• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.327-337
• /
• 2018

무도상 판형교는 교량 바닥판과 도상 없이 주거더에 궤도가 직접 연결되어 있는 구조로 열차 통과로 인하여 발생한 충격이 교량 주부재에 직접 전달되어 높은 수준의 소음 진동 뿐 아니라 교량의 잦은 손상을 유발하는 특성이 있다. 레일 장대화는 무도상 판형교의 이러한 구조적인 문제를 경감할 수 있으며, 이를 위해서는 차량-궤도 또는 궤도-교량 상호작용에 영향을 미치는 인자의 특성에 대한 명확한 이해가 필요하다. 이 연구에서는 레일체결장치, 침목고정장치 및 궤광을 포함한 실제 무도상 판형교에 설치되어 있는 궤도의 종방향 저항력 특성을 실험을 통하여 검토하였다. 실험은 유도상화 시공을 위하여 철거된 실제 교량을 실험실로 이송하여 수행하였다. 실험 결과 목침목용 레일체결장치의 종방향저항력은 KRS TR 0014-15의 성능합격기준을 만족하며, 교량침목고정장치의 종방향 저항력은 구형과 신형 모두 기존 연구보다 높은 값으로 나타났다. 또한 하중 비재하 시 무도상 궤도의 종방향 저항력은 자갈궤도와 콘크리트궤도 사이의 값으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.310-315
• /
• 2001

In this study, railway plate girder bridges are modeled in detail for finite elements within 3-dimension and analyzed by SAP 2000N, a commercial finite element analysis tool. Especially, loads of trains gained by statistical averages of measured true loads of trains are used for analysis. When the loads are adapted, the numerical dynamic responses are very close to real measurements. Resonant speed areas by train types are evaluated from the results of numerical analyses by different driving speeds of trains. For dynamic numerical analysis of railway bridges, reasonable guides are also discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1713-1718
• /
• 2010

An ultimate strength evaluation of the through plate girder bridge using nonlinear inelastic analysis is presented. In this method, separate member capacity checks after analysis are not required, because the stability and strength of the structural system and its component members can be rigorously treated in analysis. The method captures the inelastic redistribution of internal forces throughout a structural system, and allows an economic use of material for highly indeterminate steel bridges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.678-683
• /
• 2002

Field measurements were conducted to analysis dynamic characteristics of existing steel plate girder railway bridges without ballast. Three bridges which have 9m, 12m, 18m span length in Kyoung-Bu and Ho-Nam Line were selected for test. According to the each bridge, dynamic vertical deflections and vertical and horizontal accelerations were measured. Natural frequencies, vertical deflections and accelerations obtained from field tests were compared with the limit value specified in the UC, Japanese and Korean railway bridge specification.

• 한국강구조학회 논문집
• /
• 제17권6호통권79호
• /
• pp.681-688
• /
• 2005

본 연구는 광섬유 브래그 격자 (fiber Bragg grating, FBG) 센서를 이용하여 보강이 실시된 철도판형교의 수직처짐을 산정하고 이를 통해 교량의 정적 및 동적 거동을 모니터링 하는데 목적이 있다. 7개의 센서로 다중화(multiplexing)된 FBG 센서 2쌍을 지간 12.9 m인 철도 판형교의 상부와 하부 플랜지의 표면에 부착하였다. 이렇게 수평 배치된 FBG 센서로부터 직접 곡률을 측정하고 기하학적인 처짐-곡률관계와 회귀분석을 통해 교량의 처짐을 유추하였다. FBG 센서의 정확도를 검증하기 위해 교량의 중앙 지점에 기존의 전기식 변형률 센서와 처짐계를 설치하였다. 교량의 거동을 측정하기 위해 열차 재하실험과 증속실험을 실시하였다. 증속실험은 열차의 속도를 10 km/h 에서 90 km/h까지 10 km/h 씩 증가시키며 교량의 동적 거동을 분석하였다. 측정 변형률을 비교한 결과 FBG 센서와 전기식 센서가 최대오차 7%이내의 우수한 상관관계를 보였으며, 본 연구에서 제안된 실험법으로 유추된 최대처짐을 처짐계를 이용한 결과와 비교하였을 때 5% 이내의 오차를 보였다. 따라서 철도판형교의 안전성 평가를 위한 처짐 모니터링 시 FBG 센서의 적용성이 우수하다고 판단된다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.160-168
• /
• 2006

