• Title/Summary/Keyword: 천이속도

Search Result 248, Processing Time 0.031 seconds

Experiments on the Detonation Propagation in Small Tubes (가는 관내에서의 데토네이션 전파에 관한 실험적 연구)

  • Lee Bok-Jik;Shepherd Joseph E.;Jeung In-Seuck
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2006.05a
    • /
    • pp.314-318
    • /
    • 2006
  • The interest on the detonation in small tubes, which can be applied to the ignition devices of propulsion system, is increasing. However, the propagation dynamics of detonation waves in small tubes has not been investigated clearly yet. In the present experiments, propagations of detonation waves in stoichiometric propane-oxygen mixture through transparent tubes were recorded using a high speed camera and average velocities were measured as well. In terms of average velocity, there exists a transition regime where the waves show smooth transition from the normal Chapman-Jouguet(CJ) detonation to the low velocity detonation$(\sim0.5V_{CJ})$ along the decreasing initial pressure. In this transition regime, the detonation waves are highly unstable and show cyclic or intermittent longitudinal velocity fluctuation.

  • PDF

A study on velocity profiles and inlet length of developing transitional pulsating flows in the entrance region of a square duct (정4각 덕트 입구영역에서 천이파동유동의 속도분포와 입구길이에 관한 연구)

  • 유영태;모양유;홍성삼
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.15 no.2
    • /
    • pp.92-104
    • /
    • 1993
  • In the present study, the velocity profiles and entrance length of developing transitional pulsating flows are investigated both analytically and experimentally in the entrance region of a square duct. The systems of conservation equations for transitional pulsating flows in a square duct are solved analytically by linearizing the non-linear convective terms. Analytical solutions are obtained in the form of infinite series for velocity pofiles. The experimental study for the air flow in a square duct(40mm*40mm*4000mm) is carried out to measure velocity profiles and other parameters by using a hot-wire anemometer with a data acquisition and processing system. The distribution of velocity profiles( $u_{ps}$ / $u_{m,ta}$) in the decelerating period is higher than in the accelerating period. The distribution of the axial component of the axial component of velocity in the transitional flow is nearly uniform in the central region of the duct, and decrease rapidly near the wall. The entrance length correlation of the transitional pulsating flows in a square duct is obtained to be $L_{e}$/ $D_{h}$=0.83 $A_{1}$R $e_{ta}$ /(.omega. sup+1)$^{2}$TEX>

  • PDF

Nucleophilic Substitution at a Carbonyl Carbon Atom (Ⅷ). Kinetics and Mechanism of the Reactions of Chloroformates with Substituted Anilines and Halides (카르보닐 탄소원자의 친핵성 치환반응 (제8보). 염화포름산물과 치환아닐린 및 할라이드와의 반응에 관한 속도론적 연구)

  • Cho Won-Jei;Kim Jack C.;Lee Euk-Suk;Lee Ikchoon
    • Journal of the Korean Chemical Society
    • /
    • v.20 no.6
    • /
    • pp.453-459
    • /
    • 1976
  • Rate constants for the reaction of methyl chloroformate with substituted anilines, and for the halogen exchanges in phenyl chloroformate have been determined in acetone. Although the rate data can be interpreted equally well with the addition-elimination mechanism($S_AN$) involving an intermediate, results of MO and isotope effect studies strongly favor the synchronous ($S_N2$) mechanism for the reactions studied. It was concluded that for the fast reacting nucleophiles the transition state is of "late" type while for the slow reacting nucleophiles it is of "early" type.

  • PDF

Transient Elastodynamic Mode III Crack Growth in Functionally Graded Materials (함수구배재료에서 천이탄성동적모드 III 균열전파)

  • Lee, Kwang-Ho
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.7
    • /
    • pp.851-858
    • /
    • 2010
  • A generalized elastic solution for a transient mode III crack propagating along the gradient in functionally graded materials (FGMs) is obtained through an asymptotic analysis. The shear modulus and density of the FGMs are assumed to vary exponentially along the gradient. The stress and displacement fields near the crack tip are obtained in terms of powers of radial coordinates, and the coefficients depend on the time rates of the change of the crack tip speed and stress intensity factors. The influence of nonhomogeneity and transients on the higher order terms of the stress and displacement fields is discussed.

Variable Time-Scale Modification of Speech Using Trasient Information (천이구간 정보를 이용한 음성의 가변적인 시간축 변환)

  • Lee, Sung-Joo;Kim, Hee-Dong;Kim, Hyung-Soon
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.6
    • /
    • pp.147-155
    • /
    • 1998
  • Conventional time-scale modification methods have the problem that as the modification rate gets higher the time-scale modified speech signal becomes less intelligible, because they ignore the effect of articulation rate on speech characteristics. In this paper, we propose a variable time-scale modification method based on the knowledge that the timing information of transient portions of a speech signal plays an important role in speech perception. After identifying steady protions only. The result of subjective preference test indicates that the proposed method produces performance superior to that of the conventional SOLA method.

  • PDF

Technical Survey and Analysis of DSSS (직접대역확산방식 기술조사 및 분석)

  • Lim, You-Chol;Ma, Keun-Soo;Kim, Myung-Hwan;Lee, Jae-Deuk
    • Aerospace Engineering and Technology
    • /
    • v.10 no.1
    • /
    • pp.45-53
    • /
    • 2011
  • This paper is technical review about Direct Sequence Spread Spectrum(DSSS) to apply in launch vehicle system. First, we introduce communication protocol(carrier frequency, code length, process gain, data rate, chip rate etc) about several application system using DSSS. And then, we survey and summarize the effect of doppler shift to the DSSS. The doppler shift is important error factor for PN code tracking in the fast moving system like launch vehicle. So, spread spectrum code acquisition technique for a direct sequence system in the presence of doppler effect must be investigated.

