• Journal of Veterinary Clinics
• /
• v.14 no.1
• /
• pp.70-74
• /
• 1997

말과 소의 정상 안구내의 구조와 크기를 알아보기 위하여 10마리의 말과 14두의 Holstein 안구를 적출하여 생리식염수내에서 초음파상으로 안구내의 구조를 확인하였으며 각막의 두께, 전방의 깊이, 수정체의 두께, 초자체의 깊이 및 안구축을 측정하였다. 초음파로 측정한 안구를 $-30{\circ}C$ 로 동결한 후 Diamond cutter로 절단하여 caliper로 측정하여 Student-t test로 처리하여 수치를 비교하였다. 초음파상에서 말은 암컷$(35.99{\pm}1.97)과 숫컷(35.94{\pm} 3.36)$, 좌측(36.26)과 우측$(35.67{\pm}2.65)$눈의 크기가 비슷하였으나, 소에서도 좌측$(29.06{\pm} 3.36)과 우측(28.53{\pm} 3.36)$눈의 크기가 비슷하여 통계학적 유의차는 없었다. 본 연구에서는 7.5MHz 초음파기의 B-Mode 방식을 이용하여 말과 소의 안구의 구조를 확인하고 측정하였는데 임상적으로 매우 유용하여 수의안과학에서 적용할수 있는 가치있는 진단법이다.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.179-185
• /
• 2001

혈관에 발생하는 동맥 경화증은 그 발생 시기와 진행 정도를 예측하기 힘들어 초기 단계의 진단 및 치료가 어렵다. 이러한 이유로 혈관 질병의 진단은 많은 연구자들의 관심 대상이 되어왔고, 현재까지도 그 진단 장치 및 방법에 관한 연구가 활발히 진행되고 있다. 혈관 벽의 두께 측정은 혈관 질병을 진단할 수 있는 대표적인 지표이다. 그러므로 본 연구는 혈관 벽에서 수신되는 초음파 RF(Radio Frequency) 신호를 wavelet 변환하여 두께를 측정할 수 있는 방법을 제안한다. 시뮬레이션 결과를 토대로 두께가 각각 0.53mm, 1.2mm인 고분자 물질을 가지고 두께측정 실험을 행하였다. 기존의 방법인 주파수 스펙트럼법과 제안한 방법인 wavelet 변환법에 의하여 측정된 평균 두께는 0.53mm인 경우 각각 0.670$\pm$0.168mm(79.10%), 0.448$\pm$0.084mm(84.53%)이고, 1.2mm인 경우 각각 0.962$\pm$0.072mm(80.17%), 1.149$\pm$0.066mm(95.15%)이다. In-vitro 실험을 행하기 위하여 한천, gelatin, SiC 결정을 가지고 두께가 0.85mm인 혈관 유사 시편을 제작하였고, 이 시편으로부터 데이터를 획득하여 이를 제안한 방법으로 두께를 측정하였다. 그 결과 제안한 방법으로 측정된 평균 두께는 0.8008$\pm$0.0154mm(94.22%)이다. 결론적으로 wavelet 변환을 통해서 혈관 벽의 두께를 정밀하게 측정할 수 있는 가능성이 있음을 알 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.413-416
• /
• 2010

본 논문에서는 요부 영상에서 근육을 추출하는 방법을 제안한다. 제안된 방법은 초음파 영상에서 왜곡이 존재하지 않는 영역을 측정 할 근육 영역을 설정한 후, 초기 초음파 영상에서 불필요한 잡음을 제거하고 Ends-in Search Stretching 기법을 적용하여 근육 영역의 명암 대비를 강조한다. 그리고 형태학적 특징을 이용하여 등뼈 영역과 피하지방을 분리한 후, 4 방향 윤곽선 추적 알고리즘을 적용하여 피하지방의 하단 부분을 추출한다. 또한 최대 및 최소 명암도를 조정하여 얻어진 등뼈의 후보 영역에서 형태학적 특징을 이용하여 잡음을 제거하고 최종적으로 등뼈 영역을 추출한다. 추출된 등뼈 영역에 대해 피하지방층과 등뼈 사이를 근육의 두께로 측정한다. 본 연구에서 제안된 방법을 요부의 초음파 영상에 적용하여 근육 영역을 추출한 결과, 제안된 방법이 초음파 영상에서 근육 영역들의 두께를 측정하는데 기존의 근육 측정 방법보다 효과적인 것을 확인 할 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.89-96
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.562-569
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.161-168
• /
• 2009

The carotid intima-media thickness (IMT) is an early structural marker of the atherosclerotic process and is the only non-invasive test that is currently recommended by the American Heart Association for evaluation of the risk. However, use of this parameter has a limitation because it assumes uniform thickness throughout the blood vessel, whereas atherosclerosis is a focal phenomenon that is confined to intima. In fact, plaque can be found along the atherosclerotic blood vessels even though its value is unknown. The aim of this study is to analyze the carotid plaque and IMT in the stroke patients. We investigated the patients with ischemic stroke, who were admitted to the department of neurology at the Stroke Special Hospital from January to March 2008. After the carotid IMT and plaque were assessed by B-mode ultrasonography, IMT and carotid plaque to risk variables (age, sex) were analyzed. The distribution of CCA IMT was significantly different in terms of age (p = 0.004). Likewise, the distribution of carotid plaque was also significantly different in terms of age (p = 0.006). Carotid plaque was 69 and 92% in normal and abnormal CCA IMTs respectively. The results showed that the CCA IMT was closely associated with carotid plaque.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.4 no.1
• /
• pp.7-14
• /
• 2011

