• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.251-257
• /
• 2015

In ultrasonic nonlinear parameter measurement using the fast Fourier transform(FFT) of tone-burst signals, the side lobe and leakage on spectrum because of finite time and non-periodicity of signals makes it difficult to measure the harmonic magnitudes accurately. The window function made it possible to resolve this problem. In this study, the effect of the Hanning and Turkey window functions on the experimental measurement of nonlinear parameters was analyzed. In addition, the effect of changes in tone burst signal number with changes in the window function on the experimental measurement was analyzed. The result for both window functions were similar and showed that they enabled reliable nonlinear parameter measurement. However, in order to restore original signal amplitude, the amplitude compensation coefficient should be considered for each window function. On a separate note, the larger number of tone bursts was advantageous for stable nonlinear parameter measurement, but this effect was more advantageous in the case of the Hanning window than the Tukey window.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.70-77
• /
• 2019

Breast ultrasound readings are very important to diagnose early breast cancer. In Ultrasonic inspection, it shows a significant difference in image quality depending on the ultrasonic equipment, and there is a large difference in diagnosis depending on the experience and skill of the inspector. Therefore, objective criteria are needed for accurate diagnosis and treatment. In this study, we analyzed texture characteristics by applying GLCM (Gray Level Co-occurrence Matrix) algorithm and extracted characteristic parameters and diagnosed breast cancer using neural network classifier. Breast ultrasound images were classified into normal, benign and malignant tumors and six texture parameters were extracted. Fourteen cases of normal, malignant and benign tumor diagnosed by mammography were studied by using the extracted six parameters and learning by multi - layer perceptron neural network back propagation learning method. As a result of classification using 51 normal images, 62 benign tumor images, and 74 malignant tumor images of the learned model, the classification rate was 95.2%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.145-152
• /
• 2010

This study evaluated the fatigue degradation in a SUS316L specimen using the nonlinear ultrasonic method. The nonlinearity of the ultrasonic wave was estimated by a relative nonlinear parameter defined as the ratio of the amplitudes for the fundamental wave to the second harmonic wave. In the experiment, a measurement system with contact transducers was constructed; reliable measurements were assured by keeping measurement conditions consistent and reducing extra harmonics generated in the measurement system. Two types of SUS316L specimen were used in experiments; a rotating bar fatigue specimen and a tensile fatigue specimen. The fatigue condition used was high cycle fatigue. The former specimen had a cylindrical shape and was used to observe the change in the nonlinear parameter after fatigue accumulation in a specimen. The latter was a plate-shaped specimen and was used to confirm the change in the nonlinear parameter at the position where the fatigue stress was concentrated. The measured nonlinear parameter showed a strong correlation to the damage level in both fatigue tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1133-1137
• /
• 2014

The ultrasonic nonlinear parameter ${\beta}$ is generally known as an effective parameter for evaluating material degradation. Thus far, most research has been conducted using a contact method. However, since measurement by this contact method is affected by the contact conditions between the transducer and the specimen, additional devices are required to maintain the contact conditions stable during the measurement. To avoid this inconvenience, this paper proposes a noncontact method. In this study, only the receiver was replaced with a noncontact receiver, and then, the ultrasonic nonlinear parameters measured by the newly developed noncontact receiver were compared with those measured by the contact receiver. Results obtained using both these receivers for heat-treated aluminum alloy specimens showed good agreement. From this result, we can confirm that the ultrasonic nonlinear parameter ${\beta}$ can be measured using the proposed noncontact ultrasonic method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6066-6071
• /
• 2013

This paper proposes a calibration method for a freehand 3-D ultrasound system in medical robotic research. The calibration block with six wires was designed to set the fixed target points. The positions of the ultrasound probe and calibration block were measured using an optical tracker. The relationship between the position of the ultrasound probe and the pixel coordinates in the images was derived using a calibration process. The scaling matrix was also calculated. The experimental results showed that the proposed method could find solutions using a simple least square method from one or multiple ultrasound images.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.111-113
• /
• 2007

