• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.391-399
• /
• 2005

Laser-generated ultrasonic inspection system is a non-contact scanning inspection device with high spatial resolution and wide bandwidth. The amplitude of laser-generated ultrasound is varied according to the energy of pulse laser and the surface conditions of an object where the CW measuring laser beam is pointing. In this paper, we correct the generating errors by measuring the energy of pulse laser beam and correct the measuring errors by extracting the gain information of laser interferometer at each time. h dynamic stabilizer is developed to stably scan on the surface of an object for an laser-generated ultrasonic inspection system. The developed system generates ultrasound after adaptively finding the maximum gain time of an laser interferometer and processes the signal in real time after digitization with high speed. In this paper, we describe hardware configuration and control algorithm to build a stable laser-generated ultrasonic inspection system. Also, we confirmed through experiments that the proposed correction method for the generating errors and measuring errors is effective to improve the performance of a system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.331-340
• /
• 2004

Deployment of an advanced on-line monitoring of the component integrity offers a prospect of improved performance, enhanced safety, and reduced overall cost for nuclear power plants. Ultrasonic guided waves have been known as one of the promising techniques that could be utilized for on-line monitoring. The present work is aimed at developing a new method for on-line monitoring of the pipes during the operation period of nuclear power plants. For this purpose, the steam generator (S/G) tube was selected as an object of tile experiment. Dispersion corves and the incident angles corresponding to the specific modes were calculated for the S/G tube. The modes of guided waves were identified by the time-frequency diagrams obtained by the short time Fourier transform. It was experimentally confirmed that there was no mode conversion when the ultrasonic guided waves passed over the curved region of the S/G tube. An optimum mode of guided wave for the S/G tube was suggested and verified by the experiment.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.5 no.1
• /
• pp.50-59
• /
• 2012

In the domain of orthopaedic surgery, application of regional nerve block for surgery or pain control in upper and lower extremities has been increased. By performing regional block of popliteal (sciatic), femoral, proximal saphenous nerve and ankle block under guidance of ultrasound, not only the safety, but also success rate of the procedure has increased, and amount of local anesthetics could be used less, too. Since the perineural single injection or continuous catheterization of diluted local anesthetics was performed more precisely and easily by the guidance of ultrasound, postoperative pain could be controlled without complications of PCA such as nausea, vomiting, etc. We will discuss about this ultrasound guided regional nerve block.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.201-206
• /
• 2016

Social interest in breast cancer has increased. The most basic exams for diagnosis include breast X-ray and breast ultrasound. In particular, breast microcalcification requires histological diagnosis, and breast microcalcification biopsy is commonly performed. Therefore, this study aimed to analyze and assess X-ray guided biopsy (needle localized open biopsy) and ultrasound guided biopsy (sono guided core needle biopsy), which are basics in diagnosis of microcalcification. Targeting 241 cases in which magnification mammography was performed for patients who visited the hospital due to breast microcalcification, age distribution and the location of lesions were analyzed in X-ray guided biopsy and ultrasound guided biopsy. By classifying exams performed after magnification mammography, the frequencies of X-ray guided biopsy and ultrasound guided biopsy were analyzed, and malignant and benign results were confirmed. The results showed that 64 cases(26.6%) were X-ray guided biopsy, which was 5.4 times higher than 12 cases(4.9%) of ultrasound guided biopsy. Due to development of ultrasound equipments, stereotactic vacuum-assisted biopsy, etc. the methods of histological diagnosis of microcalcification have become diverse, but when considering characteristics and limitations of each exam, X-ray guided biopsy is thought to be most accurate and useful.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.252-252
• /
• 2022

