• Title/Summary/Keyword: 총 음압

Search Result 34, Processing Time 0.026 seconds

Sound Sensation and Its Related Objective Parameters of Nylon Fabrics for Sports Outerwear (스포츠 아우터웨어용 나일론 직물의 소리 감각과 이와 관련된 객관적 파라미터들)

  • Yi, Eunjou;Cho, Gilsoo
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.25 no.9
    • /
    • pp.1593-1602
    • /
    • 2001
  • 본 연구는 스포츠 아우터웨어용 나일론 직물의 소리에 대한 주관적 감각과 이에 관련된 객관적 측정치를 규명하기 위하여, 서로 다른 8종의 나일론 직물의 소리의 스펙트럼 파형을 고찰하였으며, 소리 파라미터로 총음압(level pressure of total sound, LPT),세 가지 AR (autoregressive)계수, Zwicker의 심리음향학적 모델에 따른 크기(Z)와 날카로움(Z)를 계산하였고, Kawabata Evaluation System(KES)으로 직물의 물리적 성질을 측정하였다. 주관적 감각 평가를 위하여 피험자에게 녹음된 각 직물소리를 들려주어 7개 소리 감각 (부드러움, 시끄러움, 날카로움, 맑음, 거 침, 높음, 유쾌함)을 의미분별척도로 답하게 한 후, 단계적 선형 회귀식을 이용하여 직물 소리의 주관적 감각에 대한 예측 모델을 제시하였다. 울트라스웨이드를 제외한 태피터 나일론 직물들은 스펙트럼 파형 에서 다른 조성 섬유의 직물들보다 음압 값이 높고, 총음압이 60dB 안팎의 값을 보여, 착용자에게 불쾌감을 줄 것으로 예상되었으며, 주관적 감각 평가에서도 소리의 부드러움과 맑음, 유쾌함에서 음의 점수를, 시끄러움과 날카로움, 거침, 높음에서 양의 점수를 얻었다. 주관적 감각의 예측모델에서 총음압은 시끄러움과 거침에 정적 영향을, 유쾌함에 부적 영향을 미쳐서 나일론 직물 소리의 총음압이 50dB 이하일 때 주관적으로 유쾌하게 느껴지는 것으로 나타났다.

  • PDF

Relationship between Rustling sounds and Physical Properties of Suiting Fabrics (슈트용 직물의 스치는 소리와 물성간의 관계)

  • 조질수;이은주
    • Science of Emotion and Sensibility
    • /
    • v.2 no.1
    • /
    • pp.157-168
    • /
    • 1999
  • 슈트용 직물을 대상으로 직물이 스치는 소리를 재현하여 이를 녹은하고 FFT 분석을 통하여 얻은 음향 스펙트럼을 기초로 음색을 정량화할 수 있는 요인을 개발하여, 음색 요인과 KES system에 의해 측정한 직물의 물리적 성진 간의 관계를 고찰하고자 하였다. 직물 소리의 음향 스펙트럼을 기초로 하여 최고 음압과 최저 음압의 차이인 ΔL과 최고와 최저 음압에 해당되는 주파수 간 차이인 Δf, 총음압 LPT의 세가지 요인을 음색 요인으로 정하여 각 직물의 음색 요인 값을 추출하였고, KES를 이용하여 각 직물의 17개의 물리적 성질의 수치를 구하였다. 세 가지 음색 요인과 직물의 물리적 성질 간의 상관관계에서 ΔL은 직물의 인장 회복력과 두께와 유의적인 상관관계를 Δf는 직물의 인장 선형성화 전단성질, 압축에너지, 무게와 유의적인 상관관계를 보이며, LPT는 최대하중시 신장성, 인장 선형성, 인장 에너지와 유의적인 상관관계를 보이는 것으로 나타났다. 세 가지 음색 요인과 직물의 물리적 성질 간의 단계별 희귀관계에서는 LPT가 직물의 물리적 성직(EM, MIU, RC, LT)에 의해 가장 잘 설명되는 것으로 나타났다. 이와 같은 결과를 바탕으로 본 연구에서 시도한 절량화된 음색은 직물의 물리적 성질과 유의한 관계를 가짐을 확인하였다.