Effects of Tin Addition on Microstructure and Corrosion of Zr-based Alloys (다원계 Zr합금에서 Sn첨가가 미세조직과 부식특성에 미치는 영향)

  • Kim, Jong-Seong;Park, Sang-Yun;Lee, Myeong-Ho;Jeong, Yong-Hwan;Jeong, Yeon-Ho
    • Korean Journal of Materials Research
    • /
    • v.9 no.10
    • /
    • pp.978-984
    • /
    • 1999
  • ZrNbFeCu-xSn 합금을 진공 아크 용해법으로 제조하여 $360^{\circ}C$의 물, $400^{\circ}C$의 수증기 및 36$0^{\circ}C$의 70ppm LiOH 분위기에서 부식실험을 실시하였으며, 시편의 미세구조는 광학현미경, SEM 및 TEM으로 관찰하였다. 36$0^{\circ}C$에서 210일까지 부식 실험한 결과 대부분의 합금이 천이 전 영역에서의 부식거동을 보였다. $400^{\circ}C$ 경우, 초기에는$ 360^{\circ}C$에서의 부식거동과 비슷한 경향을 보였으나 80일 이후부터는 천이현상이 발생하여 부식속도가 급격히 증가하는 경향을 나타내었는데, Sn량이 많을수록 보다 빠른 시간에 천이현상이 발생했다. LiOH 용액에서는 전반적으로 $400^{\circ}C$에서 보다 더 늦은 시간에 천이현상이 발생했다. 석출물은 Zr(Fe,Cu)$_2$나Zr(Fe,Cu)$_3$로 추정되는 성분을 가지지만, Sn의 증가에 따라 석출물의 조성이나 크기는 거의 변화가 없는 것으로 관찰되었다.

  • PDF

Effects of Launching Vehicle's Velocity on the Performance of FTS Receiver (발사체의 속도가 FTS 수신기의 성능에 미치는 영향)

  • Kang, Sanggee
    • Journal of Satellite, Information and Communications
    • /
    • v.9 no.3
    • /
    • pp.27-32
    • /
    • 2014
  • A doppler shift is generated by moving a transmitter or receiver operated in communication systems. The doppler frequency shift between a transmitter and a receiver or the frequency offset present in transceivers must be removed to get the wanted system performance. FTS is used for preventing an accident from operating abnormally and for guaranteeing public protection. A launching vehicle's initial velocity is very fast in order to escape the earth and the amount of doppler shift is large. Recently many studies to adopt the next generation FTS are ongoing. To introduce new FTS, the effects of doppler shift on the performance of the new FTS must be studied. In this paper the doppler effect caused by launching vehicle's velocity affecting the performance of FTS receiver is investigated into two cases, one is for EFTS as a digital FTS and the other is for FTS using a tone signal. Noncoherent DPSK and noncoherent CPFSK are considered as the modulation methods of EFTS. In the cases of the doppler frequency shift of 200Hz present in EFTS using noncoherent DPSK and noncoherent CPFSK are simulated. Simulation results show that $E_b/N_o$ of 0.5dB deteriorates in the region of near BER of about $10^{-5}$ in RS coding. And there is no performance variation in $E_b/N_o$ or $E_b/N_o$ is worsened about 0.1dB in the same BER region for the case of using convolutional and BCH coding. Quadrature detector used in FTS using tone signals is not influenced by the doppler frequency shift.

Effects of heating rate on the bonded interlayer in base metal powder mixture used transient liquid phase diffusion bonded Ni-base superalloy (모재 분말 혼합 삽입재를 이용한 니켈기 초내열합금의 천이액상확산접합에 있어서 가열속도가 접합부에 미치는 영향)

  • 김성욱;장중철;김재철;이창희
    • Proceedings of the KWS Conference
    • /
    • 2004.05a
    • /
    • pp.48-50
    • /
    • 2004
  • TLP 접합 공정에서 모재와 삽입금속 사이에서의 확산을 통하여 액상 삽입금속은 고온에서 등온으로 유지 시 등온 응고된다. D.S.Duvall은 느린 가열시 매우 빠른 속도로 가열 시 보다 낮은 온도에서 dissolution이 완료되고 응고가 발생할 것으로 예상하였다. (중략)

  • PDF

Efficient C Code Generation for Logic Circuit Simulation (논리 회로 시뮬레이션을 위한 효율적인 C 코드 발생)

  • 한기영;표창우
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2001.10a
    • /
    • pp.367-369
    • /
    • 2001
  • 논리 회로는 하드웨어로 직접 구현할 수도 있으나, 설계된 디지털 논리를 프로그램으로 구현하고 이를 내장형 프로세서가 실행하게 하는 방식으로 구현할 수 있다. 이러한 구현은 내장형 시스템에 적합하도록 코드 크기와 실행 속도가 효율적이어야 한다. 본 논문에서는 복사 전파, 데드코드 삭제, 위상 정렬등의 컴파일러 최적화 기술과 함수 단위 모듈 개념을 도입하여 신호 흐름 분석 기법의 C 코드 자동 발생기를 구현하였다. 회로 시뮬레이션 구현 기법 중 유한 상태 천이 모델 기법으로 코드를 발생하는 Esterel 시스템과 성능 비교 실험을 한 결과, 코드 크기는 평균 84.17%로 감소되었으며 실행 속도는 평균 4.68배로 향상되었다.

  • PDF