본 논문에서는 FPGA를 사용하여 진행파형 초음파 모 터의 2상 입력 전원 전압의 주파수, 위상차, 진폭 및 2 상간의 전압차 조절이 가능하고, 8대의 초음파 모터를 동 시에 제어할 수 있는 8채널 USB통신 PC기반 초음파 모터 디지털 제어기를 제안한다. 제안한 제어기는 FPGA를 이용 한 디지털 논리에 의해 출력을 발생하기 때문에 PC로부 터 직접 제어 명령을 입력 받아 각각의 파라미터를 실시 간으로 조절할 수 있을 뿐만 아니라, 둘 이상의 파라미터 를 동시에 조절이 가능하다. 또한, PC와의 인터페이스는 USB통신 방식을 채택하여 제어 명령의 전달속도 향상 및 플러그 앤 플러그 방식을 통해 데스크 탑 컴퓨터는 물론 휴대용 컴퓨터나 PDA와 같은 다양한 플랫폼에서 사용할 수 있도록 설계하였다. 또한, 초음파 모터의 속도 및 위치를 계측하기 위해 사용된 로터리 엔코더 카운터 회로를 FPGA회로에 내장시켜 카운터를 위한 별도의 회로 구성이나 장비 구입의 필요성을 배제하였다. 따라서, 생산 단가 및 부피를 현저히 감소시켰다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.171-176
• /
• 1998

The objective of this study was to re-evaluate ultrasound attenuation as an indicator of bone properties. Ultrasound attenuation(BUA), were measured in the three orthogonal directions of trabecular bone cubes, Measurements of bone mineral density(BMD) were made using quantitative computed tomography and apparent density by weighing bone specimens and measuring their volume. Ultrasonic modulus was calculated from the standard equation with apparent density and ultrasound velocity. Ultrasound attenuation at a frequency of 0.5 MHz and BUA were correlated with BMD and ultrasonic modulus in the anterior/posterior, medial/lateral, and superior/inferior directions. Analysis of correlations demonstrated that attenuation at 0.5 MHz was superior to BUA in describing both BMD and elastic modulus of trabecular bone. This result may be used to improve current ultrasound diagnostic techniques for assessing bone status.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.142-147
• /
• 2020

This study investigates the effects of moisture content on diffuse ultrasound to be applied for the evaluation of micro-structural damage in concrete subjected to various environmental conditions. We monitored diffuse wave parameters for concrete samples in process of water saturation for 5 days. Dried samples were immersed in a water bath, and the change of moisture content in concrete were estimated by measuring the change of mass. For the diffuse wave analysis, a frequency range of 500 kHz, which represents a scattering regime of ultrasound in concrete, was selected. The test results reveal that the ultrasonic diffusivity slightly changed, and the ultrasonic dissipation significantly increased by approximately 120% in the process of water saturation. Therefore, the moisture content in concrete should be considered for the evaluation of micro-structural damage using diffuse wave techniques.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.473-479
• /
• 2021

The diagnostic criteria for diffuse thyroid disease are ambiguous and there are many errors due to the subjective diagnosis of experts. Also, studies on ultrasound imaging of thyroid nodules have been actively conducted, but studies on diffuse thyroid disease are insufficient. In this study, features were extracted by applying the GLCM algorithm to ultrasound images of normal and diffuse thyroid disease, and quantitative analysis was performed using the extracted feature values. Using the GLCM algorithm for thyroid ultrasound images of patients diagnosed at W hospital, 199 normal cases, 132 mild cases, and 99 moderate cases, a region of interest (50×50 pixel) was set for a total of 430 images, and Autocorrelation, Sum of squares, sum average, sum variance, cluster prominence, and energy were analyzed using six parameters. As a result, in autocorrelation, sum of squares, sum average, and sum variance four parameters, Normal, Mild, and Moderate were distinguished with a high recognition rate of over 90%. This study is valuable as a criterion for classifying the severity of diffuse thyroid disease in ultrasound images using the GLCM algorithm. By applying these parameters, it is expected that errors due to visual reading can be reduced in the diagnosis of thyroid disease and can be utilized as a secondary means of diagnosing diffuse thyroid disease.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.170-176
• /
• 2002

Nonlinear acoustic effect has been considered as an effective tool for the evaluation of material degradation. In this paper, the applicability of nonlinear acoustic effect to the evaluation of degraded 2.25Cr-1Mo steel is investigated. Firstly, artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Secondly, ultrasonic nonlinear parameter was quantitatively measured by bi-spectrum and power spectrum. Nonlinear acoustic parameter from bi-spectrum was found to be clearly sensitive to the aging time.