• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.415-420
• /
• 1999

Objectives: We investigated the effects of changes in obesity and life style factors, such as cigarette smoking, alcohol drinking, and exercise, on the changes in blood pressure and serum cholesterol among Korean men. Methods: This study included 7,205 healthy male employees in the steel manufacturing industry. Each subject underwent health examination in 1994 and was re-examined in 1997. The study subjects were classified into four categories, according to changes in body mass index (BMI) (loss; stable; mild gain: severe gain), cigarette smoking (quitter; nor-smoker; smoker continued; smoker started), alcohol drinking (quitter; non-drinker; drinker continued; drinker started) and exercise (more exercise; continuous regular exercise; continuous irregular or no exercise; less exercise), respectively. We evaluated the relationship between the categories of change in those independent variables and the changes in blood pressure and serum cholesterol, adjusted for BMI in 1994 and age by analysis of variance. Results: The change in systolic blood pressure was positively associated with the changes in BMI (p<0.001) and drinking (p=0,001), but negatively with smoking (p=0,004), compared to the first category of each independent variables. The systolic blood pressure was significantly less increased in the continuous smoking group than quitter or hon-smoker. The changes in diastolic blood pressure and serum cholesterol appeared to have statistically significant linear relationships only with the change in BMI. The change in exercise showed a marginal significance with diastolic blood pressure (p=0.088). Conclusions: These prospective data emphasize the importance of obesity as a determinant of the changes in blood pressure and serum cholesterol. In addition, the changes in smoking and drinking habits can affect systolic blood pressure.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.195-201
• /
• 2011

This paper estimates the structural performance of spirally confined concrete having electric arc furnace (EAF) oxidizing slag aggregates. The EAF oxidizing slag is a by-product generated from iron and steel industry. The EAF oxidizing slag have been largely put to low-value-added uses due to its expansive properties of the free-CaO and free-MgO. Recently, this problem has been solved by the advances in steelmaking technology and thereby stabilizing EAF oxidizing slag aggregate. To verify the application of the EAF oxidizing slag aggregate to the structural concrete usage, a total of 27 cylindrical specimens with a diameter of 150 mm and a height of 300 mm were cast and tested. The test parameters were aggregate type and spiral reinforcement yield strength. Experimental results showed that the structural performance of specimens with EAF oxidizing slag aggregates was equivalent to that of confined concrete with natural aggregates.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.117-128
• /
• 2005

This study proposes an integrated monitoring system for data reliability improvement in a steel manufacturing industry. The data obtained from existing steel manufacturing process is not micro data which is gathered at the occurring point, but average value (macro data) which is gathered from the occurring point to ending point. This kind of macro data is not only difficult for a detailed analysis for an error causing factor, but it might cause a fatal influence as well on the quality of produced goods even if the error is within an error tolerance. And during the process of steel production, thousands of data is produced in a second, thus requiring database plan to manage abundant amount of data. Therefore, the following proposed system is capable of collecting as well as analyzing all the data generated from the process of product production. And the system was able to raise the efficiency of the database server by planning the database to handle large capacity data. Also, by applying web-based technology, inquiries and analysis of data with no limit on time and space was possible with PC connected to the intranet. Hence, the system was able to work on effective quality improvement of manufactured products, plus able to raise the reliability of the product. Also, accumulated data from long period of time was used for fundamental material for new controlling model, operation technology, and new product development.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.141-141
• /
• 2016

방식 코팅 기술은 조선해양산업은 물론 에너지, 철강 및 비철 소재, 건설 산업 등 산업 전반에서 폭넓게 적용되고 있다. 또한 산업 고도화에 따라 점차 가혹해지는 소재의 적용 환경을 고려해보면 향후 지속적으로 산업 수요가 증대될 것으로 예상할 수 있는 기술이다. 특히 아크 열용사법을 이용한 방식 코팅 기술은 미국이나 일본과 같은 선진국에서는 해양플랜트, 석유 시추시설 등 대형 해양 구조물은 물론 다리, 항만시설과 같은 철재 또는 시멘트 구조물의 방식 기술로 널리 적용되어 일반화된 기술이다. 그러나 국내에서는 아직까지도 초기 비용 상승 및 미약한 관련 기술 등의 이유로 대부분 방식도료를 사용하고 있는 실정이다. 그리하여 단기 수명에 따른 재시공 시 많은 환경오염을 유발하는 방식도료를 대체할 수 있는 아크 열용사법을 이용한 방식코팅 기술에 대한 관심과 수요가 점차 증가되고 있다. 그 일환으로 본 연구에서는 해양 구조물 강재의 방식을 위해 니켈계 용사재료를 이용하여 아크 열용사 코팅을 실시한 후 다양한 전기화학적 실험을 통해 내식성을 평가하고자 하였다. 아크 열용사 코팅은 구조용 강재 SS400강에 대하여 니켈합금 선재(1.6 Ø)를 사용하여 실시하였다. 용사 시 용사거리는 200 mm, 공기압력은 약 $7kg/cm^2$ 정도로 유지하면서 용사코팅을 실시하여 약 $200-250{\mu}m$ 두께로 코팅 층을 형성시켰다. 그리고 전기화학적 실험은 천연해수 속에서 자체 제작한 홀더(holder)를 이용하여 $3.14cm^2$의 용사코팅 층만을 노출시켜 실시하였다. 그리고 기준전극은 은/염화은 전극을, 대극은 백금전극을 사용하였다. 전기화학적 실험을 통해 부동태 특성 및 용사코팅 층 표면의 양극 용해반응 특성을 분석하기 위한 양극분극 실험은 OCP로부터 +3.0 V까지 실시하였다. 또한 부식전위 및 부식전류밀도 분석을 위한 타펠분석은 OCP를 기준으로 -0.25에서 +0.25 V까지 분극시켜 실시하였다. 그리고 주사전자현미경과 3D 분석을 통해 부식손상 표면을 관찰하였다. 그 결과 니켈합금으로 용사코팅된 강재의 내식성이 상당히 향상되었다.

