• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2017

This study is for coordinates analysis(geocentric and rectangular coordinate) of Korean geodetic VLBI which has been operated by NGII (National Geographic Information Institute) in Republic of Korea since 2014. The purpose of this study is a fundamental research to determine the Korean geodetic datum. The VLBI data recorded from September 29th 2014 to July 31th 2017, total approximately a hundred of VLBI databases, is used to calculate daily positions and position rates. The VLBI coordinates are based on ITRF(2000,2005,2008,2014) with epochs of the first Korean VLBI observation date(September 29th 2014) and Korean Geodetic Datum(January 1st 2002). And as a results of VLBI observation, Korean VLBI coordinate movement velocity of 3.1cm/yr in the direction of $112.4^{\circ}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.126-131
• /
• 1990

Sixty two Job's Tear cultivars were largely classified into ten varietal groups and every varieties. except for Group V forming the Group by one variety. uniformly formed the Groups. From Group I to Group Ⅹ respectively contained three(5%), eighteen(29%), five(8%), thirteen(21%), one(2%), five(8%), seven(11%), four(7%), two(3%) and four(7%) varieties. Group II and Group IV showed considerably large variation whereas Group Ⅷ, IV and Ⅹ showed low variation and inferiority in vigorosity and yield components. Most of the varietal Group were not associated with their geographical origin. Days to flowering and plant height among the nine characters were the largest contributors to the D$^2$ in both inter- and inter groups.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.183-188
• /
• 2004

This study was conducted to investigate the effects on the growth and yield by the different seeding methods and cultivating root weight in Atractylodes macrocephata Koidz. Seeding distances were different such as 5${\times}$5 cm, 5${\times}$10 cm, 10${\times}$10 cm, 10${\times}$15 cm by the hand seeder and 15 cm seeding in drill. Emergence date, plant height were not significantly changed with seeding space, but the number of leaf, fresh weight of above-ground part and fresh weight of root were increased in the sparse seeding compared with the dense seeding. The highest fresh root yield was 1,012 kg/10 a at the 5${\times}$5 cm. Roots yield was increased in the sparse seeding compared with the dense seeding, but the highest number of roots above 16 g yield was observed at the 10${\times}$10 cm seeding distance. Emergence date was faster 1∼3 day root weight above 6 g than that root weight 5 g. The plant height, number of stem and fresh weight of above-ground part were more increased as the root weight was heavier. The growth of underground part were more increased as the root weight was heavier, yield was increased about 27％ to 112％ compared with root weight above 6 g than that 134.6 kg/10 a with root 5 g.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.133-138
• /
• 2010

This study was conducted to analysis a major cause of rice yield reduction in 4 research points, 1, 2, 3, and 5km, from coastline in the East Sea. There were great changes of temperature in each research point, though the average temperature a day was no difference between each research point. Each temperature in 1, 2, and 3km research points was 8, 7, and $4^{\circ}C$ lower than in 5km when cold salty wind was generated due to cold pool. As it was close in coastline, its soil was abundant sand components, little silt and clay soil components and lacking in cation exchange capacity(CEC). And plant height became a smaller, heading date was delayed for 3～4 days, and dry weight was reduced. Also, it was to be down percent of fertile grain. As cultivation site was close in seaside, its decline was larger because of reduction of panicle number per hill. It was "Samdeogbyeo" that was variety adapted in cold salty wind, having yield potential more than 90% in 2km.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2015

