• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.821-825
• /
• 2014

Steam gasification of sawdust char was performed in a thermobalance reactor at high temperature. Gasification temperature was changed from $850^{\circ}C$ to $1400^{\circ}C$ and steam partial pressure was 0.3, 0.5 and 0.7 atm. Three models of gas-solid reaction were applied to the reaction kinetics analysis and modified volumetric model was an appropriate model. Reaction control regime and diffusion control regime were distinct depending on the temperature. Apparent activation energy and pre-exponential factors for both of the regimes were evaluated and the effects of steam partial pressure were examined. $H_2$ concentration in the produced gas was two times higher than that of CO due to the gasification accompanying by the water gas shift reaction.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.345-348
• /
• 2008

본 연구에서는 가스화 반응, 수성가스 전환 반응, 메탄화 반응 등으로 구성된 SNG제조 공정에 대한 해석을 통해, 석탄 촤의 가스화 반응에 의해 생성된 합성가스를 이용한SNG제조 공정 특성을 파악하고자 하였고, SNG제조 공정 중 가스화 공정에 대한 실험을 통해 가스화 공정의 조건에 따른 합성가스 발생 특성 및 메탄화 반응의 특성을 살펴보았다. 석탄 촤를 대상으로 하여 가스화 공정의 $O_2$/feed ratio와 steam/feed ratio 조건 변화에 따른 합성가스 발생 특성을 살펴본 결과 steam을 투입하지 않은 경우 발생되는 합성가스 중 CO의 농도는 55$\sim$65%, $H_2$ 9$\sim$11%, $CO_2$ 24$\sim$29% 범위였고, $O_2$/feed ratio가 증가할수록 CO의 농도는 증가하고, $H_2$와 $CO_2$의 농도는 감소하는 경향을 나타내었다. 또한,steam을 투입하는 경우 합성가스 중 CO의 농도는 20$\sim$37%, $H_2$ 16$\sim$18%, $CO_2$ 42$\sim$55% 범위였다. 메탄화 공정 해석 결과 메탄의 농도를 최대로 얻을 수 있는 조건은 $H_2$/CO 비가 3인 조건이었고 온도가 낮을 수록 생성농도가 높아짐을 알 수 있었다. 가스화 특성 실험 결과 및 공정해석 결과, 메탄화 반응에 대한 실험 및 공정해석 결과는 고체시료의 가스화 반응을 통해 발생한 합성가스를 이용한 SNG 제조 공정 특성 파악 및 SNG를 제조하기 위해 필요한 단위 공정에 대한 설계 자료 및 운전조건을 결정할 수 있는 주요 인자로 활용될 수 있을 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.746-754
• /
• 2015

In this study, we investigated the effects of the temperature on the coal/biomass $char-CO_2$ gasification reaction under isothermal conditions of $700{\sim}900^{\circ}C$ using the lignite(Indonesia Eco coal) with biomass (korea cypress). Ni catalysts were impregnated on the coal by the ion-exchange method. Four kinetic models which are shrinking core model (SCM), volumetric reaction model (VRM), random pore model (RPM) and modified volumetric reaction model (MVRM) for gas-solid reaction were applied to the experimental data against the measured kinetic data. The Activation energy of Ni-coal/biomass, non-catalyst coal/biomass $Char-CO_2$ gasification was calculated from the Arrhenius equation.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.445-453
• /
• 2012

In this study the effects of particle size and water content on the yields and physical/chemical properties of pyrolytic products were investigated through fast-pyrolysis of yellow poplar. Water content was critical parameters influencing the properties of bio-oil. The yields of bio-oil were increased with decreasing water content. However, the yield of pyrolytic product was not clearly influenced by feedstock's particle size. The water content, pH and HHV (Higher Heating Value) of bio-oil were measured to 20~30%, 2.2~2.4 and 16.6~18.5MJ/kg, respectively. The water content of feedstock was clearly influenced to water content of bio-oil. In terms of bio-char, HHV of them were measured to 26.2~30.1 MJ/kg with high content of carbon over 80%.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.309-317
• /
• 2011

The effect of physical properties of coal fuels and carbon particle on performance of DCFC (Direct Carbon Fuel Cell) was investigated. Shenhua and Adaro were selected as coal fuel and carbon particle was used for comparing with coal. The Ultimate, proximate, SEM, XRD, and BET analysis of samples were conducted. The component of char was more important than that of raw coal because the operating temperature of reactor is higher than devolatilization region of coal. The surface area and volume of pores affected significantly the performance of the system than content of fixed carbon or char rates. The performance of DCFC with carbon particle was in proportional to working temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.704-710
• /
• 2014

