacement decision. The proposed policy tracks the dirtiness of a page at the granularity of a sub-page and replaces the least dirty page among the pages not recently used. Experimental results show that the proposed policy reduces the amount of data written to PCM by 22.9% on average and up to 73.7% compared to CLOCK. It also extends the lifespan of PCM by 49.0% and reduces the energy consumption of PCM by 3.0% on average.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.50-54
• /
• 2010

A Container Security Device (CSD) which is different existing RFID Tag strengthens the physical security as mounted inside the container and the information security as encrypts doubly a data. CSD must use the resources efficiently in order to operate with the battery. Therefore, it needs low-power mechanism which repeats the sleep period and channel scan period. However, by adjusting these periods, the trade-off occurs between energy efficiency and network connectivity. In this paper, we implement low-power CSD and resolve this problem by adjusting beacon period and channel scan time. As a result, We guarantee the network connectivity 95% or more and maximum life up to 16 days using common AA batteries.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.690-694
• /
• 2009

In this paper, we propose a hybrid MAC architecture for reducing energy consumption and maximizing network lifetime in wireless sensor networks. For this purpose, the hybrid MAC architecture is proposed for energy efficient by combining inter-cell TDMA and intra-cell CSMA scheme. Based on the ns-2 simulation result, we prove that the proposed architecture improves energy efficiency as compared with CSMA and TDMA.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.826-831
• /
• 2019

The stand-alone photovoltaic power systems are widely used for lighting equipment and CCTV. In order for these devices to be competitive, the life of power storage devices such as batteries is very important. The characteristic Hybrid supercapacitor is the high power density and long life. We have proposed a stand-alone photovoltaic power system that uses hybrid supercapacitor. The charge and discharge characteristics and the internal resistance of the hybrid capacitor were measured to configure the power converter. A stable maximum output point tracking control algorithm is proposed even with the change in solar radiation. In order to verify the validity of the proposed system, a prototype was fabricated and tested using a 18W hybrid capacitor and a 10W solar cell.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.37-41
• /
• 2019

Dental implants are an effective and predictable treatment for restoration of missing teeth. However, as the use of implants increases, complications are also increasing. The mechanical complications are not only highly frequent, but also increasing as life span of an implant increases, thus, solutions should be prepared. In this report, we will present a case dealing with abutment fracture and abutment screw fracture which are the most common mechanical complication of the implant, focusing on preserving and reusing existing components by reconstructing only the damaged parts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1986

Welded connectors of the cover plates, the transverse stiffeners of the plate girders, and the gusset plates of the plates girders or box girders, were selected as studying objects. A simplified method of drawing the S-N curves in these welded joints by a computer program without the direct fatigue tests was established. The plots on the S-N curve using the values from the practical fatigue tests were compared with the results from the method of the computer programming. The results of these studies are as follows. It appeared that the fatigue life by calculation method was a little less than the practical fatigue life from the actual tests. The latter values included both life $N_c$ of occurrence of initial crack $a_i$ and the life $N_p$ of propagation of critical crack. On the other hand, the former values included only the life $N_p$. Therefore, these results should be considered as justifiable ones. Since the difference between the two results was not significant, the results by calculation method should be in the conservation side when the safety of the structures was considered. Consequently, the results by calculation method should be applicable to the fracture fatigue design of structure. For reference, the same fatigue tests were performed with the specimens of 3 pieces in each case made of the low-strength steel, SS 41. The results went unexpected showing that the fatigue strength was lower in the case of low-strength steel. That is, in the case of the cover plate, the fatigue strength became slowly higher than the case of high-strength steel, SWS 50. That was observed when the maximum testing stress was higher than $14kg/mm^2$. In addition, in the case of the transverse stiffener, the fatique strength became rapidly higher than the case of SWS 50. That was observed when the maximum testing stress was lower than $31kg/mm^2$. It was thought that more such fatigue tests should be performed for more reliable results.

• Tunnel and Underground Space
• /
• v.13 no.5
• /
• pp.362-372
• /
• 2003

Since the occurrence of Portland cement, a great number of concrete structures were constructed. But the concrete structures have their own life times, which inevitably demand repairing treatments, especially on their surface parts. Currently many various methods have been developed and are being applied fer this purpose. In this study, a newly developed method using pneumatic chipping machine and anchor pin was adopted far repair of old concrete structure and the mechanical characteristics of cementing plane between existing and new concrete were tested. Comparing the removal methods for the decrepit part of existing concrete using pneumatic chipping machine and hydraulic breaker, the peak cohesion was higher when using chipping machine at the cementing plane. On the other hand, the residual cohesion was higher for the case of breaker. Step shaped chipping on the cementing plane was effective in increasing peak cohesion, which results 14% increase in the case of 30 mm step height and 22% in 50 mm height when compared with planar chipping plane. The use of anchor pin increased the residual cohesion, which restricted shear slip on the cementing plane after peak shear stress and the tensile strength of 32% compared with that of non-anchored case. According to the combined effect of step shaped chipping of 30 mm and anchor pin with an interval of 15 cm, the peak cohesion reached up to 77% and the residual cohesion showed 180% of the ones of the fresh concrete, respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.99-100
• /
• 2004