최근 기존의 전통적인 부유사채집기를 활용한 유사량 측정방법의 대안으로 지속적인 유량측정을 목적으로 활용되고 있는 횡방향 초음파도플러유속계의 초음파산란도를 활용하여 부유사농도를 측정에 대한 연구가 수행되고 있다. 하지만, 하천에서 횡방향 초음파도플러유속계를 활용한 유사량 측정 연구는 현장에서 측정된 자료를 기반으로 분석이 수행되기 때문에 통제된 유사 조건에서의 유사의 농도 및 입도분포에 대한 사전 정보를 바탕으로 정밀한 분석의 어려움이 있다. 이에 본 연구에서는 안동하천실험센터 순환수로에서 균일한 입도를 가지고 있는 황토를 활용하여 주입량에 따른 초음파산란도의 변화와 동시에 측정된 LISST(laser in-situ scattering and transmissometry)의 부유사 농도와 입도 자료를 활용하여 유사공급에 따른 3Mhz의 단일 주파수를 사용하는 횡방향 초음파도플러유속계의 초음파산란도를 활용한 부유사농도 및 평균입경의 측정에 대한 연구를 수행하였다. 측정결과, 유사공급에 따라서 초음파산란도를 활용하여 부유사농도가 증가하는 경향을 나타내고 있었으며, 횡방향 초음파도플러유속계로부터 측정된 셀별 초음파산란도를 활용하여 부유사농도의 공간적인 분포의 분석이 가능함을 확인할 수 있었다. 그리고 유사감쇄계수를 활용하여 LISST로부터 측정된 평균입경과의 관계식을 개발하여 유사공급에 따른 평균입경의 변화를 측정할 수 있을 것으로 나타났다. 추후, 통제된 조건에서의 다양한 입도분포에 따른 실험을 통해 횡방향 초음파도플러유속계의 초음파산란도를 활용한 부유사농도 측정 정확도를 개선과 유사감쇄계수를 통해 평균입경을 측정하는데 활용이 될 것으로 판단된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.367-373
• /
• 2011

Guided waves inspection techniques that are different with inspection technique by bulk waves are widely used in pipe line evaluation due to advantages of long distance inspection. However, most of pipe lines at industrial fields are buried and/or coated. In this case, due to the attenuation effect from soil and/or coating material, there are a lot of difficulty on inspection by conventional ultrasonic technique. In this paper, guided waves propagating patterns are calculated with respect to excitation mode by Normal Mode Expansion(NME). Guided waves patterns based on excited by single transducer and guided wave focusing technique have employed to analyze focusing pattern on a pipe. A longitudinal mode and high order flexural modes are used with various number of transducers to determine sensitivity. Guided waves energy excited by multi transducer with focusing algorithm was successfully focused at a desired point.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.6 no.2
• /
• pp.81-93
• /
• 2013

This review was described to investigate the feasibility of using ultrasound as an image tool for interventions of lumbar spine. This article will first provide an overview of lumbosacral spine surface anatomy and sonoanatomy. A detailed understanding of anatomy is critical for interpretation of ultrasound and procedural performance at spine. Fluoroscopy is most commonly used in interventional spine procedures, but radiation exposure is the major concern when obtaining fluoroscopic images. Ultrasound is radiation-free, is easy to use, and can provide real-time images with high accuracy. Also this device can be used in virtually any clinical setting. Ultrasound guidance offers a reliable alternative to fluoroscopy or computed tomography for lumbar interventions and can be safely performed without radiation exposure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.287-293
• /
• 2005

Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of defects thinning simulating hidden corrosion in thin aluminum plates. The proposed approach uses EMAT(electro-magnetic acoustic transducer) for the noncontact generation and detection of guided waves. Interesting features in the dispersive behavior of selected guided modes are used for the detection of plate thinning. It is shown that mode cutoff measurements provide a qualitative detection of defects thinning. Measurement of the mode group velocity can be also used to quantify depth thinning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.95-102
• /
• 2005

There are many tube and pipeline in nuclear power plant under high temperature and high pressure. Erosion and corrosion defects were expected on these tube and pipe-line by environmental and mechanical factors. These erosion and corrosion defects ran be evaluated by ultrasonic technique. In these study, Scanning Laser Source(SLS) technique was applied to detect defect and construct image. This technique also makes detection possible on rough and curved surfaces such as tube and pipe-line by scanning. Conventional ultrasonic scanning technique requires immersion of specimen or water jet for transferring ultrasonic wave between transducer and specimen. However, this SLS technique does not need contacting and couplant to generate surface wave and to get flaw images. Therefore, this SLS technique has several advantages, for complicated production inspection, non-contact, remote from specimen, and high resolution. In this study, SLS images were obtained with various conditions of generation laser ultrasound and receiving in order to enhance detectability of flaws on the tube. Stress corrosion cracks were produced on tube and images of stress corrosion cracks were constructed by using SLS technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.206-212
• /
• 2000

The guided wave mode conversion phenomena were investigated for the NDE of a plate-like structure with thickness variation. The ratios of reflection and transmission (R/T) were measured via the self-calibrating procedure which allows us to obtain experimental guided wave data in a more reliable way regardless of the coupling uncertainty between transducer & specimen. The results on R/T could be used to determine the thickness reduction of the structure. It was shown that not only the incident modes but also the converted ones need to be considered in the self-calibrating guided wave inspection to extract a reasonable correlation between experimental data & the thickness variation. Through this study, the potential of guided wave inspection as a quantitative NDE technique was explored based on the combined concept of self-calibration & multi-mode conversion in guided wave scattering problems.