• Tribology and Lubricants
• /
• v.36 no.3
• /
• pp.117-123
• /
• 2020

In this study, the effect of the pre-mild wear mode test condition on the subsequent severe wear behavior of carbon steel has been investigated when the wear mode is varied according to the sliding speed change during sliding contact. Two sliding speeds of 0.3 m/s and 3 m/s for the mild wear mode test have been chosen and a sliding speed of 1 m/s for the severe wear mode test. A mild wear mode test at two different sliding speeds has been carried out during the severe wear mode test and total sliding distance of the mild wear mode test has been changed at this time. As a result, it could be found that the wear rate of carbon steel under the severe wear mode test after performing a pre-mild wear mode test is significantly reduced, compared with that before performing. However, its wear rate was slightly higher than that under the mild wear mode test. Oxides produced during the pre-mild wear mode test have been found to play a significant role in reducing the wear rate under the subsequent severe wear mode test. In particular, it was found that the effect of a pre-mild wear mode test performed at the sliding speed of 3 m/s has more rapid and the reduction in the wear rate was greater than thst at the sliding speed of 0.3 m/s.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.169-179
• /
• 1994

Recently the construction of residential buildings faces many difficulties due to the shortage of building materials and works. Simplifying the stage of processing and assembling reinforcing rods and increasing the efficiency of them in reinforced concrete construction can be used to settle the difficulties. In the respect, structural wire-fabric and loop wire-fabric is utilized. The purpose of this study, on condition of being $210kg/cm^2$ concrete strength, is to analyze the structural and flexural properties of one-way concrete slabs by testing with different reinforcing type, tensile steel ratio based with minimum steel ratio, boundary condition and splice length which affect the maximum width of crack and ductility factor. From the test results, the ductility factor is approved that the slabs using deformed bar were much better than that using wire-fabric, and 30D of splice length was appropriate in the slabs as splice length. In the control of the maximum crack width the slabs using wire-fabric and loop wire-fabric were much better than that using deformed bar.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.118-125
• /
• 2004

The use of electric arc furnace has been increasing as the steel consumption is increasing and the operation technique of electric arc furnace are developing. But as the use of electric arc furnace is increased, the furnace have produced the adverse effects of power quality: voltage and current harmonics, voltage and current imbalances, low power factor, and voltage flicker. One of the power quality problems, the harmonic have the characteristics of the time-varying and non-linear. This paper analyzed the harmonics for the various operation conditions of electric arc furnace. The power system model with electric arc furnace have been made, and the harmonic's effects on the power system has been analyzed according to the various operating conditions, first melting, second melting, so on. Also, the filter reducing the harmonic components have been designed and its effects on the power system have been examined.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.39-46
• /
• 2020

This paper is considered about centerline segregation of API 5L steel used in pipeline. Mn/S, Nb and C were known as segregated elements in the centerline of pipe thickness. The Mn usually was accompanied by S consisting of long viscous shape. Microstructure of the centerline was composed of MnS and Nb/Ti indusions including oxide. The segregation effect in centerline region was analyzed by OM, SEM/EDS and micro Vickers hardness. The Mn, Nb and C are retarded elements in transformation from austenite to ferrite or martensite. These elements could derive a bainitic microstructure as a kind of martensite, which is different from difference and element segregation between in matrix and centerline derived from steel melting and heat treatment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2004

The purpose of this study was to investigate the effects of sleep/wake behavior for shift workers in the iron and steel industry using wrist actigraph for 59 male workers on a continuous full-day three-team three-shift system of backward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for 15 days (l shift cycle) for each subject. The sleep length at home during night shift decreased significantly as compared to the morning or evening shifts. The night shift nap length increased significantly in all sections as compared to the morning or evening shifts. The nap length in the Steel Manufacturing Process and Rolling Process during night shift decreased significantly as compared to the Machine Maintenance Section, the Forwarding of Products Section, and the Field Management Section. However, the sleep length at home while off-duty period increased significantly. The percentage of nap length during night shift in the Rolling Process, Steel Manufacture Process, and the other three types of jobs was 16.0%, 20.4%, and about 50.0%, respectively. The nap length during night shift for the above 50 year olds increased significantly as compared to the below 50 year olds. Finally, we discussed the role of nap-taking during the burden on night shift workers and the increased difficulty in continuing their job.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.643-672
• /
• 2006

This study has assessed the industrial human toxicity index by means of toxic substances emissions in South Korean industry. The data used in analysis are the 146 kinds of the toxic chemicals emissions and final demands, total outputs in the input-output table. As a results, human carcinogenic index was $11.86198{\times}10^3$ for overall industries, and $0.26360{\times}10^3$ for average. The industries of higher human toxicity index can be ranked as follows: Mother vehicles and parts (7.85033) > Pig iron and crude steel(4.57409) > Primary iron and steel products(4.36668) > Other transportation equipments and parts(3.43293) > Inorganic basic chemical products(2.64379), etc. Such result can be considered as the priority order of regulation based on industrial characteristics, when the demand and industrial policies should be carried out for the deduction fof toxic substances.