• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.372-375
• /
• 2009

반도체 봉지재란 실리콘 칩, 골드와이어, 리드프레임 등의 반도체 소지를 열, 수분, 충격으로부터 보호하기 위해 밀봉하는 재료로서 EMC(Epoxy Moding Compound)가 가장 많이 쓰인다. EMC는 기계적, 전기적 성능향상을 위한 무기재료로 실리카(Silica), 열에 의해 경화되어 3차원 경화구조를 형성하는 에폭시수지, 빠른 경화특성을 부여하기 위한 경화제로서의 페놀수지, 유기재료와 무기재료 사이의 결합력을 높이기 위해 커플링제, 카본블랙, 이형성 확보를 위한 왁스(Wax), 착색제(Colorant), 난연제(Flame Retardant)등의 첨가제로 구성되는 복합소재로써 본 연구에서는 에폭시의 유형에 따른 용융 실리카를 주충진재로 하여 각각의 봉지재의 첨가제를 기준으로 할 때 다양한 형태의 친환경 비할로겐계 반응형 난연제를 합성하는 기술을 개발하고 비 할로겐계 및 Sb 계 첨가형 난연제의 혼용 배합을 통해 친환경 EMC용 난연제의 제조기술을 개발하였다. 이들 EMC의 요구특성은 요구특성은 외부환경으로부터 칩 보호, 칩을 전기적으로 절연특성 유지, 칩의 작동시 발생되는 열의 효과적인 방출 특성 유지, 실장(Board Mounting)의 간편성 특성을 확보해야 하는 특성을 지니고 있어 이들 요구특성에 적합한 특성조사가 함께 이루어졌다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.472-478
• /
• 1989

Using the SMC(sheet moulding compound) composite material consisting of E-glass chopped strand mat and unsaturated polyester resin, three-point bending tests are carried out to evaluate the elasto-plastic fracture toughness by means of R curve. The crack extension is experimentally observed with the ink staining method. The point of stable crack growth is discussed in consideration of the load-load point displacement curve, the damage behavior of the notch vicinity, and the R-curves. The damage zone of the notch vicinity was composed of the initiation and growth of subcracks as well as those of the main crack. The point of stable crack growth can be defined as the inflection point in the R curves and its point also concurrs with the proportional limit on the load-load point displacement curve.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.79-87
• /
• 2007

This study investigated the effects of lacquer-finishing to prevent discoloration of coloring chestnut wood coated with natural dyes from deteriorating factors such as lights (indoor, 500 lux and outdoor, 50,000~70,000 lux), acid, alkali, and heat through measurement of color difference. Lacquer-finishing coating contributed to protection of intrinsic color of the natural dyeing woods in spite of severe treatment. In particular, dyeing liquor with alkali pH played a great role in prevention of light discoloration.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.100-107
• /
• 2017

This experiment was carried out to analyze the effects of substrate reuse on the growth and yield of summer paprika in cyclic hydroponics. The test group was divided into a new coco slab, one year reused coco slab two year reused coco slab based on 30% nutrient solution reuse, and was performed from April 18 to November 31, 2016 for 30 weeks. As a result, plant height of early growth was that the 2 year reused slab was longer than the new slab but the final growth period was 56.58 cm shorter. First group flower position was that reused slab was shorter by 2.92 cm than the new slab and the second group flower position was 0.31 cm long. The relative internode length of early growth, when the reused slab was used, the imbalance in the late growth stage was increased compared with the use of the new slab. The number of growth nodes in the 1 and 2 year reused slab was the smallest with 27.4 nodes. However, the number of harvested nodes did not show the difference in the test group, and the ratio of harvested that the 2 year reused slab was the highest at 26.8%. The ratio of unmarketable fruit tended to increase as the growth progressed. Fresh weight was 227.7g for new slab, 219.2g for 2 year reused slab and 21.2g for 1 year reused slab. The dry weight of the new slab increased with the reuse of the slab. It was 17.13g for new slab, 18.26g for 1 year reused, and 19.28g for 2 year reused. The average water content of the entire growth period was smaller as the slab was reused, and the 1 year reused slab was about 20g less than the 2 year reused slab. This trend was steadily occurring throughout the entire growing season. Especially, the reused slab for 1 year was less than 60g after 3 groups compared to other test groups. In conclusion, If will control seriously occurrence of unmarketable fruits by weakening after medium growth in summer-cultivated paprika in EC-based recycling hydroponic cultivation with reused cocopeat substrate, It is not what I have to worry that decrease of the yield and deterioration of the quality due to the change of physical and chemical properties of the slab and the pathogenic bacteria infection.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.156-161
• /
• 2020

Recently, as there has been growing demand for aesthetic quality in structural materials, the development of excellent color cement concrete having good coloration properties has become a requirement. This study is designed to analyze the basic physical properties of mortar and the properties of keeping the coloration under an ultraviolet ray accelerated weathering test environment according to changes in the mixing ratio between carbon black and iron oxide used as colorants. The test results show that the use of carbon black and iron oxide reduces the initial flow by 6.3~17.2 % and the air content by 3.5~31.5 % but increases the unit volume weight by 3.4~5.5 %, compared to ordinary Portland cement (OPC). In addition, the study shows that the addition of iron oxide increases the self drying shrinkage. So, caution needs to be taken on the workability of the concrete. The brightness value L^⁎ represented by black showed the most excellent black colour when carbon black 3 % and iron oxide 5 % are added. According to UV accelerated weatherproof test, the brightness value L^⁎ was found to increase in all experiment specimens by 4.28~11.97 %, and the color change by UV was found to be higher for the case where carbon black colorant was not used. Therefore, in terms of color revelation characteristics, the case using carbon black 3 % and iron oxide 5 % was found to show the best black color.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.131-147
• /
• 2017

