• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.129-140
• /
• 2004

KAO(Korea Astronomy Observatory) GPS group has developed an iRTK system as a near-real time positioning system using GPS carrier phase data. We focused on improving the accuracy of positioning through the updated capability of data processing of KAO's iRTK system using low-cost L1 carrier phase receiver. The accuracy of a positioning was demonstrated by Extended Kalman filter. Experiments were accomplished using from 30m to 20km baselines. Within 10km, the positioning accuracy was improved by approximately 50-70% to the previous study using one minute observable data. However, it took two minutes to obtain 1m level positioning accuracy at 20km point. We expect that the developed iRTK system can be applied to the various fields of GPS in near-real time positioning.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.2
• /
• pp.109-116
• /
• 1993

Underwater acoustic positioning systems have been extensively used not only in surface position fixing but also in underwater position fixing. Recently, these systems have been applied in the field of installation and underwater inspection of offshore platforms etc. But in these systems are included the fixing errors as results of a signal with additive noise and irregular motion of vessel by ocean waves. To improve the accuracy of the position fixing a Kalman filter is applied to the supershort baseline (SSBL) acoustic positioning system with beacon mode in noise conditions. The position data obtained by the Kalman filter is compared with raw position data and it is confirmed in the simulation that the former is more accurate than the latter. And an indicator monitoring the filtering effect is described while ship's moving.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.204-209
• /
• 2004

It is well known fact that acoustic positioning systems are absolutely needed for various underwater operations. According to the distances between their sensors they are classified into three parts: long baseline(LBL), short baseline(SBL), and ultra-short baseline(USBL). Among them the USBL system is widely used because of its simplicity, although it is the most inaccurate. Recently, in order to increase the positioning accuracy, various USBL systems using broadband signal such as MFSK(Multiple Frequency Shift Keying) are produced. However, their positioning accuracy is still limited by background noise and reflected waves. Therefore, there is difficulty in applying the USBL system using MFSK signal in a shallow water with noisy conditions. In order to examine the effect of the noise and wave reflections this paper analyze position errors for various conditions using numerical simulations. The simulation results say that tile SNR must be greater than 20dB and errors in the vertical direction are slightly increased by wave reflections by upper and lower boundaries.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.46-51
• /
• 2010

This paper describes the implementation of a precise underwater navigation solution using a multi-sensor fusion technique based on USBL, DVL, and IMU measurements. To implement this precise underwater navigation solution, three strategies are chosen. The first involves heading alignment angle identification to enhance the performance of a standalone dead-reckoning algorithm. In the second, the absolute position is found quickly to prevent the accumulation of integration error. The third one is the introduction of an effective outlier rejection algorithm. The performance of the developed algorithm was verified with experimental data acquired by the deep-sea ROV, Hemire, in the East-sea during a survey of a methane gas seepage area at a 1,500 m depth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1202-1208
• /
• 2008

This paper represents the multiple sensor fusion algorithm for the deep-sea unmanned underwater vehicles (UUV), composed of a remotely operated vehicle (ROV) 'Hemire' and a depressor 'Henuvy'. The performance of underwater positioning system usually highly depend on that of acoustic sensors such as ultra short base line(USBL), long base line(LBL) and altimeter. A practical sensor fusion algorithm is proposed in the sense of a moving window concept. The performance of the proposed algorithm can be observed by applying the algorithm to the Hemire sea trial data which was measured at the East Sea.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.335-339
• /
• 2005

The underwater positioning system is important in interpreting data that are acquired from towing vehicles such as the deep-sea camera (DSC) system. Currently, several acoustic positioning systems such as long baseline (LBL), short baseline (SBL), and ultra short baseline (USBL), are used for underwater positioning. The accurate position of DSC, however, could not be determined in a R/V Onnuri unequipped with any of these underwater positioning systems. As an alternative, the DSC position was estimated based on the topography of towing track and cable length in the cruises before 1999. The great uncertainties, however, were found in the areas of flat bottom topography. In the 2003 and 2004 cruises these uncertainties were reduced by calculating the position of DSC with the cable length and seafloor depth below the vessel. The Japanese cruises for Mn-nodule used a similar estimation method for the DSC positioning system with a CTD sensor. Although the latter can provide better information for the position of DSC, the USBL underwater positioning system is strongly recommended for establishing better positioning of DSC and other towing devices.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.249-256
• /
• 2004

KRISO/KORDI is currently developing a deep-sea unmanned underwater vehicle (UUV) system which is composed of a launcher, an ROV, and an AUV. Two USBL acoustic positioning systems will be used for UUV's navigation. One is for the deep sea positioning of all three vehicles and the other is for AUV's guidance to the docking device on the launcher. In order to increase the position accuracy MFSK(Multiple Frequency Shift Keying) broadband signal will be used. As the first step to the implementation of a USBL system, this paper studies USBL positioning algorithm using MFSK signals. Firstly, the characteristics of MFSK signal is described with various MFSK parameters: number of frequencies, frequency step, center frequency, and pulse length. Time and phase delays between two received signals are estimated by using cross-correlation and cross-spectrum methods. Finally an USBL positioning algorithm is derived by converting the delays to difference of distances and applying trigonometry. The simulation results show that the position accuracy is improved highly when both cross-correlation and cross-spectrum of MFSK signals are used simultaneously.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.33-42
• /
• 2010

This research propose a practical guidance system considering ocean currents in real sea operation. Optimality of generated path is not an issue in this paper. Way-points from start point to possible goal positions are selected by experienced human supervisors considering major ocean current axis. This paper also describes the implementation of a precise underwater navigation solution using multi-sensor fusion technique based on USBL, GPS, DVL and AHRS measurements in detail. To implement the precise, accurate and frequent underwater navigation solution, three strategies are chosen. The first one is the heading alignment angle identification to enhance the performance of standalone dead-reckoning algorithm. The second one is that absolute position is fused timely to prevent accumulation of integration error, where the absolute position can be selected between USBL and GPS considering sensor status. The third one is introduction of effective outlier rejection algorithm. The performance of the developed algorithm is verified with experimental data of mine disposal vehicle and deep-sea ROV.