  • PDF

Comparative Analysis on the Sound Characteristics of Riffles and Pools (여울과 소의 소리특성 비교 분석)

  • Kang, Su-Jin;Kang, Joon-Gu;Kim, Jong-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.12
    • /
    • pp.878-886
    • /
    • 2018
  • This study quantified the sounds of riffles and pools in natural rivers and conducted a comparative analysis of the frequency and sound pressure per flow velocity. The surveyed area was Namdaecheon basin in Yangyang-gun, Gangwon-do and the sounds of a total of 23 sites were analyzed. A hydro microphone was used to measure the sound and analyze the data using an acoustic analysis program. The location was also selected at places with minimal ambient noise and the measurement points were the depth of riffles and pools. The results revealed an average difference of 0.515 m/s for flow velocity at 8 riffles and 15 pools. The difference in sound pressure occurred due to the flow velocity. In the case of sound pressure, it was measured at an average of 176.8 dB for riffles and 168.2 dB for pools, demonstrating a difference of approximately 8.6 dB. Furthermore, in the case of maximum sound pressure, riffles showed a constant range between 200 Hz and 250 Hz, while the pools exhibited maximum sound pressure at various frequencies from 200 Hz to 1,000 Hz. This revealed the ecological stream reproduction, development of preferred sound sources for aquatic life, and design of structures.

A Numerical Study on Analysis of Low Frequency Aero-acoustic Noise for a HAWT of NREL Phase VI (NREL Phase VI 수평축 풍력터빈의 저주파 공력소음 해석에 관한 수치적 연구)

  • Mo, Jang-Oh;Lee, Young-Ho
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.33 no.8
    • /
    • pp.1170-1179
    • /
    • 2009
  • The purpose of this work is to predict the low frequency aero-acoustic noise generated from the horizontal axis wind turbine, NREL Phase VI for the whole operating conditions of various wind speeds using large eddy simulation and Ffowcs-Williams and Hawkings model provided in the commercial code, FLUENT. Because there is no experimental data about wind turbine noise, we first of all compared aerodynamic performance such as shaft torque and power with experimentally measured value. Performance results show a good agreement with experimental data within about 0.8%. As the wind speed increases, the overall sound pressure level and the sound pressure level by the quadrupole and dipole source show a increasing tendency. Also, sound pressure level is proportional to $r^{-2}$ in the near field and $r^{-1}$ in the far field according to the increase of distance from the center of hub of wind turbine. According to 2 times increase of distance, sound pressure level is reduced by about 6dB.

Basic and Mechanical Properties by Film Type to Minimize the Sound Pressure Level of PTFE Laminated Vapor-permeable Water-repellent Fabrics (PTFE(Polytetrafluoroethylene) 라미네이팅 투습발수직물의 총음압 최소화를 위한 필름 타입 별 기본 특성과 역학 특성)

  • Lee, Kyu-Lin;Lee, Jee-Hyun;Jin, Eun-Jung;Yang, Youn-Jung;Cho, Gil-Soo
    • Fashion & Textile Research Journal
    • /
    • v.14 no.4
    • /
    • pp.641-647
    • /
    • 2012
  • This study investigates the sound properties of fabric frictional sound (SPL, ${\Delta}L$, ${\Delta}f$) according to the film type of PTFE laminated vapor-permeable water-repellent fabrics in order to understand the relationship between SPL and the basic properties of fabrics such as layer, yarn type, and thickness of fiber. This study accesses their mechanical properties and determines how to control them to minimize SPL. Eight PTFE laminated water-repellent fabrics, composed of four different film types (A, B, C, D) and with two different fabrics, were used as test specimens. Frictional sounds generated at 1.21m/s were recorded by using a fabric sound generator and SPLs were analyzed through Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured by KES-FB. The SPL value was lowest at 74.4dB in film type A and highest as 85.5dB in type D. Based on ANOVA and post-hoc test, specimens were classified into less Loud Group (A, B) and Loud Group (C, D). It was shown that SPL was lower when 2 layer (instead of 3 layer), filament yarn than staple, and thin fiber than thick were used. In Group I, shearing properties (G, 2HG5), geometrical roughness (SMD), compressional properties (LC, RC) and weight (W) showed high correlation with SPL however, elongation (EM) and shear stiffness (G) did with SPL in Group II.

A experimental study for the characteristics of impulse noise caused by shooting of K-7 silenced assault rifle (K-7소음총의 사격음 특성에 대한 실험적 연구)

  • Lee Jin-Ho
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.7 no.4 s.19
    • /
    • pp.36-43
    • /
    • 2004
  • In 1909 Hiram P. Maxim invented one of the first metal silencers for reducing sound levels in firearms. Silenced me have been mainly applied in the hunting and military operation. In particular special force make use of silenced rifle because it is low sound level. This paper considers experimental analysis for the characteristics of shock wave caused by shooting of a silenced me. Experimental results Indicate that the sound level of K-7 silenced rifle was lower than the sound level of MP5 silenced rifle. And, Sound Power Level of K-7 silenced rifle at a distance more than 75m or loom have nearly the constant value. This results that suggested the characteristics data about K-7 rifle's impulse noise will be apply to design the silencer of a small arms.

