• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.747-750
• /
• 2005

본 연구에서는 가정 내에서 사용할 수 있도록 PC 를 이용한 영상 감시시스템을 설계, 구현하였다. 구현 시스템은 PC 에 접속하여 영상장비인 4 대까지의 PC 카메라를 통해 영상을 입력 받도록 설계하였으며, 입력 받은 영상에 영상처리기법을 적용하여 영상 개선이 가능하도록 하였는데, 즉 내/외부 상황을 영상으로 모니터링 할 수 있으며, 확대 기능을 추가하여 목표물의 인식을 높였다. 또한 Motion Detection 감지를 통하여 영상 데이터를 확보할 뿐만 아니라 이를 별도의 저장매체에 저장할 수 있게 하였다. 초고속 인터넷을 통한 인증과 외부에서 가정 내 상황 확인, 그리고 영상 저장이 가능한 감시 시스템을 구축하였으며, 이는 앞으로 현재 이슈가 되고 있는 홈 네트워크 시스템에서 활용될 수가 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.11
• /
• pp.943-950
• /
• 2008

A novel nondestructive testing (NDT) system, which is able to detect a crack with high speed and high spatial resolution, is urgently required for inspecting small cracks on express train wheels. This paper proposes a high speed scan type magnetic camera, which uses the multiple amplifying circuits and the crack indicating pulse output system. The linearly integrated Hall sensors are arrayed in parallel, and the Hall voltages from each sensor in the scanning direction are obtained and amplified. High-speed NDT can be achieved by using the exclusive analog-digital converter and micro-processor because the ${\partial}\;V_H/\;{\partial}$ x value, which provides the most important crack information, can be obtained by buffering and calculating. The effectiveness of the novel method was verified by examine using cracks on the wheel specimen model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.229-229
• /
• 2011

대기압 플라즈마 제트의 플라즈마 전파 현상을 조사하였다. 바늘침과 유리관으로 구성된 플라즈마 발생장치에 Ar을 주입하여 교류 고전압을 인가하면, 바늘침 전극부에 발생된 플라즈마가 길이방향에 따라 유리관 밖으로 전파된다. ICCD 초고속 카메라로 촬영한 결과, 고압부에 발생한 플라즈마 총알처럼 전파되는 것을 관측 되였다. 전파속도는 ~104 m/s이다. 이는 기체의 유속 ~10m/s 보다 훨씬 큰 값이다. 또한 광 프로브를 이용하여 광신호를 측정하였다. 광 신호가 고압 측부터 유리관 길이방향으로 순차적으로 전파되는 것이 관측 되었다. 전파 속도 ~104m/s으로 ICCD로 측정한 플라즈마 전파 속도와 일치한다.

• Electronics and Telecommunications Trends
• /
• v.31 no.1
• /
• pp.45-57
• /
• 2016

스마트폰을 포함한 고성능 모바일 기기들이 급속하게 증가하고, 통신사업자의 네트워크를 경유하지 않더라도 주변 기기 간 직접(Point-to-Point: P2P) 통신을 지원하는 다양한 방식의 통신기능이 스마트폰, 카메라 등 다양한 기기에 탑재됨에 따라 근접통신 기반의 다양한 신규 서비스들이 출현될 것으로 예상된다. 또한, 주변의 IoT 기기들과도 직접통신을 통해 정보를 교환하는 등 동영상, 음악 등의 큰 용량의 미디어를 통한 생활정보 획득이 일상화되고 있다. 모바일 사용자들이 미디어 정보를 네트워크 기반의 정보 소통이 아닌, 모바일/IoT 기기 간 직접 정보를 전달함으로써 네트워크의 부하를 경감하고, 사용자의 정보전달이 근접거리에서 보다 안전하게 소통되어 편리한 ICT 일상생활로 변화할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.611-614
• /
• 2008

Urea-SCR system has been known so far as one of effective after treatments for the reduction of NOx. In order to achieve better performance in SCR system, optimal geometric conditions for a urea injection system should be achieved. This research focused to visualize spray characteristics of urea injected SCR system in a heavy duty diesel engine. The experiment was conducted by varying injection pressures and flow rates of urea. The flow visualization was made by photographing techniques of CCD camera.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.1100-1103
• /
• 2007

