• 제목/요약/키워드: 초저상버스

검색결과 4건 처리시간 0.019초

전기버스용 초저상 액슬 일체형 휠모터 구동시스템 개발 (Development of the wheel motor drive system integrated into low-floor axle for the electric bus)

  • 조상준;윤영득
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2011년도 추계학술대회
    • /
    • pp.241-242
    • /
    • 2011
  • 교통 약자 승객의 편의성 증대, 도심의 매연 감소 및 온실가스 저감 등 대중 교통 선진화를 위해 친환경 초저상 전기버스의 개발이 필요하다. 초저상 전기버스는 초저상 액슬 일체형 휠모터 구동시스템을 탑재한 형태로 구현이 가능하며, 초저상 액슬 일체형 휠모터 구동시스템은 구동 모터를 액슬 허브에 일체화 시킴으로써 기존 구동시스템 대비 무게 및 사이즈가 대폭 줄어들고, 동력 전달 매커니즘을 획기적으로 개선하여 효율 향상 및 차량 연비 개선이 가능하다. 특히 바퀴 중심과 액슬 출력 중심에 단차를 둠으로써 차량의 전방 바닥 뿐만 아니라 후방바닥을 평평하게 유지할 수 있어 실내 공간이 획기적으로 개선되어 교통 약자를 포함한 승객의 편의성을 향상시킬 수 있다. 또한, 액슬 일체형 휠모터 구동시스템은 각 휠의 분산 구동이 가능하므로 동특성 및 구동제어성이 뛰어나고, ESP(Electronic Stability Program), VDC(Vehicle Dynamic Control) 등과 연계하여 통합적인 지능형 시스템을 구현할 수 있다. 액슬 일체형 휠모터 구동시스템은 휠모터와 감속기 및 휠모터제어기 등으로 구성되며, 본 논문에서는 초저상 액슬 일체형 구동시스템용 120kW급 휠모터 및 휠모터제어기의 개발 및 다이나모 환경에서 T-N 특성 및 최대 출력 시험, 효율 시험을 통해 전기버스 등 대형 차량(Heavy Duty Vehicle)에 적용 가능한 전기동력시스템의 성능을 확인하였다.

  • PDF

하이브리드 샌드위치 복합재 초저상버스 구조물의 파손 평가 연구 (A Study on Failure Evaluation of Korean Low Floor Bus Structures Made of Hybrid Sandwich Composite)

  • 이재열;신광복;이상진
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.50-61
    • /
    • 2007
  • The structural stiffness, strength and stability on the bodyshell and floor structures of the Korean Low Floor Bus composed of laminate, sandwich panels and metal reinforced frame were evaluated. The laminate composite panel and facesheet of sandwich panel were made of WR580/NF4000 glass fabric/epoxy laminate, while aluminum honeycomb or balsa was applied to the core materials of the sandwich panel. A finite element analysis was used to verify the basic design requirements of the bodyshell and the floor structure. The use of aluminum reinforced frame and honeycomb core was beneficial for weight saving and structural performance. The symmetry of the outer and inner facesheet thickness of sandwich panels did not affect the structural integrity. The structural strength of the panels was evaluated using Von-Mises criterion for metal structures and total laminate approach criterion for composite structures. All stress component of the bodyshell and floor structures were safely located below the failure stresses. The total laminate approach is recommended to predict the failure of hybrid sandwich composite structures at the stage of the basic design.

초저상 버스 차체 적용을 위한 샌드위치 패널들의 저속충격 특성 연구 (A Study on Low-Velocity Impact Characterization of Various Sandwich Panels for the Korean Low Floor Bus Application)

  • 이재열;이상진;신광복
    • 대한기계학회논문집A
    • /
    • 제31권4호
    • /
    • pp.506-516
    • /
    • 2007
  • In this paper, a study on low-velocity impact response of four different sandwich panels for the hybrid bodyshell and floor structure application of the Korean low floor bus vehicle was done. Square samples of 100mm sides were subjected low-velocity impact loading using an instrumented testing machine at six energy levels. Impact parameters like maximum force, time to maximum force, deflection at maximum force and absorbed energy were evaluated and compared for four different types of sandwich panels. The impact damage size and depth of the permanent indentation were measured by 3-Dimensional Scanner. Failure modes were studied by sectioning the specimens and observed under optical microscope. The impact test results show that sandwich panel with composite laminate facesheet could not observe damage mode of a permanent visible indentation after impact and has a good impact damage resistance in comparison with sandwich panel with metal aluminum facesheet.