• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.851-860
• /
• 2013

To overcome a scarcity of radio resources to mobile broadband service, the usage of TV white space gains much attraction around the world. This paper carries out an interference analysis either by performing realistic experiments or by executing statistical Monte-Carlo simulation to exploit interference probability. The results obtained from experiments are compared to those from simulations in order to clarify the coexistence of utilization of TV band devices (TVBD) in indoor circumstances. Along the execution of our experiment in the presence of DTV receiver, we apply to a variety of transmission parameters proposed in FCC for TVBD. According to experimental and simulation works, the allowable transmission powers of TVBD systems are exploited for the plausible which are coexist on the first as well as the second adjacent frequency bands. Throughout results, it can conclude that TVBD systems can be coexisted via achieving proper transmission powers depending on the locations of themselves without showing harmful interference to DTV reception.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1518-1526
• /
• 2004

In this paper, an algorithm using wavelet transform for detecting a cut that is a radical scene transition point, and fade and dissolve that are gradual scene transition points is proposed. The conventional methods using wavelet transform for this purpose is using features in both spatial and frequency domain. But in the proposed algorithm, the color space of an input image is converted to YUV and then luminance component Y is transformed in frequency domain using 2-level lifting. Then, the histogram of only low frequency subband that may contain some spatial domain features is compared with the previous one. Edges obtained from other higher bands can be divided into global, semi-global and local regions and the histogram of each edge region is compared. The experimental results show the performance improvement of about 17% in recall and 18% in precision and also show a good performance in fade and dissolve detection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1027-1031
• /
• 2006

Recently, mobile-type analysis system when emergency patient can check his blood condition in the transportation or vessel has being required. Under the present system, it takes lots off-time to know the blood analysis result of patient, so, it may lead to a dangerous situation. But, in this study, analysis time makes to fall down to $1{\sim}min$. to emergency treatment patient more quickly, and you can check the information by wireless PC through Bluetooth base. It is able to measure in about 7minutes from 25minutes of warming-up time in existing facilities by testing temperature peculiarity curve, to operate system without error even minute temperature change by adoption DUAL heating. And Bluetooth base was adopted to reduce power consumption and be able to hospital networking by keeping and sending analyzed data when it needs.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1309-1316
• /
• 2018

Cattle estrus detection system based on Internet of Things is designed and implemented by using Arduino pro-mini, gyroscope, acceleration sensor, bluetooth master and slave module. The implemented system measures cattle's moving and the measured data are transmitted to the computer connected to RX module by bluetooth TX module. They are plotted in 2-dimensional graph on the computer monitor and the number of transition at each sensor axis are calculated from the graph. The detected and gathered data from the system are analyzed by the proposed algorithm to decide which cows are in the estrus or not. The method to apply bluetooth scatternet is shown and the proposed system can be used to increase the success rate of artificial insemination in normal estrus by detecting the cow's behaviors such as the number of jumping. In this paper, the implemented cattle behavior detecting the system(TX module) are strapped on cattle's leg and it measures the cattle behaviors for determining where that a cattle is estrus or not by the proposed algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.757-763
• /
• 2018

It is very difficult to achieve sufficient data rate and required quality of service due to the time-varying nature of the radio channel and various jammers such as path loss, delay, Doppler, shadowing and interference. Especially, the propagation path between the transmitting antenna and the tracking antenna mounted on the fuselage during the test and evaluation of the projectile system considered in this paper is based on the rapid movement of the projectile, the interference due to multipath fading due to the terrain, The propagation path may be blocked. In order to effectively improve the multipath fading occurring in the wireless communication system, a diversity combiner technique is required. In this paper, to derive the design and improvement schemes for the space diversity combiner technique among the diversity combiner schemes, the BER performance of maximum ratio combining (MRC) and selection combining (SC) In an adaptive SC / MRC diversity combiner that operates with MRC when it is lower than the specified threshold criterion when comparing the SNR between two signals received from the channel and operates with SC at high and combines the two received signals The BER performance of the system was compared and analyzed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.294-301
• /
• 2013