보안관제시스템이 사이버 공격 현황을 보다 한눈에 알 수 있도록 시각적이고 입체적으로 바뀌고 있다. 네트워크 이상트래픽과 보안이벤트를 단순 텍스트나 표, 그래프를 넘어 3차원 영상 화면에서 직관적으로 분석하고 공격 상황을 볼 수 있는 기술이 보안관제시스템에 속속 결합되고 있어 주목된다. 본 연구는 기존 보안시스템 화상의 저장방법, 화상의 감시, 녹화된 화상의 검색 시 불안정성, 운영방법, 설치 방법 등을 혁신적으로 보완한 NETWORK CAMERA 은 RTOS, 카메라, 영상압축기, LAN제어기 등을 하나로 통합한 Embedded System으로 구성되어 운영자뿐만 아니라 누구든지 손쉽게 운영할 수 있도록 초점을 맞추어 인터넷 웹 환경에서 제공토록 개발되어 운영의 효율성을 높인 차세대 보안시스템을 구축하고자 합니다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1093-1098
• /
• 2013

A single-crystal sapphire is used as a transparent bulletproof window material; however, few studies have investigated the dynamic behavior and fracture properties under high-speed impact. High-speed and high-resolution sequential images are required to study the interaction of the bullet with the brittle ceramic materials. In this study, a device is developed to capture the sequence of high-speed impact/penetration phenomena. This system consists of a speed measurement device, a microprocessor-based camera controller, and multiple CCD cameras. By using a linear array sensor, the speed-measuring device can measure a small (diameter: up to 1 2 mm) and fast (speed: up to Mach 3) bullet. Once a bullet is launched, it passes through the speed measurement device where its time and speed is recorded, and then, the camera controller computes the exact time of arrival to the target during flight. Then, it sends the trigger signal to the cameras and flashes with a specific delay to capture the impact images sequentially. It is almost impossible to capture high-speed images without the estimation of the time of arrival. We were able to capture high-speed images using the new system with precise accuracy.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.9-16
• /
• 2016

An experimental study was performed to investigate the combustion characteristics of the liquid hydrocarbon fuel atomized by an ultrasonic oscillator. Configuration of the flame was caught by the high-speed camera, and images were analyzed in detail through a post-processing. In addition, the fuel consumption was measured using the balance during the combustion reaction. As a result, the consumption of atomized fuel increased with the increasing flow-rate of carrier-gas, but any correlation between the air/fuel ratio and carrier-gas flow-rate was not found. The variation of flame area was dependent on the fuel consumption and input power of the ultrasonic oscillator. FFT (Fast Fourier Transform) analyses using the flame area were conducted in order to discuss flame flickering.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.381-387
• /
• 2017

Dehydrogenation from the hydrolysis of a sodium borohydride ($NaBH_4$) solution has been of interest owing to its high theoretical hydrogen storage capacity (10.8 wt.％) and potentially safe operation. An experimental study has been performed on the catalytic reaction rate and pressure drop of a $NaBH_4$ solution over both a single microchannel with a hydraulic diameter of $300{\mu}m$ and a staggered array of micro pin fins in the microchannel with hydraulic diameter of $50{\mu}m$. The catalytic reaction rates and pressure drops were obtained under Reynolds numbers from 1 to 60 and solution concentrations from 5 to 20 wt.％. Moreover, reacting flows were visualized using a high-speed camera with a macro zoom lens. As a result, both the amount of hydrogenation and pressure drop are 2.45 times and 1.5 times larger in a pin fin microchannel array than in a single microchannel, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.489-494
• /
• 2013

This study aims to understand the mode characteristics of a droplet under a periodic forced vibration. To predict the resonance frequency of a droplet, theoretical and experimental approaches were employed. A high-speed camera was used to capture the various deformation characteristics of a droplet-mode shape, detachment, separated secondary droplet, and skewed deformation. The comparison between the theoretical and the experimental approaches shows a ~10% discrepancy in the prediction of the resonance frequency, which appears to be caused by the effect of contact line friction, nonlinear wall adhesion, and experimental uncertainty. Owing to contact-line pinning and smaller amplitude, the droplet shape becomes symmetric and the size of each lobe at the resonance frequency exceeds that at the neighbor, which is out of resonance.