• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.94-95
• /
• 2016

스테레오 정합은 서로 다른 두 시점을 갖는 스테레오 영상으로부터 객체의 깊이값을 예측한다. 이 방법은 객체가 카메라로 부터 멀리 떨어질수록 두 시점 사이에 큰 변위차를 갖는 양안시차 특성을 이용해 깊이값을 구한다. 일반적으로 스테레오 정합은 촬영한 두 영상의 조명 변화 및 노출 정도가 같다는 조건으로 수행된다. 하지만 실내 또는 실외에서 실제로 영상을 촬영하면 조명 및 햇빛의 위치 그리고 카메라의 특성에 따라 촬영된 스테레오 영상의 밝기가 서로 달라지는 경우가 발생하게 된다. 이처럼 두 영상의 밝기차를 고려하지 않고 스테레오 정합을 하게 되면 정확한 깊이값을 예측하기 어렵다. 이러한 문제를 개선하기 위해 조명 변화에 강인한 ANCC (Adaptive Normalized Cross Correlation)가 제안되었다. 이 방법은 영상 속 화소들의 색상 모델을 이용해 조명변화의 영향을 받는 요소들을 제거함으로써 다양한 밝기변화 속에서도 안정적으로 스테레오 정합을 수행할 수 있도록 한다. 하지만 ANCC는 수행과정에서 각 화소마다 양방향 필터 (Bilateral Filter)가 적용되는 등 높은 복잡도를 갖는다는 단점이 있다. 본 논문에서는 기존의 ANCC 보다 복잡도가 낮으면서 밝기변화에도 안정적인 정합 결과를 갖기 위해 Census 변환의 이진 정보를 이용한 스테레오 정합 방법을 제안한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1639-1644
• /
• 2014

SAR satellite can acquire clear imagery regardless of weather and the images are widely used for land management, natural hazard monitoring and many other applications. Automatic image matching technique is necessary for management of a huge amount of SAR data. Nevertheless, it is difficult to assure the accuracy of image matching due to the difference of image-capturing attitude and time. In this paper, we compared performances of MI method, FMT method and SIFT method by applying arbitrary displacement and rotation to TerraSAR-X images and changing resolution of the images. As a result, when the features having specific intensity were distributed well in SAR imagery, MI method could assure 0~2 pixels accuracy even if the images were captured in different geometry. But the accuracy of FMT method was significantly poor for the images having different spatial resolutions and the error was represented by tens or hundreds pixels. Moreover, the ratio of corresponding matching points for SIFT method was only 0~17% and it was difficult for SIFT method to apply to SAR images captured in different geometry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.16-16
• /
• 2022

