• Journal of the Korean institute of surface engineering
• /
• v.51 no.6
• /
• pp.337-343
• /
• 2018

The present study investigated the effect of heat treatment process on the surface wettability of an Al-Si-Mg alloy. After solution-treated at $525^{\circ}C$ and aged at $160^{\circ}C$, the alloy showed high hardness due to the formation of precipitates. In addition, surface wettability was improved in such a way that the contact angle of distilled water droplet on the flat surface decreased to $37.6{\sim}42.1^{\circ}$ after the heat treatment. The surface energy predicted by Owens-Wendt equation also confirmed the increase of surface energy after the heat-treatment. However, when the surface roughness increased, the positive effect of the heat treatment on wettability diminished due to the geometrical factors of the rough surface.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2018

Preliminary study was perfomed to develop a biocompatible filter material using radiation energy. Electrosppined PLLA nano sheets were surface-modificated with hydrophilic groups(acrylic group) by using radiation. The physico-chemical and morphological characteristics of modified PLLA sheets were measured by ATR, SEM, contact angle, and hydrophilic (acryl group) introduction rate (TBO). As a result, there was no morphological(fiber structure) structure change due to radiation, and it was confirmed that an acrylic group was successfully introduced onto PLLA fiber sheet by radiation.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.349-353
• /
• 2018

Metronidazole (MD), which is used as an antibiotic, is largely used as an oral and skin application agent, and has inhibiting effect on the production of the fungus causing malodor. However, the maximum drug inclusion concentration is 0.75% of skin ointment in commercially available. In this study, hydrogels containing high concentration of metronidazole were prepared by using radiation crosslinking technique based on biocompatible polymers, and release characteristics and antimicrobial properties were evaluated. This study was preliminary carried out to investigate whether it could be used effectively as antibacterial dressing materials.

• Annual Conference on Human and Language Technology
• /
• 2019.10a
• /
• pp.185-189
• /
• 2019

관계추출기의 학습을 위해서는 많은 학습 데이터가 필요한데, 사람이 모으게 되면 많은 비용이 필요하여 원격 지도 학습을 이용한 데이터 수집이 많은 연구에서 사용되고 있다. 원격 지도 학습은 지식베이스를 기반으로 학습 데이터를 자동으로 만들어 내는 방식이기에 비용이 거의 들지 않지만, 지식베이스의 질과 양에 영향을 받는다. 본 연구는 원격 지도 학습을 기본으로 관계추출기의 성능을 향상 시키고, 지식베이스를 확장하는 방안으로 반복학습을 제안한다. 실험을 적은 비용으로 빠르게 진행하기 위해 반복학습을 자동화 하는 시스템을 설계하여 실험을 하였고, 이 시스템으로 관계추출기의 성능이 향상 될 수 있는 가능성을 보였으며, 반복학습을 통한 지식베이스의 확장 방안을 제시한다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.27-33
• /
• 2023

The war between Ukraine and Russia continues. Ukraine, with the help of the United States and others, is fighting a superior battle against Russia with advanced weapons applied artificial intelligence. In line with this trend, the Korean military announced Defense Innovation 4.0 to expend investment in defense technology for the 4th Industrial Revolution and to realize a smart military. In order to achieve this effectively, it is necessary to examine the weapons R&D system. This thesis examines the existing weapons research and development system and derives the plans that can rapidly develop Advanced weapons in a timely manner. In addition, the plans for Rapid R&D for the application of the recently introduced 4th industrial revolution technology was also presented. Through this, it was intended to help the Korean military quickly adopt Advanced weapons in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.387-394
• /
• 2024

This paper describes a progressive test and evaluation strategy for verification of Korean Fighter eXperimental (KF-X) AESA(Active Electronically Scanned Array) radar development. Three progressive stages of development test and evaluation were officially performed from simulated test conditions to actual operating conditions according to standards: radar function/performance and avionics integration. KF-X AESA radar development is repeatedly verified by progressive stages consisting of five tests: Roof-lab ground test, System Integration Laboratory(SIL) ground test, Flying Test Bed(FTB) test, KF-X ground test, and KF-X flight test. As a result, the risk factor decreases as stages and tests progress. Therefore, development test and evaluation of KF-X AESA radar are successfully performed at low development risk.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.338-345
• /
• 2024

Magnetic anomaly signals from the ferromagnetic targets such as ships in the sea are measured by drone-based magnetic anomaly detection. A quantum magnetometer is suspended from the drone by 4 strings. Flight altitude and speed of drone are 100 m and 5 m/s, respectively. We obtain magnetic anomaly signals of few nT from the ships clearly. We analyze the signal characteristics by the ferromagnetic target through simulation using COMSOL multiphysics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.265-276
• /
• 2024

The future battlefield operation concept does not focus on advanced and complete weapon systems, but requires a new battlefield operation concept that can effectively demonstrate offensive power by combining a large number of low-cost, miniaturized weapons. Recently, research on the autonomous application of major technologies that make up the mission control system is actively underway. However, since the mission control system is still dependent on the operator's operating ability when operating multiple robots, there are limitations to simply applying the automation technology of the existing mission control system. Therefore, we understand how changes in operator capabilities affect multi-robot operation and propose an adaptive mission control architecture design method that supports multi-robot integrated operation by adjusting the level of autonomy of the mission control system according to changes in operator capability.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• 정보화사회
• /
• s.137
• /
• pp.30-32
• /
• 2000

첨단 TFT-LCD, 정보통신 장비, 자동차용 전자부품 등 미래 지향적인 첨단기술력 확보에 주력하고 있는 현대전자는 직원들의 교육에 있어서도 남다르다. 첨단 미래기술을 선도해나갈 우수 인재의 육성과 국가와 사회에 이바지할 수 있는 우수 인재의 육성을 목표로 기업이념 정립을 위한 정신교육을 위주로한 교육체계는 전통적인 집합식 교육에서 탈피, 인터넷에 구축된 '사이버'교육공간을 통해 외부 전문교육기관의 연계하에 다양하고 전문적인 '열린교육'을 실시하고 있다.