• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1881-1882
• /
• 2006

표준형 원자력발전소에서는 원자로 내의 핵연료 봉으로부터 발생하는 열에너지를 열교환기인 증기발생기로 전달하는 원자로냉각재 계통이 있다. 핵연료 봉을 적절한 냉각 상태로 유지하기 위하여 원자로냉각재의 온도와 압력뿐만 아니라 체적을 제어하고 있다. 원자로냉각재 체적은 용량이 큰 반면에 제어하는 밸브의 크기는 작아서 제어 응답이 길어서 현장에서 경험적으로 튜닝하는 것은 매우 어렵다. 본 논문에서는 체적제어루프의 수학적인 모델링을 통하여 오프라인으로 최적 제어 파라미터를 찾고, 실제 적용한 결과를 보여준다. 제어루프 모델링을 위하여 일반화 프로세서 모델 식으로부터 실제 운전 데이터로 모델 파라미터를 결정하는 경험적 방법을 사용하였다. 이로부터 구한 제어 파라미터를 실제 적용한 결과, 적절한 제어 응답을 얻었으며 모델링 과정이 적절하였음을 확인하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.73-73
• /
• 1996

• Composites Research
• /
• v.17 no.5
• /
• pp.78-84
• /
• 2004

In this paper, a study of thermal response of two types of functionally graded materials (FCM) plates composed of $\textrm{Al}_2\textrm{O}_3$ and Ti-6Al-4V is presented. The material properties of the functionally graded plates are assumed to vary continuously through the thickness of the plate according to a power law distribution of the volume fraction of the constituents. It is supposed that the top and bottom surfaces of the plate are heated and kept as constant thermal boundary conditions. The fundamental equations for rectangular plates of FGM are obtained using Hamilton's variational principles. The solution is obtained in terms of Navier Solution. The influence of volume fraction and temperature is studied on the static deflection and natural frequency of FCM plate.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.382-391
• /
• 2002

This study is devoted to the problems of thermal and shrinkage stresses in order to avoid cracking at early ages. The early-age damage induced by volume change has great influence on the long-term structural performance of the concrete structures such as its durability and serviceability To solve this complex problem, the computer programs for analysis of thermal and shrinkage stresses were developed. In these procedures, numerous material models are needed and the realistic numerical models have been developed and validated by comparison with relevant experimental results in order to solve practical problems. A framework has been established for formulation of material models and analysis with 3-D finite element method. After the analysis of the temperature, moisture and degree of hydration field in hardening concrete structure, the stress development is determined by incremental structural formulation derived from the principle of virtual work. In this study, the stress development is related to thermal and shrinkage deformation, and resulting stress relaxation due to the effect of early-age creep. From the experimental and numerical results it is found that the early-age creep p)ays important role in evaluating the accurate stress state. The developed analysis program can be efficiently utilized as a useful tool to evaluate the thermal and shrinkage stresses and to find measures for avoiding detrimental cracking of concrete structures at early ages.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1848-1850
• /
• 2004

변압기에 사용되는 절연유의 열화정도를 변압기의 운전정지 없이 실시간으로 측정할 수 있는 전기용량을 이용한 센서를 개발하였다. 개발된 전기용량형 센서는 3-전극형의 구조와 변압기에 센서의 외부상자가 접지 될 때 2중의 정전차폐가 되도록 하여 외부로부터의 잡음에 영향을 받지 않도록 하였다. 또한 변압기에서 절연유의 온도변화에 따른 유전율 변화를 보상하기위하여 기준용 센서와 측정용 센서를 한개의 변압기에 장착함으로 온도보상이 되도록 하였다. 제작된 센서는 변압기에서 절연유의 사용기간에 따른 유전율의 변화를 정확히 측정하였으며, 절연유의 체적저항의 변화도 감지 할 수가 있다. 따라서 센서에서 출력되는 신호를 phase sensitive detector를 사용하여 유전율의 변화로 혹은 체적저항의 변화로도 나타내 보일 수가 있다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.9-15
• /
• 2001

The total pressure and partial pressure of small cavity for flat panel display have been successfully measured by using an ultra-high vacuum chamber with mass spectrometer. The total pressure in the panel was in the range of $10^{-6}$ Torr and the major partial pressure affecting increase in total pressure were those of Ar, $CH_4$and He. The baking temperature during evacuation process was very important for high-vacuum package, the total pressure and partial pressure of $CH_4$ were decreased as the increase of baking temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.94-101
• /
• 1994

실험 데이터는 급확대비 3:1 팽창의 시험관에서의 실험결과를 나타내고 있으며, 실험에 이용된 동작유체로써는 공기가 사용되었다. 입구관에서 레이놀즈수는 60,000으로부터 120,000까지 변하게 하였고, 스월강도는 0으로부터 16까지 변화되게 하였다. 균일한 열 플럭스 경계조건이 사용되었는데, 그 결과 관벽온도 및 체적온도는 24$^{\circ}C$로부터 71$^{\circ}C$까지에 걸쳐 나타났다. 플롯상에 국소 Nusselt수는 최대 열전달점에서 정점을 이루는 모습을 보여 주고 있다. 스월강도가 0으로부터 최대값으로 증가 되었을때, 최고 Nusselt수의 위치는 시험관에서 4로부터 1스텝 하이트로 변경되는 것이 조사되었다. 이러한 최대 Nusselt수의 상류부 이동은 완전 발달된 유동에서의 값보다 2.2배에서 8.8배나 많은 그의 크기를 증가시킨다고 할 수 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.373-374
• /
• 2009

Three autogenous expansion model of MgO concrete are investigated in order to access their suitability in stress analysis which consider temperature and volume change due to hydration of cement and temperature dependent expansion of MgO.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.207-212
• /
• 1992

To analyze the freezing phenomena of foodstuffs, the numerical freezing model with 3 steps was established. When water and 2% agar gel were used as samples, Neumann's solution was well matched with experimental results by the numerical model. However, in the case of 20% gelatin gel and pork meat, Weiner's solution was better than Neumann's solution. This numerical freezing model was proved to be good model to describe the freezing phenomena with phase change in the point of versatility and precision.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.91-96
• /
• 2016

In this study, effects of demolding temperature (DT) on the formability and optical properties were evaluated in order to optimize thermal nanoimprint lithography for anti-reflective film. Characterization on optical property showed that optical performance was gradually enhanced as the DT increased up to $70^{\circ}C$ while the transmittance and the reflectance was degraded as the DT increased further to $100^{\circ}C$. In addition, similar behavior was observed from formability analysis. It was contributed to the formation of free volume and viscose flow. Therefore, it was concluded that the formability and optical property are highly influenced by the formation of free volume and viscous flow of polymer depending on the DT.