Complete denture rehabilitation of edentulous patient with severe alveolar bone resorption using mandibular suction denture with closed mouth technique: a clinical report (치조골 흡수가 심한 완전 무치악 환자에서 폐구인상법을 이용한 총의치 수복 증례)

  • Ko, Chang Woo;Min, Byungkwee;Yang, Hong-so;Lim, Hyun-Pil;Yun, Kwidug;Shin, Jin-Ho
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.34 no.1
    • /
    • pp.56-62
    • /
    • 2018
  • When it comes to treat patient with loss of vestibule, conventional denture impression have limitation which can cause problems of excessive border extension. Suction denture with closed mouth technique which was introduced to solve this problem, forms negative pressure being sealed denture flanges by mobile mucosa when the patient swallows and chews. Also, it can decrease patient's visiting time by taking impression and gothic arch tracing at once. In this case, considering patient's chief complain which is a loose fit of present lower denture, suction dentures with closed mouth technique was planned.

Complete denture rehabilitation in the edentulous patient with severe mandibular bone resorption and vascular malformation using closed mouth impression and monoplane occlusion: A case report (심한 하악골 흡수와 혈관기형을 보이는 무치악 환자에서 폐구인상법과 단일평면교합법을 이용한 총의치 수복 증례)

  • Kim, Jae-Hyun;Cho, Hye-Won
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.2
    • /
    • pp.220-227
    • /
    • 2021
  • A patient failed to use conventional complete dentures due to severe mandibular bone resorption and soft tissue hyperplasia on lips, tongue and oral vestibule from vascular malformation. The treatment of choice would be an implant-retained overdenture, however, he refused owing to high cost. The closed mouth impression technique using BPS principle, CR record registration with gothic arch tracing and monoplane occlusion using non-anatomic teeth were used to fabricate complete dentures for this patient. Patient satisfaction, the retention and the stability of complete dentures were highly improved as a result.

Psychophysiological Study for the Development of Sensible Textiles (감성 의류 소재 개발을 위한 직물 마찰 소리의 심리생리학적 연구)

  • 조자영;이은주;조길수;손진훈
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 2001.05a
    • /
    • pp.54-59
    • /
    • 2001
  • 본 연구는 청각적 감성을 만족시키는 의류소재의 개발을 위해, 직물 마찰음에 대한 인간의 감서을 생리반응측정과 심리적·주관적 평가를 통해 파악하고, 직물 마찰음이 갖는 음향특성과의 관련성을 고찰하였다. 이를 위해 직물 마찰음의 음향특성을 분석하고, 직물 마찰음에 대한 감각·감성 표현어(부드러움, 시끄러움, 유쾌함, 날카로움, 맑음, 거침, 높음)를 이용하여 주관적 평가를 실시하였으며, 생리적 반응으로서의 뇌파 및 혈류량, 심박변화율, 피부전도수준 등을 측정하였다. 주관적 감각·감성은 대부분 직물 소리의 크기와 관련이 깊은 것으로 나타나, loudness(Z)와 총음압 LPT가 증가할수록 시끄럽고 거칠며 딱딱하고 불쾌하며 탁하다고 지각하였다. 생리적 반응과 관련하여서는, 부드럽고 조용하며 맑다고 지각할수록 slow alpha파가 증가하였고, 유쾌하고 매끄럽다고 평가할수록 혈류량은 증가하였다. 또한, 높다고 지각하는 소리에 대한 LF/HF는 증가하였다. 마찰음의 음향특성이 생리적 반응에 미치는 영향으로서, LPT가 혈류량의 감소에, Loudness(Z)가 피부전도수준의 증가에 각각 영향을 미치며, sharpness(Z)가 높고 ΔL이 작을수록 LF/HF는 증가하는 것으로 나타났다.

  • PDF

Sound Characteristics and Performance of Helicopter Anti-Torque System (헬리콥터 반토오크 시스템 성능 및 소음특성)

  • Lee, Je-Dong;Song, Keun-Woong;Chung, Ki-Hoon;Kang, Hee-Jung;Kim, Seung-Bum
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.690-695
    • /
    • 2006
  • This paper described the Performance test and sound characteristics of helicopter 'Tail-Fan' anti-torque system. In this research, Korea Aerospace Research Institute(KARI) developed 'Tail-Fan' anti-torque system for a helicopter and carried out performance and sound capturing tests of even and uneven tail fans. The performance test is carried out and the noise signals which are generated during the test are saved with microphones at the same time. The performance test's results meet the design requirements. Tone-corrected perceived noise level is reduced by replacing the even product with the uneven one.

  • PDF