Purpose: The purpose of this study was to analyze the correlation between the medial joint space on weight bearing simple X-ray and the ultrasonographic articular cartilage thickness. Materials and Methods: The articular cartilage thickness of 91 osteoarthritic knees of 73 patients were measured with weight bearing simple X-ray and ultrasonography between June 2010 and September 2010. Male were 13 and female were 60. Right knees were 35, left knees were 20 and bilateral involvements were 18. Medial joint spaces on X-ray were measured in full extension view and $45^{\circ}$ PA(Rosenberg) view. Femoral cartilage thicknesses at and those at the point between the middle 1/3 and posterior 1/3 area were measured by ultrasonography, that were scanned coronally at $30^{\circ}$ flexion and $130^{\circ}$ flexion respectively. The results were analyzed statistically by Pearson correlation test and Bland-Altman plot test. Results: Medial joint spaces measured in full extension view and femoral articular cartilage thicknesses at the point between the anterior 1/3 and middle 1/3 area measured with sonography were statistically correlated and medial joint spaces measured in $45^{\circ}$ PA view and those at the point between the middle 1/3 and posterior 1/3 area measured with sonography were also correlated (P<0.05, $SD{\pm}2$). Conclusion: The measurement of articular cartilage thicknesses by the ultrasonography was easy even in the patient who are unable to take weight bearing view and was thought to be a useful diagnostic and follow up method to examine the degenerative change in addition to simple radiographic examination in the knee osteoarthritis.

• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.249-258
• /
• 2008

Purpose : Abdominal obesity with visceral fat accumulation have been known to be intimately associated with the development of metabolic syndrome. Therefore, it is important to estimate the precise amount of visceral fat. Ultrasonography has been reported that it is a simple and noninvasive method for visceral fat evaluation. Purpose of this study is to evaluate the association of ultrasonographic visceral fat thickness, anthropometric indexes, and risk factor of metabolic syndrome, and to investigate the cut-off value of abdominal visceral fat thickness leading to increased risk of metabolic syndrome. Materials and methods : The subject included 200 men and 200 women who visited D healthcare center in Daejeon from January to April 2008. The subcutaneous fat thickness and visceral fat thickness were measured by ultrasonograph. As anthropometric index, we measured body mass index, waist circumference and waist/height ratio. As for the risk factor of metabolic syndrome, we measured blood pressure, high density lipoprotein cholesterol, triglyceride and fasting serum glucose. Results : VFT was significantly correlated with waist circumference, (r=0.683/M, r=0.604/F), waist to height ratio (r=0.633/M, r=0.593/F) and BMI (r=0.621/M, r=0.534/F) in both men and women. In addition it was significantly correlated with Systolic blood pressure (r=0.229/M, r=0.232/F), Diastolic blood pressure ((r=0.285/M, r=0.254/F), high density cholesterol (r=-0.254/M, r=-0.254/F), Triglyceride (r=0.475/M, r=0.411/F), and Fasting blood sugar (r=0.158/M, r=0.234/F) in both men and women. The cut-off value of visceral fat thickness leading to the increased risk of metabolic syndrome was 4.58cm (sensitivity89.2%, specificity 71.2%) in men and 3.50cm (sensitivity61.2% specificity 80.8%) in women respectively. The odds ratio of the risk of metabolic syndrome was dramatically increased with the abdominal visceral fat thickness level over 6cm in men and 5cm in women. Conclusion : The visceral fat thickness using ultrasonography was significantly correlated with anthropometric indexes and risk factors of metabolic syndrome in both men and women. The cut-off value of visceral fat thickness leading to the increased risk of metabolic syndrome was 4.58cm in men and 3.50cm in women.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.207-208
• /
• 2009

B-모드 초음파를 이용한 경동맥 내중막 두께(IMT intima-media thickness) 측정은 관상동맥 질환이나 허혈성 뇌질환 위험도의 독립적인 인자로 매우 중요하다. 본 연구에서는 NTSC(national television system committee) 방식으로 경동씩 초음파 동영상신호를 획득하여 프레임으로 나누어 각각의 IMT를 측정하였다. 각각의 측정값을 시간축으로 재구성하여 시간도메인에서 IMT 의 시변동성을 분석하였다. IMT 시변동성 분석을 통하여 상대적으로 부정맥피험자가 정상피험자에 비해 IMT 평균값이 작아 위험도가 낮다고 평가 될 수 있지만 시변동성 분석으로 IMT 평균값이 작아도 혈관의 기능적 특징이 부족하여 위험도가 높다는 것을 알 수 있었다. 경동맥의 형태적 특징과 기능적 특징을 반영하는 이 분석방법은 경동맥 내중막 두께측정의 신뢰성을 향상시키며 관련질환의 위험도와 중증도를 세분화 할 수 있는 새로운 방법이 될 수 있을 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.26-30
• /
• 1997

In this paper, the thickness measurement method of adhesive layers of multilayers using power cepstrum signal processing technique has been proposed. The peak values for reflected signal from each layer have been separated by power cepstrum technique. Therefore, thickness of adhesive layers have been measured by the intervals of peak signal. In the experiment, the adhesive layers of 0.5mm-0.75mm thickness using epoxy(2-Ton and Plastic Steel Putty(A)) between the aluminum and the brass were formed. The adhesive layer thickness which is calculated with data of reflected signal by ultrasonic pulse-echo method was within error 1.34% of the measured values.