This study was conducted in three years (7-9 years after planting) to investigate vegetative growth, yield, fruit quality, and return bloom for optimum crop load based on different planting densities of adult 'Fuji'/M.9 apple trees. As plant materials, 'Fuji'/M.9 apple trees planted at $3.5{\times}1.5m$ (190 trees per 10 a), $3.5{\times}1.2m$ (238 trees per 10 a), and $3.2{\times}1.2m$ (260 trees per 10 a) spacing and trained as slender spindles were used. The crop load was assigned to five different object ranges as follows: 55-64, 65-74, 75-84, 85-94, and 95-104 fruit per tree. TCA increment, total shoot growth, return bloom, yield per tree, and yield efficiency tended to increase as planting density decreased, and fruit weight and soluble solid content tended to increase as the object range of crop load decreased. Fruit red color tended to increase as shoot growth decreased. For apple trees planted with 238 trees and 260 trees per 10a, biennial bearing occurred when the crop load was over 85-94 and 75-84 fruits, respectively. However, biennial bearing did not occur when the crop load was 95-104 fruits in apple trees planted with 190 trees per 10a. Accumulated yield tended to increase as planting density and crop load increased, but that of biennial bearing did not show such a difference. Based on our results, optimum crop load recommendations are to set 95-104 fruits per tree in 'Fuji'/M.9 mature apple trees planted at 190 trees per 10a, 75-84 fruits per tree at 238 trees per 10a, and 65-74 fruits per tree at 260 trees per 10a.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.233-240
• /
• 2017

This experiment was conducted to establish a cultivation system for sorghum in reclaimed soils. Pot experiments were used to test the effects on seedling establishment of sowing depth, soil water content, and soil salinity using seeds of Nampungchal-susu and Hwanggeumchal-susu in reclaimed soil. Field experiments were also conducted to examine differences in growth characteristics and yield production, by sowing time, and planting distance. The result of the pot experiment, examining seedling establishment at various sowing depths revealed that, it was the highest 76.7% when the seeds were sown at a depth of 3 cm. Seedling establishment did not differ with soil water content between 10~30 kpa and at 51~70 kpa. No effects of seed moisture absorption before sowing were observed. Seedling establishment showed no differences with soil salinity below $3.2\;dS\;m^{-1}$, but decreased with Salinity above $4.8\;dS\;m^{-1}$. In field experiments to assess the effects on seedling establishment ratio of sowing time, Nampungchal-susu was revealed to have a high seedling establishment ratio following sowing on June 15. Hwanggeumchal-susu did not exhibits effects of sowing time, on seedling establishment ratio but exhibited higher seedling establishment when in low soil salinity conditions than when sown in high soil salinity conditions. With respect to yield, the yield of the seeds sown on June 15 was higher by 13% for Nampungchal-susu and by 29% for the Hwanggeumchal-susu than that those sown on June 25. With respect to soil salinity, the yield at a soil salinity of $3.2dS\;m^{-1}$ was lower by 23% than that at $1.6dS\;m^{-1}$ or lower for Nampungchal-susu, and was lower by 30% Hwanggeumchal-susu. With respect to planting density, both breeds showed the highest yield at $60{\times}10cm$. These results suggest that a sowing time of June 15 and a seeding distance of $60{\times}10cm$ are appropriate for sorghum in reclaimed land.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.8-14
• /
• 2023

This study was conducted to develop a precision automatic irrigation system in a nursery by considering the problems and improvements of manual and the conventional automatic irrigation system. The amount of irrigated water between the conventional automatic irrigation system and manual irrigation was 28.7 ± 4.4 g and 14.2 ± 4.3 g, respectively, and the coefficient of variation was less than 30%. However, the coefficient of variation of the conventional automatic irrigation system of 15%, was higher than that of manual irrigation of 30%. The irrigation test using the developed uniform irrigation system attached with the nozzle of a spray angle 80° and most highest uniformity was at height 600 mm. And coefficient of variation of the irrigation uniformity at the center part was within 20%, but irrigation amount of the edge part was lower 50% and over compared to the center part. As a result of a tomato grafting seedling cultivation test using the developed uniform irrigation system, the average plant height of seedling at the edge part was 28 mm but plant height at the center part was higher as 72 mm. Therefore, it was necessary to apply additional irrigation device at the edge part. The irrigation uniformity of the edge concentrated irrigation system was investigated that the irrigation amount of the edge part was irrigated by more than 50% compared with the center part, and coefficient of variation of the irrigation amount at the center part was less than 30%. As a result of a cucumber grafting seedling cultivation test using the edge concentrated irrigation system, the plant height of seedlings in the edge and central part of cultivation bed were 24% and 26%, respectively, so irrigation uniformity was higher then the uniform irrigation system. In order to improve the uniformity of seedlings, it is necessary to adjust the height of boom according to the growth of the seedling by installing a distance sensor in the overhead watering and boom irrigation system.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.41-45
• /
• 2014

