• Ceramist
• /
• v.3 no.2
• /
• pp.49-55
• /
• 2000

• 전기의세계
• /
• v.36 no.1
• /
• pp.6-13
• /
• 1987

본고에서는 초전형적외선센서(pyroelectric infrared sensor)를 이용한 적외선검출기에 대하여 주로 언급하고 그 응용분야에 대하여 논하였다.

• Electronics and Telecommunications Trends
• /
• v.7 no.3
• /
• pp.154-164
• /
• 1992

고온초전도체의 전자응용 예를 들면, 죠셉슨접합과 같은 diode-type 의 초전도소자 뿐만 아니라 반도체 트랜지스터와 같은 고온초전도 삼단자소자의 개발 및 실용화를 위해서 해결해야 할 당면문제는 많다. 그 중에서 특히, 실리콘 기판위에 고온초전도 단결정박막을 성장시키는 것과 양질의 유전체 buffer층을 제조하는 것등이 있다. 초전도체/반도체구조에서 초전도전자쌍은 근접효과에 의해 반도체속으로 확산되어 가며, 이러한 현상을 이용하여 초전도 트랜지스터와 초전도 전자파소자와 같은 신기능 초전도소자를 구현할 수 있다. 그리고 이들 소자의 동작원리는 반도체속에서의 초전도 파동함수(질서파라미터)의 제어에 기초를 두고 있다. 고온초전도 일렉트로닉스를 겨냥하며, 중요한 응용으로서 거론되고 있는 분야는 1) one-wafer computer의 꿈을 실현하기 위한 기반기술로 꼽고 있는 초전도배선연구, 2) 성능에서 반도체소자를 능가하는 초전도소자, 3) 21세기를 전망하면서 집적회로 연구자들의 타깃이 되고 있는 초전도집적회로 및 일렉트로닉스, 그리고 4) 광범위한 응용이 기대되는 초정밀 센서인 SQUID 소자 등이 있다.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.103-110
• /
• 1998

Pyroelectric infrared detectors based on La-modified $PbTiO_{3}$ (PLT) thin films have been fabricated by RF magnetron sputtering and rnicrornachining technology. The detectors form $Pb_{l-x}La_{x}Ti_{1-x/4}O_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polymide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively etched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of $8.5{\times}10^{8}cm{\cdot}\sqrt{Hz}/W$ at room temperature and it is about 100 times higher than the case of micromachining technology is not used. A sensing system that detects the position as well as the existence of a human body is realized using the array sensor.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.226-231
• /
• 1999

Pyroelectric infrared sensors have been fabricated using P(VDF/TrFE) film with pyroelectric effect. The weight percent and thickness of the poled P(VDF/TrFE) film are 75/25 percent and $25\;{\mu}m$ respectively. For easier fabrication and connection method new top and bottom electrodes design was adapted for human body detecting pyroelectric infrared sensor. An aluminum infrared absorption electrode and bottom electrode were deposited by thermal evaporator. And the device was mounted in TO-5 housing to detect infrared light of $5.5{\sim}14\;{\mu}m$ wavelength. The responsibility, NEP (noise equivalent power) and specific detectivity $D^*$ of the device were $9.62{\times}10^5\;V/W$, $3.95{\times}10^{-7}\;W$ and $5.06{\times}10^5\;cm/W$ under emission energy of $13\;{\mu}W/cm^2$ respectively.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.12-14
• /
• 2009

초전도 DC 마그네트에 영구전류 (Persistent Current)를 흘리기 위해서는 초전도 접합(Superconducting Joint)이 필요하다. 저온 초전도 선재는 초전도 접합이 가능하며 고온 초전도체 중 BSCCO 선재로도 초전도 접합을 만들 수 있다. 그러나 최근 개발되어 향후의 초전도기기에 적용될 2세대 초전도 선재인 ReBCO CC(Coated Conductor)로는 아직 초전도 접합을 만들 수 없다. 본 연구에서는 광폭 선재의 중심을 가르고 양 종단부가 그대로 붙여진 형태의 선재를 이용하여 영구전류를 홀릴 수 있는 고온 초전도 마그네트를 제작하였다. 영구전류 초기 충전을 위하여 1.2 m 길이의 ReBCO 도체 종단부에 스테인리스 히터를 부착하여 영구전류 스위치를 구성하였다. 발생된 자기장의 시간적 균일성을 측정하기 위하여 34 시간동안 홀센서를 사용하여 대기압 액체질소 77.3 K에서 자기장을 측정하였다.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.10-15
• /
• 2003

$PbTiO_3$/P(VDF/TrFE) thin film for pyroelectric infrared sensor's sensing materials have been fabricated by spin coating technique. 65 wt% VDF and 35 wt% TrFE were for P(VDF/TrFE) powder. $PbTiO_3$ powder was used for a ceramic - polymer composites materials. Surface of composite thin film by ceramic fraction factor was observed by SEM. The $PbTiO_3$/P(VDF/TrFE) thin film capacitancy, dielectric constant and dielectric loss measured by impedence analyzer(HP4192A) and pyroelectric coefficient was measured by semiconductor parameter analyzer(HP4145B).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.129-136
• /
• 2016

A novel sensing system for standing and moving human body using PIR(pyroelectric infrared) sensor was development. The system consists of power supply, interface circuit of PIR sensor, small stepping motor, and digital control. The detecting principle for stop human body is detecting the human body when the stepping motor sticking the PIR sensor and the fresnel lens has rotated by 180 degree at six second and has stopped the motor for no detecting signal of human body. We developed control algorism for proposed the detection system. The experimentation shows that the detector system had detected length and angle were 6m and 30 degree against as standing and moving human body with $37^{\circ}C$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.488-495
• /
• 2012

The real-time indoor location technology using radio waves has been studied in a variety of environments. One of them, a ship which consists of steel structure has high reception rate but causes significant ranging error due to the reflection of radio waves. In order to reduce location measurement errors that occurs in such a environment, this paper, based on CSS of IEEE 802.15.4a, presents compensation algorithm for localization using modified bilateration and pyroelectric sensor in a ship. The proposed system reduces the number of fixed nodes by estimating the appropriate reception distance between mobile node and fixed node through the analysis of CSS characteristic in a narrow passage such as ship corridors. Also, in the corner section which the ranging errors are significantly fluctuated due to the reflection and diffraction of radio waves, we recognize the location by tracking the a moving section using modified bilateration technique and pyroelectric sensor. The experimental results show that the location accuracy and efficiency of the proposed algorithm are improved 86.2 % compared to general method.

• 전기의세계
• /
• v.53 no.12
• /
• pp.20-25
• /
• 2004