• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.176-182
• /
• 2014

This paper introduces the development of global fringe search (GFS) software for preprocessing of Daejeon Correlator. In case of the VLBI observation, a observer conducts the observation for the reference sources with strong and point-like radio stars on schedule in order to confirm the well-observedness of the radio source by the radio telescope. The correlator performs the correlation for the reference sources to detect the fringe completely. We developed the GFS software by calculating the precise delay time between each observatory based on specific observatory. Then, this software calculates the precise delay time by using the delay model (correlator model) of reference source and information of time offset between the Hydrogen Maser frequency standard and GPS (Global Positioning System) clock located in each observatory through the correlation preprocessing. In order to confirm the performance of the developed software, experiments were carried out for the reference sources and target sources observed by the KaVA (KVN and VERA Array). Experimental results show that the GFS software has effectively good performance by finding the precise delay time offset according to the comparison between the compensated delay time offset and one without compensation.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.21-26
• /
• 2005

The work of VLCC SPM mainly is accomplished on the open sea On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now bemuse of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. Now our country is at the blank stage about the establishment of SPM research Most of the situations are refer to overseas standard But these standards lack of consistency and clarity. So when moving to the other safety place from SPM, we must carry through the researching and study on the ships using by sailing data of AIS. we must put forward a new standard about maneuvering area of ship in moving at SPM.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.19-25
• /
• 2005

The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, bemuse of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now bemuse of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. Now our country is at the blank stage about the establishment of SPM research Most of the situations refer to overseas standards. But these standards lack consistency and clarity. So when moving to the another safe place from SPM, we must Carry through the research and study on the ships using sailing through AIS Data We must put forward a new standard about maneuvering area of ships moving at SPM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.319-326
• /
• 2014

The accurate geo-referencing processes that apply ground control points is prerequisite for effective end use of HRSI (High-resolution satellite imagery). Since the conventional control point acquisition by human operator takes long time, demands for the automated matching to existing reference data has been increasing its popularity. Among many options of reference data, the airborne LiDAR (Light Detection And Ranging) data shows high potential due to its high spatial resolution and vertical accuracy. Additionally, it is in the form of 3-dimensional point cloud free from the relief displacement. Recently, a new matching method between LiDAR data and HRSI was proposed that is based on the image projection of whole LiDAR data into HRSI domain, however, importing and processing the large amount of LiDAR data considered as time-consuming. Therefore, we wmotivated to ere propose a local LiDAR chip generation for the HRSI geo-referencing. In the procedure, a LiDAR point cloud was rasterized into an ortho image with the digital elevation model. After then, we selected local areas, which of containing meaningful amount of edge information to create LiDAR chips of small data size. We tested the LiDAR chips for fully-automated geo-referencing with Kompsat-2 and Kompsat-3 data. Finally, the experimental results showed one-pixel level of mean accuracy.

• Journal of radiological science and technology
• /
• v.31 no.4
• /
• pp.347-353
• /
• 2008

This study is to prepare an evaluation standard about personal information protection and security management of a medical institution and to build up a grade standard of evaluation in PACS environment. We built up evaluation index based on 10 detailed items in four big categories (political security, technical security, data management security and physical security) by referring to ISO17799 (BS 7799), HIPPA (Health Insurance and Portability and Accountability Act of 1996) and domestic medical law. We have investigated at the thirty places where medical facility with the extracted security criteria and security evaluation index. Average score of physical security list, one of the big categories, was 18.5/20 (93%) at all medical institutions. Political security score was 18.5/30 (62%), data management security score was 12/20 (60%) and technical security score was 17.5/30 (58%). Therefore, security evaluation score was average 67 in 30 general hospitals, which was 4th level. The results showed that it is necessary to establish evaluation and management standard about personal information protection and security consciousness which are weak in PACS environment.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.195-195
• /
• 2011