영상유속계는 영상을 이용한 비접촉식 유속계로 하천과 같은 넓은 범위의 유속 및 유량을 간편하게 측정할 수 있다는 장점이 있어 현재 국내외에서 영상유속계의 실용화 연구가 수행되고 있다. 특히 유속 및 유량을 측정하기 위해 카메라 외에 별도의 측정 장비가 필요없기 때문에 드론에 장착하여 표면유속을 측정하는 연구 또한 활발히 이루어지고 있다. 기존 드론 영상을 이용한 표면유속 측정 연구에서는 드론을 측정하고자 하는 하천 영역 위에서 정지하여 영상을 촬영하여 표면유속을 측정하고 있다. 이때 한 화면에 하폭이 다 담기지 않는 넓은 하천의 경우 촬영 위치를 옮겨서 다시 영상을 촬영하거나 하폭이 담길 때까지 비행 고도를 높여 촬영하고 있다. 하지만 촬영 위치를 옮겨 촬영하는 방식의 경우 넓은 하천을 다 담기 위해 여러 번의 촬영을 하고 이를 정합하는 과정이 필요하다는 단점이 있으며 비행 고도를 높여 촬영하는 방식의 경우 촬영 품질 저하로 인해 측정한 유속의 불확도가 크게 산정된다는 단점이 있다. 이에 본 연구에서는 드론을 이동하며 촬영한 연속적인 영상을 이용하여 하천의 표면유속을 측정하는 방법에 대한 연구를 수행하였다. 하천을 가로질러 비행하며 촬영한 드론 이동영상을 활용하면 폭이 넓은 하천의 경우도 간편하게 유속 분포를 측정할 수 있다. 이동영상을 이용하여 유속을 측정하기 위해서는 연속된 이동영상 내에서 지표면의 공통된 특징점을 찾아 흔들림 보정 알고리즘을 적용하여 유속을 산정하는 방법과 드론의 이동 속도를 이용하여 영상의 수표면 이동속도와 벡터연산을 적용하는 두가지 방법을 사용할 수 있다. 이 두가지 방법 중 영상 분석에 필요한 전처리 과정이 적고 지표면의 고정점이 필요 없는 드론의 이동속도를 이용한 벡터 연산을 적용하는 방법을 실제 흐름에 적용하였다. 측정한 수표면의 유속을 전자파표면유속계로 측정한 유속과 비교한 결과 평균 5 % 이내의 차이를 보이는 것을 확인하였다. 향후 다양한 흐름 조건과 드론의 비행속도를 변경하여 측정하는 등의 유속 측정 적용성을 검토하는 연구가 수행된다면 하폭이 넓은 하천 등 다양한 조건에서 드론 영상을 이용한 유속 측정이 가능할 것으로 기대한다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.265-269
• /
• 2003

최근 인공위성 영상자료는 주기적인 획득 시기를 가지고 있고 수치 지형도에 비해 쉽게 인지할 수 있기 때문에 지형변화 모니터링 분야에서 활발하게 이용되고 있다 그러나 인공위성 영상자료들은 촬영조건 및 센서의 특성에 따라 다른 기하학적인 왜곡을 포함하고 있을 뿐만 아니라 공간, 방사 및 분광 해상도가 상이하기 때문에 정밀한 분석 결과 산출에 어려움이 있다. 즉, 두 개 이상의 영상을 비교 분석하기 위해 기본적인 센서 정보의 차이에서 발생하는 정오차를 소거하고 지형기복에 의해 발생하는 부정오차를 제거하기 위한 정밀 기하보정은 반드시 선행되어야 한다. 따라서, 본 연구에서는 공간해상도가 다르기 때문에 발생하는 정오차 및 부정오차를 제거하기 위해 정밀정합을 실시하였다. 정밀 정합된 kompsat EOC 및 Landsat TM 영상으로 토지피복 변화를 탐지함으로써 위치정확도가 높은 탐지결과를 얻을 수 있었다. 정확한 위치정보를 가지는 탐지 결과는 지형지물의 갱신이나 다양한 GIS 응용의 기본자료로서 사용할 수 있을 것으로 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.81-90
• /
• 2004

Because satellite images include geometry distortions according to photographing conditions and sensor property, and their spatial and radiational resolution and spectrum resolution are different, it is so difficult to make a precise results of analysis. For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased. The result of change detection using basic map could be used for basic data fur GIS application and topographical renovation.

• Explosives and Blasting
• /
• v.38 no.3
• /
• pp.1-14
• /
• 2020

Stereophotogrammetry can be used for accurate and fast investigation of over-break or under-break which may form during the blasting of underground space. When integrated with small unmanned aerial vehicles(UAVs) or drones, stereophotogrammetry can be performed much more efficiently. However, since previous research are mostly focused on surface environments, underground applications of drone-based stereophotogrammetry are limited and rare. In order to expand the use of drone-based stereophotogrammetry in underground environments, this study investigated a rock surface of a underground mine through drone-based stereophotogrammetry. The accuracy of the investigation was evaluated and analyzed, which proved the method to be accurate in underground environments. Also, recommendations were proposed for the image acquisition and matching conditions for accurate and efficient application of drone-based stereophotogrammetry in underground environments.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.547-557
• /
• 2014

