• TTA Journal
• /
• s.131
• /
• pp.30-39
• /
• 2010

급격한 기후변화에 의한 집중호우 및 소리 없이 쌓이는 폭설과 잦은 매머드급 태풍 그리고 지진과 해일, 화산활동 등의 자연재해가 언제 어떻게 일어날지 모르는 상황에서 국가는 국민의 생명과 재산을 보호해야 할 막중한 과제를 안고 있습니다. 또한 자연재해뿐 아니라 공공기관에 대한 테러와 자원쟁탈을 위한 국지적인 전쟁과 같은 참사가 지구상에서 수시로 발생하고 있으며, 원자로의 방사능 누출과 지하철이나 철도의 충돌사고 및 가스폭발사고와 초고층 대형 빌딩이나 지하터널, 해저터널 같은 대형구조물의 붕괴 등 인공재난이 수시로 발생하고 있습니다. 이와 같이 재난발생은 대형화 및 다양화되고 있으며, 복합화된 형태로 발생하여 단일 기관으로는 대응하는 데 어려움이 있어서 범 국가적인 통합지휘체계에 의한 재난 관리 및 재난 대응이 필요합니다. 이러한 대형 참사를 사전에 예방하고, 재난 발생시 신속히 대응하여 인명과 재산피해를 최소화하는 방안으로 어떠한 재난 통신 방안이 있으며, 관련 기술 표준과 선진국 등의 구축사례를 통하여 우리나라는 제대로 재난 통신 및 방송이 구축되어 있는 지 살펴보고 이를 통하여 유비무환(有備無患) 및 거안사위(居安思危)의 정신으로 언제 닥칠지 모르는 국가재난에 미리미리 대비하는 계기가 되었으면 합니다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.772-774
• /
• 2012

최근 차량과 플랫폼 사이의 공간에 휠체어의 바퀴 또는 승객의 발이 빠지는 등의 안전사고가 보고되고 있어 교통약자의 이동을 제한하는 요소로 작용함에 따라 차량과 플랫폼 사이 공간을 메우는 안전스텝을 개발하게 되었다. 안전스텝으로 기존 플랫폼에 설치하는 고무타입은 고정식 고무발판을 미리 설치해 두어 차량과 플랫폼의 간격을 미리 줄이는 방식이나 직선, 곡선 형태의 각각의 역사가 가지는 조건에 유연하게 대응하고, 차량의 승객수와 플랫폼의 조건에 따라 달라지는 승하차 높이에 유연하게 대응하고자 차량에 설치하는 방식을 개발하게 되었다. 본 논문에서는 개발한 안전스텝의 구성 및 기능을 설명하고 논하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1263-1265
• /
• 2001

This study presents accurate simulation to examine a reason rail potential rise and how to design ground connection(Cross Connection Cable, CCC) and draw up a plan of an optimal buried grounding system according to section.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1025-1026
• /
• 2008

The level crossing collision accident which comprises more than 90 percent of all level crossing accidents is one of the most serious safety problems. There is a critical need for providing safe strategy and is focusing on the level crossing information rather than measures at a grade crossing. This study is intended to develop technology for accident prevention and damage reduction based on accident cases analysis result and improvement direction to complement shortcomings of safety equipment of conventional level crossing and to establish safety of travelers(train, motor vehicle, person).

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.52-52
• /
• 2017

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.120-120
• /
• 2017

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1701-1708
• /
• 2011

A typical day in the subway transportation is used by hundreds of thousands are also concerned about the safety of the various workrooms with high underground fire or other less than in the subway users could be damaging even to be raised and there. In 2010, in fact, room air through vents in the fire because smoke and toxic gas accident victims, and train service suspended until such cases are often reported. In response to these incidents in subway stations, even if the latest IT technology, wireless sensor network technology and intelligent video surveillance technology by integrating fire and structural integrity, such as a comprehensive integrated surveillance system to monitor the development of intelligent urban transit system and are under study. In this study, prior to the application of the monitoring system into the field stations, authors carried out the ZigBee-based wireless sensor networks performance analyzation in the Chungmuro station. The test results at a communications room and ventilation room of the station are summarized and analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.469-475
• /
• 2010

The railway signalling system plays an essential role in the safe and efficient train operation as serving control functions of train operation intervals and train routes. The reliability and safety of the system are very important because the failure of the railway signalling system can lead to train collision or derailment as well as train operation stop. Until now, in railway signalling system the conventional wayside signal mode has been used generally. There are, however, the risk of accidents such as human mistakes caused by that the driver identifies the signal lamp status and controls train speed with the naked eye. It is also necessary to refurbish the obsolete system. Thereby, It is being effective that the onboard signal mode has been recently introduced and applied in order to transmit the speed control information to train by using the computer and communication equipment. It is necessary to switch over the system in a way while providing passengers with an operation service to replace the obsolete signal system. In this paper, we verify the cases through trial assessment which are solved by the way of adding specific functionalities in the problems of interference among the procedure of switch-over processes and a serial of processes for system verification while a train is operated in the new system in parallel to the existing system.

• Tunnel and Underground Space
• /
• v.16 no.5 s.64
• /
• pp.357-367
• /
• 2006

Recently, as the construction of new railway and the relocation of existing line increase, tunnel structures grow longer. The railway fire accidents in long tunnel bring large damages of human life and disaster. The interest of safety in long tunnel have a growing and the safety standard of long tunnel is tightening. For that reason, at the planning of long tunnel, the optimum design of safety facility in long tunnel for minimizing the risks and satisfying the safety standard is needed. For the reasonable design of long railway tunnel considering high safety, qualitative estimation for tunnel safety is required. In this study, QRA (Quantitative Risk Assessment) technique is applied to design of long railway tunnel for assuring the safety function and estimating the risk of safety. The case study for safety design in long railway tunnel is tarried out to verifying the QRA technique for two railway tunnels. Thus, the inclined and vertical shaft for escape way and safety facilities in long tunnel are planned, and the risks of tunnel safety for each case are estimated quantitatively.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.75-83
• /
• 2023

In general, bridges are facilities installed for the purpose of easily passing through sections such as valleys and rivers. Railway bridges that run through downtown areas are damaged due to external factors such as earthquakes and collisions with passing vehicles, resulting in serious human casualties. This can cause serious human and properties damage, such as functional paralysis in downtown areas. Depending on the degree of damage, repair work such as partial repair or full replacement is in progress for the bridge where the collision occurred. When damage or deformation occurs due to collision, the repair method is determined according to the degree of deformation and the degree to which the load capacity of the bridge is affected by the deformation. In this study, a numerical analysis review was performed on the repair work for the local deformation caused by the collision of a vehicle on an old railway bridge installed and in operation in an urban area. To this end, a structural safety review of the bridge for local deformations caused by vehicle collisions was conducted. In this paper, a repair method for the accident bridge was presented based on the analysis results.