The purpose of this study is to analyze the characteristics of Punchong and Whiteware pottery excavated from the kiln site in Dongkok-Town, Gimge. Scientific analysis is carried out to evaluate the physical and chemical properties of the body and glaze. The physical properties indicate the gradual development of the production technology with respect to the kiln operating conditions and period. In chemical properties, the ceramic body is found to be made of raw materials from the same source, but the mixing method depends on the type of Punchong and Whiteware pottery, the production kiln, and period. Whiteware pottery is manufactured with less over 1.3% of the colorant content and more about 1.2% of the $K_2O$ flux content than Punchong pottery. This compositions allow easier vitrification at the same temperature. These characteristics which is low colorant content and high flux content become more prominent as lately. The ceramic glaze is likely to have changed the type of raw materials used after 16~17C, as the contents of MgO, $TiO_2$, MnO, $P_2O_5$ are less three to ten times than 15C.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.70-78
• /
• 2007

This study explored the efficient dyeing method of aged chestnut wood using the natural dyes extracted from Gardenia jasminoides for, grandiflora, Carthamus tinctorius L., Rhus javanica L., Lithospermum erythrorhizon S. et Z., Caesalpinia sappan L. and Castanea crenata S. et Z.. The color variation of the dyed chestnut woods was also quantitatively evaluated. The wood specimens revealed abundant colors through different dyeing conditions such as dyeing temperature, dye pH, soaking time, and brushing frequency. The chroma and stain concentration of colored woods were calculated with $L^*$, $a^*$ and $b^*$ in order to make color tone measurement. Brushing treatment for colored wood was confirmed as a more economical dyeing method than soaking treatment requiring more time when natural dyeing was done. Furthermore, the desirable tone and shade of color was easily obtained by repetitive brushing treatment using low color tone. During natural dyeing, good color expression was made with high temperature and acidic condition of a dyeing liquor.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.405-420
• /
• 2020

A convergence research was conducted on glass beads excavated at the ruins of Hapgang-ri, Sejong, using the archeology and conservation approach. The period of appearance of Jugu Towangmyo in the ruins of Hapgang-ri can be estimated to begin in the late 2^nd century; for Jugu Towangmyo No. 15, the period spans from the late 2^nd to early 3^rd century. Form, color, and manufacturing techniques of complete glass beads were examined, and the cross-sections and chemical composition of 16 samples were observed. Based on these analyses, the glass beads were divided into blue, purple, and red colors. The blue-colored beads could be further sub-divided based on their gloss and brightness; in contrast, the red-colored beads were highly uniform with regard to these parameters. Based on the stripe and bubble arrangement on the surface of the glass beads, their drawing technique was identified. Traces of heat treatment or polishing were observed at the ends of the beads. According to their chemical composition, the 16 samples were classified into 3 potash glass and 13 soda glass groups; in the latter, the properties of the stabilizers were divided according to the blue and red bead colors. The stabilizers of the red beads are unique in that they allow the distinction among beads excavated in other areas in South Korea owing to their compositional differences. Colorants in blue- and red-colored beads are cobalt (containing MnO), and copper and iron, respectively.

• Journal of dental hygiene science
• /
• v.6 no.3
• /
• pp.153-158
• /
• 2006

Bleaching of vital and nonvital teeth is becoming a more commonly used treatment in the dental office and at home. To improve appearance and remove discoloration, the teeth of specific patients are treated with a variety of bleaching agents. The typical bleaching agents contains carbamide or hydrogen peroxide as the active component. The purpose of the review article was to summarize and discuss the available information concerning the effect of peroxide releasing bleaching agent on dental restorative materials and restorations. Information from all original scientific full papers or reviews listed in PubMed or ISI Web Science were included in the review. Bleaching may exert a negative influence on restorations and restorative materials. Advice is provided based on the current literature to minimize the impact of bleaching treatment on restorative materials and restorations.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2015

This study was conducted in three years (7-9 years after planting) to investigate vegetative growth, yield, fruit quality, and return bloom for optimum crop load based on different planting densities of adult 'Fuji'/M.9 apple trees. As plant materials, 'Fuji'/M.9 apple trees planted at $3.5{\times}1.5m$ (190 trees per 10 a), $3.5{\times}1.2m$ (238 trees per 10 a), and $3.2{\times}1.2m$ (260 trees per 10 a) spacing and trained as slender spindles were used. The crop load was assigned to five different object ranges as follows: 55-64, 65-74, 75-84, 85-94, and 95-104 fruit per tree. TCA increment, total shoot growth, return bloom, yield per tree, and yield efficiency tended to increase as planting density decreased, and fruit weight and soluble solid content tended to increase as the object range of crop load decreased. Fruit red color tended to increase as shoot growth decreased. For apple trees planted with 238 trees and 260 trees per 10a, biennial bearing occurred when the crop load was over 85-94 and 75-84 fruits, respectively. However, biennial bearing did not occur when the crop load was 95-104 fruits in apple trees planted with 190 trees per 10a. Accumulated yield tended to increase as planting density and crop load increased, but that of biennial bearing did not show such a difference. Based on our results, optimum crop load recommendations are to set 95-104 fruits per tree in 'Fuji'/M.9 mature apple trees planted at 190 trees per 10a, 75-84 fruits per tree at 238 trees per 10a, and 65-74 fruits per tree at 260 trees per 10a.