This paper presents a method for designing circular template used in similarity measurement for image registration. Circular template has translation and rotation invariant property, which results in correct matching of control points for image registration under the condition of translation and rotation between reference and sensed images. Circular template consisting of the pixels located on the multiple circumferences of the circles whose radii vary from zero to a certain distance, is converted to two-dimensional Discrete Polar Coordinate Matrix (DPCM), whose elements are the pixels of the circular template. For sensed image, the same type of circular template and DPCM are created by rotating the circular template repeatedly by a certain degree in the range between 0 and 360 degrees and then similarity is calculated using mutual information of the two DPCMs. The best match is determined when the mutual information for each rotation angle at each pixel in search area is maximum. The proposed algorithm was tested using KOMPSAT-2 images acquired at two different times and the results indicate high accurate matching performance under image rotation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.219-224
• /
• 2019

Purpose: The image registration of radiographic image and digital surface data is essential in the computer-guided implant guide system. The purpose of this study was to examine the effects of using micro-screw on the working time and convenience of operators in the process of image matching for guided implant surgery. Materials and methods: A mandibular dental model was prepared in partial edentulism for Kennedy class I classification. Two micro-screws were placed on the each side of retromolar area. Radiographic and scan images were taken using computed-tomography and digital scanning. The images were superimposed by 12 operators in software in two different conditions: using remaining teeth image alone and using teeth and micro-screws images. Working time, operator convenience and satisfaction were obtained, and analyzed using the Mann-Whitney U test (${\alpha}=.05$). Results: The working time was not statistically different between image registration conditions (P>.05); however, operator convenience and satisfaction were higher in the teeth and micro-screw assisted condition than in the teeth-alone assisted condition (P<.001). Conclusion: The use of micro-screw for the image registration has no effect in working time reduction, but improves operator convenience and satisfaction.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.523-530
• /
• 2019

The purpose of this study was to obtain the K-edge images using a spectral CT system based on a photon-counting detector and implement the 3D fusion imaging using the conventional and spectral CT images. Also, we evaluated the clinical feasibility of the 3D fusion images though the quantitative analysis of image quality. A spectral CT system based on a CdTe photon-counting detector was used to obtain K-edge images. A pork phantom was manufactured with the six tubes including diluted iodine and gadolinium solutions. The K-edge images were obtained by the low-energy thresholds of 35 and 52 keV for iodine and gadolinium imaging with the X-ray spectrum, which was generated at a tube voltage of 100 kVp with a tube current of $500{\mu}A$. We implemented 3D fusion imaging by combining the iodine and gadolinium K-edge images with the conventional CT images. The results showed that the CNRs of the 3D fusion images were 6.76-14.9 times higher than those of the conventional CT images. Also, the 3D fusion images was able to provide the maps of target materials. Therefore, the technique proposed in this study can improve the quality of CT images and the diagnostic efficiency through the additional information of target materials.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2012

The stagnant growth in 3D market due to 3D movie contents shortage is encouraging development of techniques for production cost reduction. Elimination of vertical disparity generated during image acquisition requires heaviest time and effort in the whole stereoscopic film-making process. This matter is directly related to competitiveness in the market and is being dealt with as a very important task. The removal of vertical disparity, i.e. image rectification has been treated for a long time in the photogrammetry field. While computer vision methods are focused on fast processing and automation, photogrammetry methods on accuracy and precision. However, photogrammetric approaches have not been tried for the 3D film-making. In this paper, proposed is a photogrammetry-based rectification algorithm that enable to eliminate the vertical disparity precisely by reconstruction of geometric relationship at the time of shooting. Evaluation of proposed algorithm was carried out by comparing the performance with two existing computer vision algorithms. The epipolar constraint satisfaction, epipolar line accuracy and vertical disparity of result images were tested. As a result, the proposed algorithm showed excellent performance than the other algorithms in term of accuracy and precision, and also revealed robustness about position error of tie-points.