This study was conducted to investigate the effects of crown numbers on growth and yield of ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) 'Goha' cultivar. Strawberry seedlings were planted with $55{\times}30cm$ distance on April 29, and the randomized block experimental was designed by putting the crown numbers by 1, 3, 5 and crown-unremoved as the control. At the early growth stage, as the numbers of crown decreased, the size of leaf became larger and inflorescence diameter became thicker. Plant height became higher as the number of crown increased at the final harvesting time. Fresh weight of crown-unremoved plants was 118 g, showing 77.2 g higher than that of plants with one crown. Numbers of the developed inflorescence of plants with five crowns and crown-unremoved was 20.1, whereas 6.8 of plants with one crown, resulted in 13.3 more crowns. However, crown number did not significantly affect the fruit quality. As the crown number increased, the average fruit weight was lighter and the marketable fruit rate was shown to decrease significantly. The marketable yield of crown-unremoved plants was $17,372kg{\cdot}ha^{-1}$, showing 68% higher than plants with one crown. Therefore, crown management without thinning crowns was recommended and inflorescence thickness less than 3 mm should be removed for successful production of ever-bearing strawberry 'Goha' cultivar during summer season.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.337-344
• /
• 2006

KVN simulation, which is focused on evaluating the impacts of KVN to geodetic VLBI network, was performed. The KVN is under construction with three radio telescopes VLBI system for radio astronomy and space geodesy. To distinguish the impacts of KVN on global and local scale networks, we designed two different sizes of VLBI networks, namely, KVN-Asia and KVN-Pacific. While the former consisted of Far East Asia region VLBI stations, the latter consisted of pacific region VLBT stations. The primary purpose of our simulation is quantitative evaluation of KVN impacts before and after the participation of KVN in the previous two virtual networks. We selected two different sets of parameters to be estimated in the simulation as indices of evaluating estimation precision: station coordinates and EOPs. The station coordinates are evaluating index for KVN-Asia and the EOPs are another evaluating index for KVN-Pacific. From the simulation results of comparisons between evaluating indexes, 50% and 20% of maximum improvements for KVN-Asia and KVN-Pacific were anticipated respectively. We expect that the space geodetic use of KVN will be focused on the several promising research fields which are proposed through the simulation results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.295-302
• /
• 2011

The setting time which is the important element for the determination of slip-up speed of Slip-Form system is the hardening time of early-age concrete when the in place concrete has minimum compressive strength before the concrete appears out of Slip-Form system. But it is very difficult to predict the setting time because it depends on not only the composition ratio of concrete but also various conditions of construction fields. Thus, the technique to estimate accurately and continuously the hardening time of early-age in place concrete during operating Slip-Form system is necessary to guarantee the safety of Slip-Form system and the maintenance of the shape of concrete. Ultrasonic wave-based nondestructive testing methods have the advantages which are accurate and continuous in estimating concrete compressive strength. Of such methods, the method using surface wave which propagates along the surface of material is effective for thick member such as a pylon. Thus, in this paper a study on the determination of slip-up speed for Slip-Form system using surface wave velocity is performed. The relation between the slip-up speed of Slip-Form system and the setting time is formulated, and the surface wave velocity is estimated from continuous wavelet transform of the numerical results for surface wave propagation. Finally, the accuracy of this method according to the distance between the wave source and receivers and the relation between the estimated surface wave velocity and the elastic modulus are investigated.