본 연구는 방염성능시험에 의한 필름 및 도료처리 시료를 대상으로 화재 시 발생하는 연소가스 중의 독성에 대하여 NES 713 방법에 의해 분석하고, 독성지수를 확인함으로써 연소 시 인체에 미치는 영향을 간접적으로 확인해 보고자 하였다. 기존 방염제품 중 필름과 도료처리 그리고 도료처리 후 기간이 경과한 시료의 3가지로 실험군을 구분하였으며, NES 713 방법으로 연소가스를 분석하고 독성지수를 평가하였으며, 추가로 기존의 국내 노출기준과의 비교를 수행하였으며, 국내 NES 713 방법을 활용한 선행연구들을 참조하였다. 발암가능 추정물질인 아크릴로니트릴은 총 18개의 시료에서 검출되었으며, 포름알데히드는 9개의 시료에서 검출되었다. 염화수소와 브롬화수소는 각각 5개의 시료들에서 검출된 반면에 도료처리된 시료에서는 각각 1개만이 검출되었다. 그 외 일산화탄소와 이산화탄소 그리고 질소산화물은 모든 시료에서 공통적으로 검출되었다. 독성지수는 최소 3.5에서 최고 9.4의 값을 갖는 것으로 나타났다. 본 연구에서 수행한 NES 713 분석결과와 독성지수 산출 및 기존 국내 노출기준과의 비교를 수행해 본 결과는 다음과 같았다. 첫째, 현행 국내 기준 상 방염제품의 독성시험 등에 관한 기준이 없고, 둘째, 방염제품에 대한 연소가스 독성 등을 평가한 선행연구가 제한적이라는 점에서 의미가 있을 것으로 사료된다. 하지만 독성지수의 적용이 국내에서 이루어지고 있지 않은 현실에서 산출도나 독성지수의 위해정도를 평가하기 어렵고, 시료의 수량이 총 18개로서 많지 않았다는 점에서 전체 방염제품의 연소가스 독성의 잠재적인 위험성을 추정할 수는 있지만 대표성을 갖기에는 문제점이 있다는 한계성을 벗어날 수 없었다. 따라서 향후 후속 연구에서는 보다 많은 방염제품들을 대상으로 무작위 선정을 통한 연구 설계 및 실험 연구가 수행된다면 보다 객관적이고 대표성을 지닌 연구결과를 도출할 수 있을 것으로 기대한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.67-70
• /
• 2014

본 논문은 TTA 에서 제정된 "HTML5 기반 스마트 TV 플랫폼" 표준(TTAK.KO-07.0111/R1)에 따라 개발된 스마트 TV 수신기가 표준의 기술 요구사항을 준수하여 적합하게 구현되었는지를 검증하기 위한 표준 적합성 시험환경을 소개한다. 적합성 시험을 위한 시험 기준과 수행절차, 판정 기준 등을 정의하고 있는 "HTML5 기반 스마트 TV 플랫폼 수신기 적합성 시험" 표준(TTAK.KO-07.0119)에 따라 200 여개의 테스트 케이스가 개발되었으며 이들은 스마트 TV 수신기에서 직접 동작하면서 수신기의 기능을 검증하고 결과를 판단하게 된다. 테스트 케이스를 실제 방송환경과 유사한 조건에서 실행하기 위하여 지상파, 케이블, IPTV, 위성 등 다양한 방송 헤드앤드를 활용한 방송 송출 서버를 구현하였으며, 시험에 관련된 정보를 처리하고 실제 시험의 수행 및 그 결과를 관리하는 적합성 시험 관리 시스템을 개발하였다. 그리고 테스트 케이스 앱을 호스팅하는 웹서버, VOD 콘텐츠를 위한 스트리밍 서버 등의 장비를 운용하여 적합성 시험을 위한 전반적인 환경을 구축하였다. 또한 본 논문에서는 구축된 시험 환경에서 표준 기반으로 개발된 참조 수신기를 대상으로 적합성 시험을 수행한 사례를 통해 시험환경의 유효성을 확인하고 향후 적합성 시험환경의 추진 방향을 제시한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1303-1313
• /
• 2013

In this study, the reference values for the internal forces of the rail supports caused by a wheel load, a unit vertical displacement, a unit end rotation in examination of the serviceability of concrete slab track bridge were obtained. In analysis, the analysis models of which the rail was continuously and discretely supported by elastic springs were used. The internal forces of the rail supports from the analysis were compared with the results provided in the DS 804 regulations and agreed with well. In addition, the effects of the space between the rail supports and the stiffness of fastener on the internal forces of the rail supports were investigated.

• Journal of the Korean Society for information Management
• /
• v.25 no.3
• /
• pp.5-25
• /
• 2008

Individuals and organizations in the modern society produce diverse digital objects everyday, which are not only valuable information resources at present but also will be invaluable digital heritage for the future generation. TRAC(Trustworthy Repositories Audit & Certification: Criteria & Checklist) is one of the evaluating tools against which digital archives could be assessed for their preparedness to perform the task of long-term preservation. The current study uses TRAC to assess OASIS(Online Archiving & Searching Internet Source). The results show that the web archive has a greater room for strengthening in the object management infrastructure than in organizational and technical infrastructures.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.3
• /
• pp.155-164
• /
• 2004

Advanced spent fuel Conditioning Process(ACP) project which is under development for efficient spent fuel management has finished process feasibility study and is preparing $\alpha$-${\gamma}$ type hot cell construction for process experimentation. Radiation dose evaluation for the radioactive nuclides were preliminarily performed for normal operation and accident case with the basic concept design report, the meteorological data and the recent site specific data. According to the production and release rate of nuclides, dose evaluations for residents around facility were performed. The evaluation result shows a safe margin for regulation limits and SAR(Safety Analysis Report) limit of IMEF(Irradiated Material Examination Facility) where this facility will be constructed.