• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.581-589
• /
• 1998

In order to correct a maxillofacial-skeletal disharmony successfully and achieve a favorable facial profile, orthodontic treatment must begin at pubertal growth spurt. Therefore predicting the pubertal growth pattern and evaluating the growth potential is very important. For an orthodontist, estimating skeletal maturity in relation to one's personal growth spurt is essential and it must be considered into the treatment. The objective of this study was to find out whether there was a difference in menacheal age among different malocclusion groups and to evaluate the skeletal maturity at menarche. The subjects were 64 Class I malocclusion patients, 51 Class II patients and 38 Class III patients. Skeletal maturity was estimated from handwrist radiographs of these patients. Handwrist radiographs were taken between 3 months before and after the menarche. The results were as follows. 1. The mean chronologic age of menarche was $12.50{\pm}1.01$ years. 2. For the Class I malocclusion group the mean age of menarche was $12.36{\pm}1.04$ years, for Class II $12.81{\pm}1.03$ years and for Class III $12.32{\pm}0.82$ years. According to these results Class II malocclusion patients started mensturation later than Class I and Class III malocclusion patients. 3. No difference was found considering the skeletal maturity at menarche among the malocclusion groups. 4. The skeletal maturity index at menarche was SMI 7 for $45.10\%$, SMI 8 for $27.25\%$, SMI 9 for $10.46\%$, SMI 6 for $7.84\%$, SMI 10 for $7.84\%$ and SMI 5 for $1.31\%$ patients. 5. Statistically there was a significant correlation between skeletal maturity estimated by handwrist radiographs and menacheal age(p<0.05, r=0.25430).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.11-12
• /
• 2010

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.28.2-28.2
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.454-461
• /
• 2007

The next-generation computer is the ultra-lightweight mobile computer that communicates with peripheral handhold devices and provides dynamically the services appropriate to user. To provide the dynamic services on the ultra-lightweight mobile computer, security problem for user or computer system information should be solved and security mechanism is necessary for the ultra-lightweight mobile computing environment that has battery limit and low performance. In this paper, the security mechanism on the component based middleware for the ultra-lightweight mobile computer was implemented using RC-5 cipher algorithm and SHA-1 authentication algorithm. The security components are dynamically loaded and executed into the component based middleware on the ultra-lightweight mobile computer.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.61-69
• /
• 2024

With increasing interest in aviation leisure sports, the demand for ultralight aircraft has increased, highlighting the necessity for robust structural design of the aircraft. In response, this study conducted static structural analysis and free-fall analysis of fuselage frame of ultralight aircraft. Robust design and crashworthiness under operational load conditions and vertical impact scenarios were evaluated by assessing maximum stress and safety factors. Analyses were performed using finite element method-based software ANSYS Workbench. Results including stress distribution and strain were analyzed to verify the safety of the designed fuselage frame. Additionally, this study predicted excessive deformation and failure locations of the fuselage frame during vertical drop impacts.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.186-194
• /
• 2000

The purpose of this study is to investigate the difference in cutting characteristics of cermet, carbide and coated carbide tools in the similar application range via turning test of various conditions. The cermet and carbide tools in the range of ISO P10 grade were developed using optimum compositions with a view to obtaining a high toughness and hardness by PM process. First mechanical properties were characterized on these tools. Experimental results of wear behaviour and resistance to fracturing were presented and discussed in the turning of gray cast iron and alloy steels by cermet, carbide and coated carbide tools. The coated carbide tool shows similar cutting performance compared to the cermet, while the cermet has better combination of wear resistance and toughness of high speed (V=500m/min) cutting in comparison with carbide and coated carbide tools, and also shows a potentiality for cast iron cutting. Fe adhesive behaviour on the tools and surface roughness of workpieces were explained by chemical affinity between tools and workpieces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.64-64
• /
• 2004

최근 복합재료, 신소재 등 다양한 방법을 통해 빔(beam), 바(bar), 패널(panel) 등 초경량 구조재료가 개발되고 있다. 이중 금속 내부구조재를 가진 접합판재(Inner Structured and Bonded panel, ISB panel)은 3차원 형상의 내부구조재가 강성 및 강도를 증가시키는 반면, 부피의 대부분이 비어있어 비강도 및 비강성을 크게 개선시킨다 일반적으로 다양한 트러스 형태의 금속 내부구조물은 허니컴 형상의 내부구조와 유사한 정도로 기계적 특성이 우수하다.(중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.48-56
• /
• 2021

Tungsten carbide (WC) circular saws have been widely used to cut plywood. Recently, expensive polycrystalline diamond (PCD) were adopted to extend the tool life of circular saws. This study developed a PCD-WC combination circular saw and compared its performance with that of existing WC and PCD saws. Flank wear of WC saw blades and edge chipping of rectangular PCD was observed during the experiments. The PCD-WC saw replaced half of the chamfered teeth with PCD and applied tough WC for all rectangular teeth. In the experiments, edge chipping was not observed in rectangular WC teeth and the flank wear of chamfered teeth was decreased compared with that of conventional circular saws.

• Electronics and Telecommunications Trends
• /
• v.36 no.2
• /
• pp.12-21
• /
• 2021

Intelligent radar sensors are applied in many industries, such as the automobile, aerospace, and defense industries (for security and surveillance), and for traffic monitoring and management as well as environmental and weather monitoring. Furthermore, they are used in smart cities, homes, and buildings, wherein intelligent motion sensing is required in daily life. It is mentioned that it is being used. In addition, ETRI introduces a phased array-based intelligent radar for drone detection and a human name detection radar technology based on which humans can be detected in case of a disaster.

• Conservation Science in Museum
• /
• v.17
• /
• pp.101-116
• /
• 2016

Ceramic cultural artifacts restored with gypsum-based materials are prone to decay over time due to gypsum's natural absorption and release of atmospheric moisture, often leading to distortion and peeling of painted layers. This study proposes a new restoration material which utilizes extra hard stone, significantly superior in strength to regular gypsum. In order to enhance its physical properties and make it suitable for restoration of ceramics, extra hard stone is mixed with metakaolin. This mixture far surpasses regular gypsum in compressive strength(119MPa vs. 26MPa) while also maintaining a much lower wear rate(0.88% vs. 2.53%). Furthermore, the water absorption rate(2.9%) of the mixed material is over five times lower than that of regular gypsum(17.2%). When examined using a SEM(Scanning Electron Microscope), this mixture also proved superior to extra hard stone in terms of hardened density. The addition of metakaolin increases the mixture's strength and water resistance over that of extra hard stone and also improves its surface density, making it ideal for the restoration of ceramics. It has already been used to repair ceramic objects in the Museum's collection: Clay basin(sinan 18892), Buncheong ware bottle with incised peony design(jubsu 2034), Buncheong ware bowl with chrysanthemum(jubsu 1730). Results thus far have shown the mixture to be easy to inject and layer as well as harden into an even surface, which allows for smooth application of paint for color matching.