• 한국추진공학회지
• /
• 제2권1호
• /
• pp.1-12
• /
• 1998

본 연구에서는 기존에 수행되었던 초음속 이젝터에 대한 실험적 연구 및 수치계산 결과에 대한 타당성을 검증하고, 이젝터 유동을 보다 명확히 해석하기 위하여 이젝터 목을 가지는 초음속 이젝터 유동 장에 대하여 k-$\varepsilon$ 난류모델을 적용하였다. 수치계산은 3~200까지의 매우 넓은 범위의 이젝터 작동 압력비에 대하여 수행되었으며, 수치계산 결과들은 이젝터 내부의 유동특성들을 조사하는데 이용되었다. 계산결과, 이젝터 압력비가 6 이상인 경우 이젝터 내부에서 발생하는 유동장은 이젝터 압력비에 크게 의존하지 않는다는 것을 알았다. 본 연구에서 사용된 단순 형태의 초음속 이젝터에 대하여, 2차 정체실의 압력은 이젝터 압력비가 6인 경우에 약 7k㎩로 최소로 되었다. 그러나 이젝터 압력비가 6이상으로 증가하는 경우 2차 정체실의 압력은 증가하는 것으로 나타났다. 이와 같은 2차 정체실의 압력증가는 1차 노즐로부터 방출되는 부족팽창 제트유동이 이젝터 벽면에 충돌함으로써 발생하는 재순환 유동으로 설명할 수 있었다.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.712-717
• /
• 2013

The gas management system for a vertical launching system must be safely managed within a ship. The plenum and uptake are capable of containing and surviving a full-burning restrained firing without loss of gas management integrity. To secure the safety, the pressure characteristics with a supersonic under-expanded jet on a gas management system are numerically investigated using computational fluid dynamics. The results of present analysis and the preliminary design of the gas management system are described in this paper.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.225-228
• /
• 2002

Supersonic jet impingement on a flat plate has been investigated to show the flow physics for different jet heights and to demonstrate the adequacy of the characteristics-based flux-difference Wavier-Stokes code Current study also compares the steady-state solutions obtained with variable CFL number for different grid spacing with the time-accurate unsteady solutions using the inner iterations, displaying a good agreement between the two sets of numerical solutions. The unsteady nature of wall fluctuations due to bouncing of the plate shock is also uncovered for high pressure ratios. The methodology is then applied to a complex vertical launcher system where the jet plume hits the bottom wail, deflects into the plenum and eventually exits through the vertical uptake. Flow structures within vertical launcher system are captured and solutions are partially verified against the flight test data. Present jet impingement study thus shows the usefulness of CFD in designing a complex structure and predicting flow behavior within such a system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.229-232
• /
• 2002

For the purpose of Thermal Protection Material design problem, a numerical analysis of axisymmetric high temperature supersonic impinging jet flows of exhaust gas from combustor on curved surfaces has been accomplished. A modifed CSCM Upwind Navier-Stokes method which is able to cure the carbuncle Phenomena has been developed to study strong shock wave structure and thermodynamic wall properties such as pressure and heat transfer rate on various curved surfaces. The results show that the maximum heat transfer rate which is the most important parameter affecting thermo-chemical surface ablation on the plate did not occur at the center of jet impingement, but rather on a circle slightly away from the center of impingement and the shear stress distribution alone the wall is similar to the wall heat transfer late distribution.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.23-28
• /
• 2002

TNumerical simulations of the supersonic impinging jet flows are carried out using the 3D Navier-Stokes code. This paper is focuses on the unsteady flow features associated with stagnation bubbles and other oscillatory behavior. The 3D code was validated by reproducing the results of Lamont's experiments. Computation is carried out for the cases in which the unsteadiness of the plate shock has been observed experimentally. The computational results confirm the oscillatory feature in several kHz. Unsteady calculation with algebraic turbulence model is also performed. It is found that the laminar and turbulent results have some discrepancy in the transient period. However, both of them reveal the oscillatory behavior with similar frequency.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.14-19
• /
• 2010