AMBIDEXTER-NEC의 천이노심은 $^{Nat}Th$과 $^{Nat}U$의 주입만으로 전 출력의 Break-even 노심에 도달하기위한 중간 단계이다. 선행연구에서 수행한 전 출력노심인 평형노심의 핵종수밀도에 도달하기 위해서 평형노심에서의 기저물질, 잠재핵분열성물질, 핵분열물질의 수밀도를 각 SEU-기반, Pu-기반, ADS-기반에서 그대로 유지하여 초기노심을 구성하였다. 또 각 시나리오에 대해 최대첨두출력과 원자로의 안전성을 고려해 Excess Reactivity를 5mk 내에서 초기노심을 결정하였다. 각 노심은 주 핵분열성물질 $^{235}U$, $^{239}Pu$ 및 $^{233}U$의 핵반응단면적 특성에 따라 평균 전환율이 각각 0.95, 0.83 및 1 .21 로서 핵연료물질의 적절한 선택만으로도 전환로, 연소로 및 증식로로 설계할 수 있음을 보여준다. 이러한 $Th/^{233}U$, U/Pu 핵연료주기를 사용하는 AMBIDEXTER-NEC 용융염핵연료 원자로의 초기노심에서 시작한 천이노심은 평형노심에장전할 충분한 $^{233}U$ 양을 확보해야 하므로 천이노심의 목표는 평형노심 $^{233}U$의 요구량에 최소한의 기간에 가장 적은 외부주입을 통해 도달하는 것이다. 천이노심에서 임계가 유지되는 AMBIDEXTER-NEC 원자로시스템의 3군 핵종변환 코드인 HELIOS-SQUID-AMBIBURN 체제를 개발하였고 그림 1.에 나타내었다. 이 알고리즘은 각 초기노심 중원소의 미시단면적, 중원소를 제외한 원소들의 거시단면적, 임계도를 만족하는 중성자속 및 외부주입율을 계산하여 SQUID 및 AMBIBURN 입력자료를 제공한다. 또한 일정시간 중원소의 핵종농도, 외부주입율과 중성자속이 일정하다는 가정 하 에 반복수행 하고 SEU-기반과 Pu-기반의 경우에는 각각 핵변환을 거쳐 재순환되는 $^{233}U$ 및 $^{239}Pu$의 양을 바로 주입하는 최대재순환 경우와 평형노심 요구 장전량에 이를 때까지 시설 내 저장하는 최소재순환 경우로 상황을 모사하였다. 그림 2 는 각 시나리오별 초기노심에서부터 200FPD까지 단위 용융염 체적당 $^{233}U$의 수밀도 시간변화를 나타낸 것이다. 그림을 보면 50일 이후부터는 수밀도의 변화가 일정한 기울기를 보이고 있고 재처리공정에서 $^{233}Pa$를 분리하는 최소재순환의 경우에는 최대재순환보다 2-3%정도에 지나지않아 그림에서 나타내지않았다. SEU-기반 및 Pu-기반에서 $^{233}U$의 증가율이 각각 2.54E+13, 2.81E+13 #/cc/d 로 Pu 기반이 조금 더 큰 증가율을 나타내고 있지만 평형노심 농도 1.04E+20 #/cc/d 에 도달하기 위해서는 두 경우 모두 매우 긴 시간이 걸릴 것을 예상할 수 있다. 요컨대 250MWth AMBIDEXTER-NEC가 평형노심을 이루기 위해 필요로 하는 $^{233}U$을 생산하는데 제안한 SEU-기반, Pu-기반 시나리오는 천이노심주기기간이 전형적인 원자로 수명 3-40년 보다 매우 큰 것으로 나타났다. 따라서 장전될 $^{233}U$의 확보를 위한 최적옵션은 초기노심부터 ADS와 같은 외부생산시설로부터 전량을 공급 받아 운전하는 것이라 판단된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1991

Population dynamics of Matted sole Limanda yokohamae($G{\"{U}}NTHER$) in Tokyo bay, Japan has been studied by virtual population analysis (VPA) for multi cohort and experimental fishing. Based on the biological data, the present parameters of the Limanda yekohamae stock at the Tokyo bay, Japan were estimated as follows: natural mortality coefficient(M) were 0.313 for male and 0.250 for female, terminal fishing mortality coefficient(F) were 2.190 for male, and 0.798 for female, rate of exploitation(E) was $30\%\;to\;50\%$. From the result of virtual population analysis for multi cohort, the population size were estimated from 3,5000,000 to 9,200,000 fishes, according to the result of experimental fishing, estimated stock size were 2,400,000 to 8,700,000 fishes. Stock size difference of the two methods were about two times in 1987, however, other years has been showed from 0.8 to 1.5 times. Both method has been showed same increase and decrease tendency of the c. p. u. e. and catches. From the isopleth diagram plot by Beverton and Holt's yield per recruit, the catches could be increase two times for female, 1.3 times for male than present aspects by the fishing management. And further, as reducing fishing effort, extension of mesh size and rising the length at first caputre, are reasonable in order to manage the stock at the optimum level.