• Title/Summary/Keyword: 초정

Search Result 86, Processing Time 0.023 seconds

Solidification Behavior of 3%C-5%Mo-5%W-10%(Cr or V) White Cast Irons (3%C-5%Mo-5%W-10%(Cr or V) 백주철의 응고거동에 관현 연구)

  • Ryu, Seong-Gon
    • Korean Journal of Materials Research
    • /
    • v.10 no.2
    • /
    • pp.144-147
    • /
    • 2000
  • 10%C-5%Mo-5%W-10%Cr 및 10%C-5%Mo-5%W-10%V 백주철의 응고거동을 열분석을 통하여 연구하였다. 15Kg 용량의 고주파 유도옹해로에 선철, 고철, Fe-Mo, Fe-W, Fe-Cr, Fe-V 등을 장입시켜 용해시킨 후 슬래그를 제거시키고 $1550^{\circ}C$에서 Y블럭의 펩 주형에 주입하였다. 응고거동을 조사하기 위하여 50g을 Y블럭에서 채취한 뒤 알루미나 도가니에 넣어 재용해시킨 후 1$0^{\circ}C$/min의 냉각속도로 냉각시키면서 여섯 종류의 다른 온도에서 도중에 급냉시켜 응고조직을 광학현미경으로 관찰하였다. 10%C-5%Mo-5%W-10%Cr 백주철의 경우 초정 오스테나이트, 오스테나이트와 M(sub)7C(sob)3의 공정, 오스테나이트와 M(sub)6C의 공정으로, 10%C-5%Mo-5%W-10%V 백주철의 경우 초정 MC, 오스테나이트와 MC의 공정, 오스테나이트와 M(sub)2C의 공정으로 각각 순차적으로 정출하였다. 정출하였다.

  • PDF

Effect of Cr/Ni equivalent ratio on ductility-dip cracking in AISI 316L austenitic stainless steel weld metals ($Cr_{eq}/Ni_{eq}$ 당량비에 따른 AISI 316L 스테인리스강의 연성저하균열 특성에 대한 연구)

  • Jang, A.Y.;Lee, D.J.;Kim, Y.H.;Choi, C.H.;Lee, S.H.;Byun, J.C.;Jung, G.H.;Lee, H.W.
    • Proceedings of the KWS Conference
    • /
    • 2009.11a
    • /
    • pp.56-56
    • /
    • 2009
  • AISI 316L 스테인리스강에 새롭게 디자인한 서로 다른 3가지 응고모드를 가진 와이어로 FCAW(Flux Cored Arc Welding)을 하였다. 각각의 3가지 와이어는 Pseudobinary phase diagram에 따라 AF, FA, F모드를 가졌다. 미세조직은 $Cr_{eq}/Ni_{eq}$이 증가할수록 델타 페라이트 함량이 증가하였으며, 초정 상의 경우 초정 오스테나이트에서 초정 페라이트로 변태하였고, 연성저하균열의 민감도가 감소하였다. 연성저하균열은 이동결정립계의 형상에 따라 좌우되며, 미량의 페라이트를 함유한 오스테나이트에서는 페라이트가 핀(Pin) 역할을 제대로 하지 못하여 직선형태의 이동 결정립계 따라 입계 미끄러짐의 메커니즘을 통해 전파되었으며, 곡선형태의 이동 결정립계에서는 델타 페라이트가 핀 역할을 하여 역할을 하여 구속 상태에서 응력집중을 막고 응력을 분산시켜 균열이 전파되는 것을 방해하여 균열이 발생되지 않았다.