A computational study was carried out to analyze the characteristics of supersonic (Mach 2.0) coaxial/off-axis jet's impingements on a slanted kerf surface in laser machining. The effects of various parameters such as gas pressure, distance between nozzle exit and kerf edge surface, and application of off-axis nozzles on the impingement phenomena of the assist-gas on kerf surface were observed. The present study showed that simply increasing the assist-gas pressure for coaxial supersonic nozzle was not effective to alleviate the strength of flow separation on kerf surface. It also presented the optimized operating condition of the coaxial nozzle to have the highest skin friction values over kerf surface.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제10회 학술강연회논문집
• /
• pp.15-15
• /
• 1998

The problem of the impingement of a sonic or a supersonic jet on a flat surface has not only wide applications but has also interesting and very complex flow phenomena. The main applications of this impinging jet include prediction of solid surface erosion, design of launcher systems, stage separation of multi-stage rocket system, V/STOL operations, thermal spray system, and manufacturing technologies of materials. Much have been learned about the supersonic impinging jet flow field but many fundamental questions have not been answered satisfactorily. The problem encompasses many facets of fluid dynamics which, in combination, present the compressibility effect and the viscous-inviscid interaction, coupled with flow separation and reattachment. What is more, there are many flow parameters that have on the impinging jet flow field, for example, Mach number, Reynolds number, pressure ratio, distance between the nozzle exit and flat plate, jet shock structure, nozzle diameter and etc. Thus the existing data on the supersonic impinging jet flow present considerable disagreement in which quantitative comparison between one result and another is often impossible.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.124-131
• /
• 2003

When a secondary gaseous flow is injected vertically into a supersonic flow through circular nozzle, a complicated structure of flow field is produced around the injection area. The interaction between the two streams produces a strong bow shock wane on the upstream side of the side-jet. The results show that bow shock wave and turbulent boundary layer interaction induces the boundary layer separation in front of the side-jet. This study is to analyze the structure of flow fields and distribution of surface pressure on the flat plate according to total pressure ratio using a supersonic cold-flow system and also to study the control force of affected side-jet. The nozzle of main flow was designed to have Mach 2.88 at the exit. The injector has a sonic nozzle with 4mm diameter at the exit of the side-jet. In experiments, The oil flow visualization using a silicone oil and ink was conducted in order to analyze the structure of flow fields around the side-jet. The flow fields are visualized using the schlieren method. In this study, a computational fluid dynamic solution is also compared with experimental results.

• 한국전산유체공학회지
• /
• 제6권3호
• /
• pp.32-40
• /
• 2001

Viscous solutions of supersonic jet impinging on a flat plate normal to the flow are simulated using three-dimensional Navier-Stokes solver. The jet impinging flow structure exhibits such complex nature as shock shell, plate shock and Mach disk depending on the flow parameters. Among others, the dominant parameters are the ratio of the nozzle exit pressure to the ambient pressure and the distance between the nozzle exit plane and the impinging plane. In the present study, the nozzle contour and the pressure ratio are held fixed, while the jet impinging distance is varied to illuminate the characteristics of the jet plume with the distance. As the plate is placed close to the nozzle at 3D high, the computed wall pressure at or near the jet center oscillates with large amplitude with respect to the mean value. Here D is the nozzle exit diameter. The amplitude of wall pressure fluctuations subsides as the distance increases, but the maximum mean pressure level at the plate is achieved when the distance is about 4D high. The frequency of the wall pressure is estimated at 6.0 kHz, 9.3 kHz, and 10.0 kHz as the impinging distance varies from 3D, 4D, to 6D, respectively.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.488-494
• /
• 2014

유도탄 발사 시 화염은 발사 장치 및 인접 구조물에 심각한 손상을 야기할 수 있다. 본 연구는 유도탄 발사 시 함정과 유도탄의 초기 운동에 의해 유도탄의 화염이 인접 구조물에 미치는 영향을 분석하기 위하여 수행하였다. 이를 위해 함정과 유도탄의 초기 운동에 영향을 미치는 각 인자들을 확률분포로 정의하고 Monte Carlo 해석 기법을 이용하여 통계적으로 발생할 수 있는 유도탄 이탈 영역을 분석하였다. 그 후 유도탄의 화염이 인접 구조물에 가장 큰 영향을 미치는 유도탄 이탈 궤적에 대해 CFD기법을 이용하여 유동-운동해석을 수행하였다. 이와 같은 방법으로 유도탄 발사 시 함정과 유도탄의 초기 운동에 의해 유도탄 화염이 인접 구조물에 미치는 영향을 분석하였다.