• Journal of Korean Society of Transportation
• /
• v.36 no.3
• /
• pp.203-215
• /
• 2018

This study suggests a method to construct large scale dynamic O/D reflecting the characteristic that the passengers' travel patterns change according to the land use patterns of the destination. There are limitations in the existing research about dynamic O/D estimation method, such as the difficulty of collecting data, which can be applied only to a small area, or limiting to a specific transportation network such as highway networks or public transportation networks. In this paper, we propose a method to estimate dynamic O/D without limitation of analysis area based on transportation resources that can be easily collected and used according to the big data era. Clustering analysis was used to calculate the departure time trip distribution ratio based on arrival time and departure time trip distribution function was estimated by each cluster. As a result of the comparison test with the survey data, the estimated distribution function was statistically significant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.569-575
• /
• 2010

The occupancy based O/D is essential for measuring efficiency of various transportation policies like HOV/HOT lane, ramp metering, and public parking station. There has been many studies on occupancy survey methodology and O/D estimation using TCS (Toll Collection System) data separately. The occupancy O/D estimation methodology using TCS data has not been attempted thus far. An overall process from data collection stage to the occupancy O/D estimation stage has been suggested. Field survey was performed at the northbound Seoul toll station of Gyeongbu Expressway by each 2 hours of AM peak, PM non-peak, PM peak, midnight periods on a day. The process of matching the TCS data and field survey data classified by tollbooth ID, car type/mode, and arrival time was also performed. One typical output of the results showed that the ratio of single occupancy vehicles bounding for Seoul during the AM peak amounted to 60%. With the key output of this study and the specific O/D estimation methodology suggested, the whole centroid-to-centroid occupancy O/D of the country could be available, and then various applications in which the occupancy information is required could be possible.

• Journal of Urban Science
• /
• v.10 no.1
• /
• pp.49-60
• /
• 2021

The purpose of this study is to analysis the impact on the inside of the new city when an incidents occurs on the Songdo International City connecting road, which has a limited access. The analysis data used KTDB's O/D and network data of the Seoul metropolitan area. In addition, the scenario composition applied a method of reducing the number of lanes on the road according to the situation of incidents, targeting bridges advancing from Songdo International City to the outside in the morning peak hours. The analysis method analyzed the traffic volume, total travel time, total travel kilometer, and route change in the new city based on the results of the traffic allocation model. As a result of the analysis, the range of influence was shown to two types. First, of the seven bridges, Aam 3, Aam 2, and Aam 1 were analyzed to have an impact only in some areas of the northwestern part of the new city. On the other hand, the remaining bridges were analyzed to affect the new city as a whole. The analysis results of this study are expected to be used as basic data to establish the scope of internal road network management when similar cases occur in the future.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.19-31
• /
• 2007

When estimating the benefits from an investment project in the transportation sector, errors caused by many factors may exist. This study focuses on user equilibrium traffic assignment methods and stopping criteria. According to previous studies, when using a user equilibrium assignment model, the benefits of travel time savings can be effected by the relative gap value. As the stopping criteria decreases, the time needed for traffic assignment increases, so that lowering the criteria cannot be the best solution. Therefore, an effort is necessary to reduce this change rate and thus improve reliability. This paper considers three methods: reducing the links subject to benefit calculation, extracting sub-area O/D tables and networks, and applying the mean value of successive traffic assignment results. The results of the analysis show that the method using the mean value of five results is more proper than the other methods. Using the sub-area analysis method, if the study area is small the benefits of a project might be over- or under-estimated. This paper used a nationwide O/D table and network at peak time as a case study. The resulting patterns can differ according to basic data to be used in analysis. So further analysis using the data from metropolitan areas are needed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.99-100
• /
• 2004

