• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.

• Magazine of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.66-72
• /
• 2001

지구 온난화, 천연 자원의 고갈, 처분 장소의 핍박 등 환경문제가 사회적인 문제로 대두되고 있다. 특히 건설분야에서 천연산 골재의 부족은 매우 심각한 상황에 있으며, 이를 해결하기 위해 재생골재의 재활용 등 많은 연구가 이루어져 1999년도에는 아스팔트 콘크리트용 재생골재(KS F 2572), 콘크리트용 재생골재(KS F 2573), 도로기층용 재생골재(KS F 2574)에 대한 규격을 제정함으로써 실용화의 단계에까지 이르고 있다 그러나 제철소의 제강 및 정련 공정상에서 발생하는 철강슬래그를 콘크리트용 골재로서 활용하기 위한 국내의 연구는 몇몇 연구자들에 의해서만 이루어지고 있어 초기 단계에 있다고 할 수 있다. 이에 본고에서는 콘크리트용 천연산 골재의 대체 재료로서 각종 철강슬래그의 적극적인 재활용을 도모하기 위해 최근 슬래그를 골재로서 사용하기 위해서 연구한 결과 및 실례를 수록한 문헌을 조사 검토하여 슬래그 골재의 특성에 대하여 소개하고자 한다.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.9-16
• /
• 1996

The purpose of ths rescarch was to detcrmine a po\sihle application of the slag thc sliigs of iron-and steelmaking as afiller at asphalt concrete. The slags were crnshed for bcller recycling of lhree typical slags as ascon tiller. and thcn thcphysical and chemical properlies welt examincd The mechanical properliea of asphall cnncrete after filling with slagpowders under 200 mesh us fillers wcre tested to fulfill thc Korean Standnrds. Optimum tempcrafure of mixing the slagswith asphalt wils 140-160$^{\circ}$C. The density, the stabilily. gap ratio and the samration degree were 2.37 glcm', 810 kg. 3.4"'||'&'||'and 80.4%, respectively.tively.

• Magazine of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.28-30
• /
• 2012

• Magazine of RCR
• /
• v.11 no.3
• /
• pp.8-13
• /
• 2016

• Magazine of RCR
• /
• v.8 no.1
• /
• pp.8-10
• /
• 2013

• Magazine of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.34-38
• /
• 2007

• Magazine of RCR
• /
• v.13 no.4
• /
• pp.22-32
• /
• 2018

• Magazine of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.28-33
• /
• 2007

• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.115-123
• /
• 2013

The steel industry, a representative industry that significantly consumes raw materials and energy, produces steel as well as a large amount of by-product steel slag through the production process. The vast habitat foundation of marine life has been destroyed due to recent reckless marine development and environment pollution, resulting in intensification of the decline of marine resources, and a solution to this issue is imperative. In order to propose a method to recycle large amounts of by-product slag into a material that can serve as an alternative to natural aggregate, the engineering properties and applicability for each mixing factor of environment friendly porous concrete as a material for the composition of marine ranches were evaluated in this study. The test results for percentage of voids per mixing ratio revealed that the margin of error for all conditions was within 2.5%. The compressive strength test results showed that the most outstanding environmental friendly porous concrete can be manufactured when mixing 30% slag aggregate and 10% specially treated granular fertilizer for the optimum volume fraction. As concrete for marine applications, the best seawater resistance was obtained with mixing conditions for high compression strength. An assessment of the ability to provide a marine life habitat foundation of environmentally friendly porous concrete showed that a greater percentage of voids facilitated implantation and inhabitation of marine life, and the mixing of specially treated granular fertilizer led to active initial implantation and activation of inhabitation. The evaluation of harmfulness to marine life depending on the mixture of slag aggregate and specially treated granular fertilizer revealed that the stability of fish is secured.