• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.219-222
• /
• 2002

There are screw, reciprocating type turbo compressor by structure in an air compressor which is essential equipment on the industrial spot. Recently, the application range of a turbo compressor tend to be wide gradually. And this type of compressor needs high speed rotation of impeller in structure so high ratio gearbox and conventional induction motor driving required. This mechanical system have results of increased moment of inertia and mechanical friction loss. Recent studies of modern turbo compressor have been applied to developing super high speed BLDC motor and driver which remove gearbox that make its size small and mechanical friction loss minimum. To accomodate this tendency, we tried to develope a super high speed motor drive system for 150Hp, 70,000rpm direct drive Turbo compressor using DSP(Digital Signal Processor) and SVPWM(Space Vector Modulation PWM) technique. The results of this specific application show that super high speed driver and controller could be implemented well with digital electronics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.74-76
• /
• 2004

This paper deals with the analytical method to calculate the high temperature demagnetization characteristics of a high-speed machine with diametrically magnetized permanent magnet rotor. The equivalent magnetic circuit model is used to analyze the magnet operating point on high temperature condition. Agreements have been obtained between the results of the analytical model and finite-element analysis on prototype high-speed motors.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.50-52
• /
• 2008

This paper deals with design and characteristics analysis of 600HP class high_speed Permanent synchronous motor. The field equations due to magnet and stator windings are established in terms of vector potential and 2-d polar coordinate system. Back-emf and torque are then derived. The results compared with finite element method and show in good conformity with those obtained from finite element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.731-732
• /
• 2008

This paper deals with design and characteristics analysis of 7.5-kW, 60,000-rpm class permanent magnet synchronous motor for turbo compressor. In order to determine the design parameters of rotor, torque per rotor volume method is applied. And, to analyze the magnetic field distribution and estimate the electrical parameters such as back EMF constant, inductance and torque constant, electromagnetic transfer relations theorem is employed. We compare the characteristics analysis results of model designed by proposed method with those by nonlinear FEA. As a result of this, the design have been validated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.26-29
• /
• 2001

In this paper, a brief overview of problems related to the electromagnetic, mechanical design criteria is reported. Also, we described the results about the comparisons between BLDC motor and induction motor for Turbo Compressor considering motor cost, efficiency and reliability. As a result, we select an induction motor for 12.5RT Turbo compressor for the application of small building's all-conditioning system. Finally, a prototype induction motor was manufactured and tested under compressor set. The test results were successfully met the mechanical, thermal and electromagnetic point of view.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권6호
• /
• pp.278-286
• /
• 2005

Recently, high-speed centrifugal turbo-compressors have been under intensive research and development. Since, compared to conventional compressors, high-speed centrifugal compressors hive numerous qualities such as simple structure, light weight small size, and high efficiency, etc. In cope with such industrial demands, a high-speed brushless DC motor for a 50-kW, 70-krpm turbo-compressor was developed based on a 2-D analytical method, of which design was verified using the FE analysis. A prototype machine was also fabricated and tested to confirm the analytical design. Preliminarily obtained experimental data using the prototype mac]line shows the validity of the analytical approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.105-107
• /
• 2005

A high-speed brushless DC motor for a 50-kW, 70-krpm turbo-compressor was developed based on a 2-D analytical method, of which design was verified using the FE analysis. A prototype machine was also fabricated and tested to confirm the analytical design. Preliminarily obtained experimental data using the prototype machine shows the validity of the analytical approach.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.39-41
• /
• 2005

In this paper, a study on the controller for high speed PMSM (Permanent Magnet Synchro-nous Motor) is described. PMSM can be driven over 50,000 rpm because it has no brush and commutator structure. It also has less EMI noise and easy cooling structure compare to the other motors. The controller was designed to have a capability to drive 20kw, 42,000rpm high speed motor system. A senseless vector control method was studied based on d-q conversion theory to have a high driving efficiency. The control board was designed using TMS320C33 and the performance was verified by experimental results on driving the inverter and motor system.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.