  • PDF

A Study on Solidification and Wear Character of Multi-alloyed White Cast Iron

  • Yu, Sung-Kon;Matsubara, Yasuhiro
    • Journal of Korea Foundry Society
    • /
    • v.20 no.4
    • /
    • pp.260-268
    • /
    • 2000
  • 응고 및 마모거동을 연구하기 위하여 Cr, V, Mo 및 W의 조성이 다른 3종류의 백주철을 주조하였다. 고주파유도용해로에서 장입시켜 1873K까지 승온시켜 장입원료들을 모두 용해시킨 후 1823K에서 Y블럭주형에 주입하였다. 얻어진 3종류의 백주철조성은 다음과 같다: Fe-3%C-10%Cr-5%Mo-5%W(합금1), Fe-3%C-10%V-5%Mo-5%W(합금2) 및 Fe-3%C-17%Cr-3%V(합금 3)응고과정을 추적하기 위하여 각 시편으로부터 50g을 채취한 후 알루미나도가니에 넣고 실리콘카바이드로를 사용하여 1723K의 알콘분위기하에서 재용해를 시켰다. 용금을 10K/분의 속도로 냉각시키면서 열분석을 행하였으며 도중 몇 차례 소입 실험을 병행하였다.합금1의 경우 초정오스테나이트, (오스테나이트+$M_7C_3$)공정, (오스테나이트+$M_6C$)공정, 합금2의 경우 초정 MC, 초정오스테나이트, (오스테나이트+MC)공정 , (오스테나이트+$M_2C$)공정, 합금3의 경우 초정 $M7C_3$와 (오스테나이트+$M_7C_3$)공정으로 구성되어 있었다. 주방상태, 균질화열처러상태, 공냉상태, 템퍼링상태에서 내마모시험을 행하였다. 먼저 주방상태시 편을 진공분위기하에서 1223K에서 5시간동안 균질화열처리를 행한후 로냉을 시켰다. 다시 이 시편을 1323K에서 2시간 유지후 강제공냉을 시켰으며 강제공냉된 시편을 573K에서 3시간동안 템퍼링처리를 하였다. 내마모시험은 120 mesh마모지에 10N의 하중을 가하여 실시하였다. 각 사이클마다 무게감소를 측정하였으며 8번 반복실험을 하였다. 마모량은 균질화열처리시편, 주방상태시편, 템퍼링시편, 공냉시편의 순으로 감소하였다. 합금2가 마모량이 가장 적었으며 합금3이 가장 많았다. 합금2의 마모량이 가장 적은 이유는 조직이 초정 MC, 공정 MC 및 공정 M2C로 구성되어 있기 때문으로 사료된다.주방상태에서 기지조직은 퍼얼라이트이었으나 열처리를 통하여 마르텐사이트, 템퍼드마르텐사이트, 잔류오스테나이트로 변태하였다. 이상의 결과를 종합해 보면 MC가 내마모성에 가장 기여하는 조직으로 판단되어진다.

  • PDF

Effects of Solidification Modes on the Pit Initiation and Propagation in Austenitic Stainless Steel Weld Metals (오스테나이트계 스테인리스강 용착금속의 응고모드가 공식 생성 및 성장에 미치는 영향 x Effects of Solidification Modes on the Pit Initiation and Propagation in Austenitic Stainless Steel Weld Metals)

  • 최한신;김규영;이창희
    • Journal of Welding and Joining
    • /
    • v.16 no.6
    • /
    • pp.59-68
    • /
    • 1998
  • In this study, effects of solidification modes (primary $\delta$-ferrite, primary ${\gamma}$-austenite) on the pit initiation and propagation in the 304L and 316L austenitic stainless steel weld metals were investigated. The solidification mode of weld metal was controlled by the addition of nitrogen to Ar shielding gas. Through the electrochemical experiments (potentiodynamic anodic polarization and potentiostatic time-current transient test) and metallographic examination (microstructure and elemental distribution), the following results were obtained. The more the volume content of nitrogen in the shielding gas were, the lower critical current density for passivity was observed. In comparison with weldments solidified through the primary $\delta$-ferrite solidification mode and the primary ${\gamma}$-solidification mode, the former showed higher critical pitting potential and a longer incubation time for stable pit initiation than the latter. However, in the pit propagation stage the former exhibited a faster dissolution rate than the latter. These results were believed to ee related to the distribution of alloying elements such as Cr, Mo, Ni and S.

