• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.829-834
• /
• 2004

Nodes communicate through wireless channels under peer-to-peer level in ad-hoc mobile networks. The nodes are free to move around in a geographical area and are loose]y bounded by the transmission range of the wireless channels. Also, a node is completely free to move around, there is no fixed final topology. Hence, to manage the inter-node communication and data exchange among them a leader node is required. In this paper we introduce an efficient leader election algorithm for mobile ad hoc networks where inter-node communication is allowed only among the neighboring nodes. Furthermore we present the result of performance evaluation through simulation. The algorithm is efficient and practical since it uses least amount of wireless resources and does not affect the movement of the nodes.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.80-84
• /
• 2010

Data multicasting from a source to multiple sinks in wireless sensor networks is used to achieve both reducing communication costs and energy efficiency. Almost all existing schemes for the multicasting might be effectively performed by optimal construction of a multicasting tree between a source and multiple stationary sinks. However, in practical sensor applications, sinks could move around on the wireless sensor networks for own missions, such as scouting of soldiers and saving lives of victims by firefighters. Unfortunately, the sink mobility causes frequent entire reconstruction of the multicasting tree and thus it leads to exhaustion of battery power of sensors. Hence, we propose an energy-efficient multicast protocol to support multiple mobile sinks by the local multicast tree reconstruction, called Local Update-based geographic Multicasting for Mobile sinks (LUMM) for wireless sensor networks. Our simulation results show that our scheme for mobile sinks is more efficient in terms of energy resource management than other exist works.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.98-109
• /
• 2002

Bluetooth technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range :1nd point-to-multipoint voice and data transfer. It operates in the 2.4㎓ ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module with direct memory access method we have developed. This module consists of three blocks; link controller, UART interface, and audio CODEC. This module has a bus interface for data communication between this module and main processor and a RF interface for the transmission of bit-stream between this module and RF module. The bus interface includes DMA interface. Compared with the link controller with FIFOs, The module with DMA has a wide difference in size of module and speed of data processing. The small size module supplies lorr cost and various applications. In addition, this supports a firmware upgrade capability through UART. An FPGA and an ASIC implementation of this module, designed as soft If, are tested for file and bit-stream transfers between PCs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1840-1848
• /
• 2017

Linear wireless sensor networks typically construct a network topology with a high reliability through sequential 1:1 mapping among sensor nodes, so that they are used in various surveillance applications of major national infrastructures. Most existing techniques for identifying sensor nodes in those networks are using GPS, AOA, and RSSI mechanisms. However, GPS or AOA based node identification techniques affect the size or production cost of the nodes so that it is not easy to construct practical sensor networks. RSSI based techniques may have a high deviation regrading location identification according to propagation environments and equipment quality so that complexity of error correction algorithm may increase. We propose a timestamps based sequential localization algorithm that uses transmit and receive timestamps in a message between sensor nodes without using GPS, AOA, and RSSI techniques. The algorithms for distance measurement between each node are expected to measure distance within up to 1 meter in case of an crystal oscillator of 300MHz or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.575-583
• /
• 2013

In ad hoc networks, a distributed timing synchronization is studied using a firefly-inspired approach. We illuminate the exiting synchronization algorithm based on the theory of pulse-coupled oscillators so that the algorithm can be applied to multi-carrier systems through packet-based communications, where nodes communicate over an orthogonal frequency-division multiple access air interface. As our main result, we introduce a new sync-code detector, which optimally designs both the coupling function and the detection threshold when various network parameters such as the number of nodes in the network and network topology are given a priori. Computer simulations are performed to show the convergence to a synchronized state in realistic network environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1606-1616
• /
• 2004

This paper introduces a technique for generating an appropriate template signal via modeling of minimum-phase stable ARMA (Auto-Regressive Moving Average) system for coherent impulse communication systems. It has been well known that the transmitted impulse signal becomes deformed because of dispersive and resonant characteristics. Accordingly, in spite of using ideal template signal at the correlator, these impairments degrade overall performance attributed to low level of coherence. To increase the degree of coherence, our proposed scheme realizes A3U system derived by Gaussian pulse signal, which simulates the overall characteristic of transfer function in between transmit and receive wideband antennas so as to generate an appropriate template signal in a form of output. The performance of proposed scheme will be shown in results from computer simulations to verify its affirmative impact on impulse communication system with regarding several distinctively shaped antennas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.302-305
• /
• 2009

The Multiple vital signs management system using Mobil phone is designed with Wireless sensor network and CDMA which are integrated to create a wide coverage to support various environments like inside and outside of hospital. Health signals from medical sensor node are analysed in cell phone first for real time signal analyses and then the abnormal vital signs are sent and save to hospital server for detail signal processing and doctor's diagnosis. We developed integrated vital access processor of sensor node to use selective medical interface(ECG, Blood pressure and sugar module) and control the self-organizing network of sensor nodes in a wireless sensor network. chronic disease such as heart disease and diabetes is able to check using graph view in mobile phone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.628-631
• /
• 2014

Recently, the proliferation of new applications, e.g., mobile TV, Internet gaming, large file transfer, and the various of user terminals, e.g., smart phones and notebooks, has dramatically increased user traffic and network load. In order to meet this traffic growth, vendors and cellular operators are working on the development of new technologies and cellular standards. Within them, small cell deployment has been heralded as one of most promising way to increase both coverage and capacity of future cellular network. Small cell technology enables to improve capacity of cellular radio network by tight cooperation between small cell and macro cell in multi-tier network where small cells are densely deployed within macro cell coverage. In this paper, we describe the deployment scenarios for cooperation between macro cell and small cells and state-of-the-art technologies related to dense small cell deployment. Then, we also provide design principles and standardization trends for small cell enhancement in 3GPP.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.