Biomass is considered an alternative energy which can solve an greenhouse gas problem like $CO_2$ which is a major contributor to global warming. The biomass can be converted to various energy sources through thermochemical conversion. In this study, a continuous gasifier was engineered for a wood biomass gasification. The biomass was used a waste wood. The experiments of $CO_2$ gasification were achieved as the gasification temperature, moisture content and input $CO_2$ concentration. The results showed that the yield of producer gas increased with an increasing the gasification temperature. The amount of the light tar increased due to the decomposition of gravimetric tar by the thermal cracking, and the char was confirmed pore development through the SEM analysis. The CO concentration was increased with an increased input $CO_2$ concentration from Boudouard reaction. Through the parametric screening studies, the hydrogen and carbon monoxide concentration were 32.91% and 48.33% at the optimal conditions of this test rig.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.884-894
• /
• 2011

Effects of temperature, volatile content, particle diameter and solid input weight were investigated in the batch fluidized bed reactor using OCN703-1100 particle as oxygen carrier and Roto coal and char as fuels. Two solid fuels represented the best reactivity at different temperature, $900^{\circ}C$ for Roto coal and $950^{\circ}C$ for char, respectively. However, we selected $900^{\circ}C$ as the best operating temperature because the improvement of reactivity of char at $950^{\circ}C$ was negligible. Char represented better reactivity than Roto coal because char contains low volatile than Roto coal. For both solid fuels, reactivities were improved with increasing of the particle diameter. These results were explained by solid mixing tests in a transparent fluidized bed using two char particles having different particle size ranges and OCN703-1100 particle. The bigger particle showed better solid mixing with OCN703-1100 particle, and therefore, represented better reactivity. For both solid fuels, reactivities were improved with increasing of the solid input weight within the experimental conditions of this study because the weight of coarse particles increased with the solid input weight increased, and therefore, these coarse particles can mix well with the oxygen carrier.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1034-1042
• /
• 2012

This study was performed by using an LFR (laminar flow reactor), which can be used to carry out different types of research on coal. In this study, an LFR was used to analyze coal flames, tar and soot yields, and structures of chars for two coals depending on their volatile content. The results show that the volatile content and oxygen concentration have a significant effect on the length and width of the soot cloud and that the length and width of the cloud under combustion conditions are less than those under a pyrolysis atmosphere. At sampling heights until 50 mm, the tar and soot yields of Berau (sub-bituminous) coal, which contains a large amount of volatile matter, are less than those of Glencore A.P. (bituminous) coal because tar is oxidized by the intrinsic oxygen component of coal and by radicals such as OH-. On the other hand, at sampling heights above 50 mm, the tar and soot yields of Berau coal are higher than those of Glencore A.P. coal by reacted residual volatile matter, tar and light gas in char and flame. With above results, it is confirmed that the volatile matter content and the intrinsic oxygen component in a coal are significant parameters for length and width of the soot cloud and yields of the soot. In addition, the B.E.T. results and the images of samples (SEM) obtained from the particle separation system of the sampling probe support the above results pertaining to the yields; the results also confirm the pore development on the char surface caused by devolatilization.

• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.269-275
• /
• 2002

Experimental studies are carried out to find the behavior of sulfur compounds which are evolved during high temperature pyrolysis of coals at the smelting reduction process for iron ore. Three kinds of bituminous coals, such as Hunter & Mt. Thorley (Australia), and Ensham (South Africa) are used. And forms of sulfur compound and their amounts are analyzed at the temperature ranges of 800~110$0^{\circ}C$. Then H$_2$S is the major gas, but CS$_2$ and COS are minor gases. Sulfur compounds in three coals are distributed into the volatiles (gas & tar) and coal char as the ratio of approximately 50%：50%, respectively.

• Journal of the Korean Society of Combustion
• /
• v.17 no.2
• /
• pp.32-39
• /
• 2012

In this study, pre-processor code based on structural behavior of coal is applied to predict yields, pyrolysis rate and compositions of volatile and char. These parameters are used in the devolatilization and char burnout sub-models as user-defined functions of commercial CFD code. The predicted characteristics of these sub-models are compared with those employing the conventional model based on experiment and validated against the measurement of a 2.1 MW swirling pulverized coal flame in a semi-industrial scale furnace. And the influence of the turbulence-chemistry interaction on pulverized coal combustion is analyzed.