The particle matter concentrations in the subway stations should be monitored and controlled for the health of commuters on the subway system. Seoul Metro and Seoul Metropolitan Rapid Transit Corporation are measuring several air pollutants regularly. In this paper, the reliability of the cheap instruments using light scattering method is improved with the help of a linear regression analysis technique to measure the $PM_{10}$ concentrations continuously in the subway stations. In addition, a monitoring system is implemented to display and record the data of $PM_{10}$, $CO_2$, humidity, and temperature. To transmit and receive these measured sensor data, CDMA M2M wireless communication method is applied.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.44-54
• /
• 2007

In the military field, according to the MIL-STD-188-220, which is an Ad-Hoc communication protocol used for sending out or receiving data and voice smoothly among nodes in the situation that wireless communication nodes move arbitrarily, data communication is cut off because nodes can not know topology changes perpetually in the link disconnection state due to node movement in the case that transmitters do not confirm whether data is delivered to receivers or not, and transmit only the data having routine precedence continuously. In order to solve this problem, we have proposed the technique that makes efficient data communication possible by achieving a rapid topology change detection and link information update using TEST frame. We have analyzed TEST frame application effects in the two aspects of the topology update delay time and the data transmission success ratio.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2253_2254
• /
• 2009

무선 모바일 통신 시장의 성장에 따라 수동 소자로 구성된 모듈에 대한 관심이 높아지고 있다. 본 논문에서는 수동소자를 이용한 Wi-MAX용 트리플렉서를 설계하였다. 트리플렉서는 Wi-MAX의 RF Front-end단 앞부분에 연결되며, IEEE 802.16에 따른 2GHz, 3GHz, 5GHz 대역을 선택, 분리해주는 역할을 한다. 제안된 트리플렉서는 저역통과필터, 대역통과필터, 고역통과필터로 구성하였으며, 수동소자의 최소화로 인해 삽입손실 향상을 중점으로 설계하였다. 회로해석 결과, 각 대역별 (2/3/5GHz) 삽입손실은 각각 -0.5dB, -0.6dB, -0.4dB 였으며, 반사손실은 -20dB, -20dB, -12dB, 격리도는 -20dB, -24dB, -25dB의 특성을 보였다. 수동 소자의 최소화 설계로 인해 모듈 및 시스템의 저가화를 기대할 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.231-234
• /
• 2001

OBD-II regulations are already effective in many countries. The California Air Resources Board(CARB) first issued regulations in 1985 for the 1988 model year, known as OBD-I, and required the vehicle's engine management computer to warn the driver by means of a dash-mounted light if a malfunction occurred in either the oxygen sensor, the exhaust gas recirculation(EGR) valve or the evaporative emission system purge solenoid, and to store information on troubles that have no recurrent characteristics. This paper presents two methods of wireless monitoring OBD signal, which is one of the ECU output for self diagnostic measurement. RF module is used to monitor ECU's Self diagnostic signal remotely. Two kinds of measurement systems which are based on micro-controller(80C196KC) for portable detection and PC for sever are considered for receiving the RF signal. Therefore, possibility of real-time monitoring of ECU's self diagnostic signal remotely is verified on this paper.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.5 no.1
• /
• pp.34-39
• /
• 2013

This paper suggests an input device that allows a user not only to naturally interact with education contents in virtual environment but also to sense haptic feedback according to his/her interaction. The proposed system measures a user's motion and then creates haptic feedback based on the measured position. To create haptic information in response to a user's interaction with educational contents in virtual environment, we develop a motion input device which consists of a motion controller, a haptic actuator, a wireless communication module, and a motion sensor. To measure a user's motion input, an accelerometer is used as the motion sensor. The experiment shows that the proposed system creates continuous haptic sensation without any jerky motion or vibration.