  • PDF

A Study on the View on Nature in Ch'o-Jung's Three-Verse Poems(Sijo) (초정(艸丁) 김상옥(金相沃) 시조(時調)에 나타난 자연관(自然觀))

  • Choi, Heung-Yeol
    • Sijohaknonchong
    • /
    • v.30
    • /
    • pp.263-300
    • /
    • 2009
  • Adoration for nature constitutes one of the primary subjects that literature has tackled since the origin of human history. Nature expressed through a poet's subjective imagination is the internalized and reorganized nature. This study examines the view on nature enacted in Ch'o-Jung's three-verse poems (sijo) in light of the traditional views on nature implicated in the ancient three-verse poems (koshijo), which is in line with the long-established Oriental view on nature. To dignitaris(sadaebu) in the Chosun Dynasty, nature appeared as the idealistic subject for moral culture ($shims{\breve{o}}ngsuyang$), which also becomes the literary space where the purity and justice of the world view of Neo-Confucianism(Sungrihak) is contained in the form of the three-verse poem, the lyrical poetic space where the "I" is united with nature by way of "enjoying of wind and moon"($umpungnongw{\breve{o}}i$) and "living in quiet retiremen"($yuyuchaj{\breve{o}}k$), and the object for the poetical perception of the surrounding world. Ch'o-Jung' s three-verse odes are found in Reed pipe ($Ch'oj{\breve{o}}k$), Sixty Five Pieces of Three-Verse Odes (Samhaengshi-$yukshipopy{\breve{o}}n$), Autumn Fragrance ($Hyangginam{\check{u}}n-ga{\check{u}}l$), and The Words of Zelko va Tree ($N{\check{u}}tinamu{\check{u}}i-mal$). This study analyzes 212 pieces of Ch'o-Jung' s three-verse poems chosen from theses books. In Ch'o-Jung's poems, the traditional view on nature expressed in the ancient three-verse poems is rendered in such a way that metaphysical understanding of nature is indirectly transmitted through the objective correlatives found nature. Nature is no longer the object of straightforward utterance, but transformed, displaced, and removed: that way, nature gets objectified to form a complicated and multi-layered structure. In conclusion, the view on nature manifested in Ch'o-Jung's three-verse poems is based on traditional metaphysics. Second, nature is the object of lyrical nostalgia and adoration. Third, nature is imbued with the fundamental affection for parents. Fourth, nature is associated with organic life. Fifth, the nature in Ch'o-Jung's poems reveals the beauty of stillness endorsed in Lao-tse's and Chung-tze's philosophy. And last, nature is the agent for self-realization and meditation.

  • PDF

The Distribution Behavior of Alloying Elements in Matrices and Carbides of Chromium White Cast Iron (크롬백주철의 기지조직 및 탄화물에 있어서 합금원소의 거동)

  • Ryu, Seong-Gon
    • Korean Journal of Materials Research
    • /
    • v.10 no.7
    • /
    • pp.489-492
    • /
    • 2000
  • Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

  • PDF

A Study on the Fabrication of Semi-solid Al Alloys by EMS Horizontal Continuous Casting Process (전자교반식 수평연속주조법에 의한 반응고 Al 합금의 제조에 관한 연구)

  • Park, Gi-Beom;Song, Yeong-Bae;Kim, Yeong-Hwan;Kim, Gyeong-Heon;Kim, In-Bae
    • Korean Journal of Materials Research
    • /
    • v.10 no.2
    • /
    • pp.117-123
    • /
    • 2000
  • In this study, to fabricate the semi-solid Al alloy, the 3phase-2poles electromagnetic stirring system was adopted. The changes of primary grain size, aspect ratio, standard deviation, hardness and the size morphology of eutectic Si with pouring temperatures and input voltages were investigated. At the same pouring temperature, with increasing input voltage, aspect ratio, standard deviation and primary grain size were decreased. The optimum condition for fabrication of semisolid Al alloys by EMS horizontal continuous casting process was determined that the input voltage was 220V and the pouring temperature was 68$0^{\circ}C$. At this optimum conditions the primary grain size was 54$\mu\textrm{m}$, the aspect ratio was 1.56 and the size of eutectic Si was 0.5$\mu\textrm{m}$. The micro-hardness of the Al alloy was 72.1 Hv. The semi-solid A356 Al alloy which has very low aspect ratio and standard deviation value could be fabricated by adopting the EMS horizontal continuous casting facility that was manufactured for this study.

  • PDF