The major objective of this study is to investigate the effects and application of external post-tensioning method far steel plate girder bridge. It analyzed the mechanical behaviors of steel plate girder bridge with applying external post-tensioning on the finite element analysis, field test and laboratory test fur the lateral dynamic characteristics. As a result, the reinforcement of steel plate girder bridge the external post-tensioning method are obviously effective for the lateral dynamic response which is non-reinforced. The analytical and experimental study are carried out to investigate the post-tension force decrease lateral acceleration and deflection on steel plate girder bridge for serviceability. And the external post-tensioning method reduce dynamic maximum displacement(about $10{\sim}24%$), the increase of dynamic safety is predicted by adopting external post-tensioning method. From the dynamic test results of the servicing steel plate girder bridge, it is investigated that the change degree of natural frequency is very low with applying the external post-tensioning method The servicing steel plate girder bridge with external post-tensioning has need of the reasonable reinforcement measures which could be reducing the effect of lateral dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.717-724
• /
• 2006

The major objective of this study is to investigate the effects and application of improvement for railway steel plate girder bridge by resilient panel track system. It analyzed the mechanical behaviors of steel plate girder bridge with applying resilient panel track system on the finite element analysis and laboratory test for static & dynamic characteristics. As a result, the improvement of steel plate girder bridge with resilient panel track systems are obviously effective for the static & dynamic response which is non-ballast steel plate girder bridge. The analytical and experimental study are carried out to investigate resilient panel track system decrease vertical acceleration and deflection on steel plate girder bridge for serviceability. And the resilient panel track system reduced dynamic maximum displacements (about 59%) and stresses (about 82%), the increase of dynamic safety is predicted by adopting resilient panel track system. From the dynamic test results of steel plate girder bridge, it is investigated that vertical acceleration and deflection is very low with applying resilient panel track system. The servicing steel plate girder bridge with resilient panel track system has need of the reasonable improvement measures which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.437-446
• /
• 2006

The major objective of this study is to investigate the effects and application of improvement for railway steel plate girder bridge by resilient panel track system. It analyzed the mechanical behaviors of steel plate girder bridge with applying resilient panel track system on the finite element analysis and laboratory test for static & dynamic characteristics. As a result, the improvement of steel plate girder bridge with resilient panel track systems are obviously effective for the static & dynamic response which is non-ballast steel plate girder bridge. The analytical and experimental study are carried out to investigate resilient panel track system decrease vertical acceleration and deflection on steel plate girder bridge for serviceability. And the resilient panel track system reduced dynamic maximum displacements(about 59%) and stresses(about 82%), the increase of dynamic safety is predicted by adopting resilient panel track system. From the dynamic test results of steel plate girder bridge, it is investigated that vertical acceleration and deflection is very low with applying resilient panel track system. The servicing steel plate girder bridge with resilient panel track system has need of the reasonable improvement measures which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.206-216
• /
• 2020

국내의 노후 철도교량이 증가함에 따라 노후화로 인한 유지관리비가 점점 증가하고 있으며, 지속적인 관리가 더욱 더 중요해지고 있다. 하지만 관리해야하는 노후 시설물은 증가하지만, 노후 시설물을 점검 및 진단을 할 수 있는 전문 인력은 부족해지고 있다. 이러한 문제를 해결하기 위해 본 연구는 정적 변형률 응답 데이터를 적용하여 AI 기술의 머신러닝 기법으로 구조물의 국부적인 손상을 탐지하는 개선된 학습모델을 제시하고자 한다. 손상탐지 머신러닝 학습 모델을 구성하기 위해 우선 무도상 철도 판형교의 설계도면을 참고하여 교량의 해석모델을 설정하였으며, 설정된 해석모델로 손상시나리오에 따른 정적변형률 데이터를 추출하여 통계적 기법을 이용해 교량의 신뢰도 기반의 Local 손상 지수를 제시하였다. 손상 탐지는 손상 유무 탐지, 크기 탐지, 위치 탐지 3단계의 과정을 수행하여 손상 크기 탐지에서 선형 회귀 모델을 추가로 고려해 임의의 손상을 탐지하였으며, 최종적으로 손상 탐지 머신러닝 분류 학습 모델과 회귀 모델을 이용한 임의의 손상 위치를 추정 및 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1569-1576
• /
• 2011

To install heavy structures in the railway bridges, crane methods or launching methods using temporary structure have been applied. These methods are uneconomical because working yard is required, temporary cut of rail system, etc. In this study, various construction methods has been developed which are suitable to the filed conditions. In the case of simple span structure like plate girder bridges, the girder is loaded to troy system at the working yard and then transferred to the working place. To lift and lower the girder system, a new transfer system was developed. Different methods each for simple span bridge girder and long span girder were developed and detailed work procedures were proposed. Using these methods, the heavy structures can be installed with simple and safe work procedures and the construction cost and duration can be reduced.