AMBIDEXTER-NEC의 천이노심은 $^{Nat}Th$과 $^{Nat}U$의 주입만으로 전 출력의 Break-even 노심에 도달하기위한 중간 단계이다. 선행연구에서 수행한 전 출력노심인 평형노심의 핵종수밀도에 도달하기 위해서 평형노심에서의 기저물질, 잠재핵분열성물질, 핵분열물질의 수밀도를 각 SEU-기반, Pu-기반, ADS-기반에서 그대로 유지하여 초기노심을 구성하였다. 또 각 시나리오에 대해 최대첨두출력과 원자로의 안전성을 고려해 Excess Reactivity를 5mk 내에서 초기노심을 결정하였다. 각 노심은 주 핵분열성물질 $^{235}U$, $^{239}Pu$ 및 $^{233}U$의 핵반응단면적 특성에 따라 평균 전환율이 각각 0.95, 0.83 및 1 .21 로서 핵연료물질의 적절한 선택만으로도 전환로, 연소로 및 증식로로 설계할 수 있음을 보여준다. 이러한 $Th/^{233}U$, U/Pu 핵연료주기를 사용하는 AMBIDEXTER-NEC 용융염핵연료 원자로의 초기노심에서 시작한 천이노심은 평형노심에장전할 충분한 $^{233}U$ 양을 확보해야 하므로 천이노심의 목표는 평형노심 $^{233}U$의 요구량에 최소한의 기간에 가장 적은 외부주입을 통해 도달하는 것이다. 천이노심에서 임계가 유지되는 AMBIDEXTER-NEC 원자로시스템의 3군 핵종변환 코드인 HELIOS-SQUID-AMBIBURN 체제를 개발하였고 그림 1.에 나타내었다. 이 알고리즘은 각 초기노심 중원소의 미시단면적, 중원소를 제외한 원소들의 거시단면적, 임계도를 만족하는 중성자속 및 외부주입율을 계산하여 SQUID 및 AMBIBURN 입력자료를 제공한다. 또한 일정시간 중원소의 핵종농도, 외부주입율과 중성자속이 일정하다는 가정 하 에 반복수행 하고 SEU-기반과 Pu-기반의 경우에는 각각 핵변환을 거쳐 재순환되는 $^{233}U$ 및 $^{239}Pu$의 양을 바로 주입하는 최대재순환 경우와 평형노심 요구 장전량에 이를 때까지 시설 내 저장하는 최소재순환 경우로 상황을 모사하였다. 그림 2 는 각 시나리오별 초기노심에서부터 200FPD까지 단위 용융염 체적당 $^{233}U$의 수밀도 시간변화를 나타낸 것이다. 그림을 보면 50일 이후부터는 수밀도의 변화가 일정한 기울기를 보이고 있고 재처리공정에서 $^{233}Pa$를 분리하는 최소재순환의 경우에는 최대재순환보다 2-3%정도에 지나지않아 그림에서 나타내지않았다. SEU-기반 및 Pu-기반에서 $^{233}U$의 증가율이 각각 2.54E+13, 2.81E+13 #/cc/d 로 Pu 기반이 조금 더 큰 증가율을 나타내고 있지만 평형노심 농도 1.04E+20 #/cc/d 에 도달하기 위해서는 두 경우 모두 매우 긴 시간이 걸릴 것을 예상할 수 있다. 요컨대 250MWth AMBIDEXTER-NEC가 평형노심을 이루기 위해 필요로 하는 $^{233}U$을 생산하는데 제안한 SEU-기반, Pu-기반 시나리오는 천이노심주기기간이 전형적인 원자로 수명 3-40년 보다 매우 큰 것으로 나타났다. 따라서 장전될 $^{233}U$의 확보를 위한 최적옵션은 초기노심부터 ADS와 같은 외부생산시설로부터 전량을 공급 받아 운전하는 것이라 판단된다.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.99-110
• /
• 1999

With a growing awareness, transportation is the maior source of urban air pollution. Planners and policy-makers are strongly urged to care the impacts of transportation management strategies on environment. Since transport-related air Pollution can be regarded as negative externalities of transport, it is indispensable to evaluate chanties in air quality which seems to occur when proposed transport measures are implemented. In addition, transport measures should be integrated in a set of combined Paradigm regarding transport and environment. Based on the integrated Paradigm between transportation demand management(TDM) and environmental planning, the main focus is given to apply environment cost internalizing measures to the short-term congestion management Program(SCMP) in Seoul, that has been developed in 1998 by Seoul Development Institute. Three modules are analyzed: without and/or with ￦500, ￦1000 emission plus gas tax, respectively. From the empirical applications on Seoul city, one of the most exemplary findings in SCMP program is that, emission plus gas tax can be a very useful measure to reduce vehicular emissions by targeting major Pollutants differently, rather than by dealing with pollutants collectively. Further research that provides (1)showing the spatial variation of pollution levels along the intersections, (2)more developing combined Paradigm between transport, land use, and environment, (3)using environmental road capacity rather than Physical-aspects of road capacity, and (4)continuing R&D on air quality constrained TDM, can contribute significantly to applications of the real and efficient environment-constrained transportation planning.