• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.485-492
• /
• 2021

Vision-based autonomous precision landing technology for UAVs requires precise position estimation and landing guidance technology. Also, for safe landing, it must be designed to determine the safety of the landing point against ground obstacles and to guide the landing only when the safety is ensured. In this paper, we proposes vision-based navigation, and algorithms for determining the safety of landing point to perform autonomous precision landings. To perform vision-based navigation, CNN technology is used to detect landing pad and the detection information is used to derive an integrated navigation solution. In addition, design and apply Kalman filters to improve position estimation performance. In order to determine the safety of the landing point, we perform the obstacle detection and position estimation in the same manner, and estimate the speed of the obstacle using LSM. The collision or not with the obstacle is determined based on the CPA calculated by using the estimated state of the obstacle. Finally, we perform flight test to verify the proposed algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.647-661
• /
• 2017

This paper presents a robust method for autonomously landing on small bodies. Autonomous landing is accomplished by generating and following reference position and attitude profiles. The position and attitude tracking controllers are based on discrete sliding mode control, which explicitly treats the discrete and impulsive natures of thruster operation. Vision-based inertial navigation is used for autonomous navigation for landing. Numerical simulation is carried out to evaluate the performance of the proposed method in a realistic situation with environmental uncertainties.

• The Journal of Aerospace Industry
• /
• s.65
• /
• pp.89-106
• /
• 2003

항공기의 자동 착륙 알고리즘을 위한 고 정밀 유도방식에 IBLS(Integrity Beacons Landing System)나 MLS(Microwave Landing System)와 같은 유도 제어 방식을 사용하여 유인 항공기나 무인 항공기의 유도 착륙에 사용하고 있다. 당 연구에서는 무인항공기의 자동 착륙을 위한 실제적인 요구사항들이 분석되었고, 자동 착륙 유도장치로 IBLS와 MLS가 선택되어 각각의 기능과 특성들이 수학적으로 모델링 되었다. 또한 고전제어와 최적제어의 2가지 방식으로 무인항공기의 자동 착륙을 통제하기 위한 autopilot이 설계되어 그 유효성과 특징들이 분석되었다. IBLS, MLS, autopilot, 그리고 이러한 자동 착륙 유도제어 시스템이 적용되는 대상체인 무인항공기와 대기환경 및 외란에 대한 수학적 모델들은 Simulink와 ANSI C를 사용하여 단위 S/W 모듈들로 작성되었고, 여기에 GUI모듈이 추가되어 하나의 통합 시뮬레이션 S/W가 완성되었다. 모의시험평가는 총 2단계로 구성되었는데, 대기 외란이 주어졌을 때 IBLS와 MLS의 유효성을 1차적으로 검증하였고, 2단계 모의수치실험에서는 MLS 유도센서 방식에 따른 고전제어기 및 최적제어기의 항공기 종 방향 운동에 대한 강인성 비교를 시도하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.62-76
• /
• 2010

In this paper, recent researches about the unmanned lunar lander development are studied. Objectives of this study are to derive research trends and to identify key design activities especially in early design phase of unmanned lunar lander. Case study covers SELENE-2 of Japan, LEDA and MoonNEXT of ESA, and small and modular spacecraft approach of NASA. Lunar lander concepts proposed for the International Lunar Network Anchor Nodes are also studied. For each lunar lander program, mission requirements are summarized and mission design results are reviewed. Approaches of safe lunar landing including design of navigation, guidance and control, combination of sensors, derived sensor and propulsion performance requirements are also analyzed.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.191-196
• /
• 2004

Most of studies for landing gear have been performed to analyze the shock absorbing characteristics of oleo-pneumatic struts. But it is not easy to solve the dynamic specific properties of spring type composite landing gear using a present method. The shock absorbing abilities of oleo-pneumatic landing gear strut are under influence of the internal design method on the strut rather than the landing gear structure itself. Unlike oleo type, spring type composite strut absorbs the shock with structural strength and dynamic characteristics of the strut's material and shape. The tests and analysis for the shock absorbing rate and dynamic behavior of the spring type composite fixed landing gear for 4 seats small aircraft, have been performed using landing gear drop test rig.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1184-1194
• /
• 2010

The descent and ascent phases for a lunar lander are composed of several phases. Accordingly, the constraints and control values adequate for each phase are required in order to generate optimal lander's trajectory. The optimal trajectories for descent and ascent phases are generated by the cost function to minimize fuel consumption & attitude variation rates. In this paper, the optimal control problem to make trajectory uses Gauss pseudo-spectral method which is one of the direct approach method. This problem generates lander's reference trajectory, states and controls.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.601-607
• /
• 2012

The main function of a landing gear is to absorb the impact energy during touchdown. It it occasionally required for landing gear to have crashworthiness for improving survivability and safety in case of emergency landing. This paper introduces the design concept, performance analysis and drop test procedures for the development of the crashworthy landing gear. The shock absorbing ability and the crash behavior are proved by analyzing various sensor data and video clips from high speed camera recording during drop tests.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.15-18
• /
• 2023

UAV는 군사용을 처음 시작으로 근래에 취미용 드론의 급격한 성장과 더불어 최근 기후변화, 교통혼잡, 범죄 예방 등 여러 사회 문제 해결을 위한 드론의 필요성이 증가함에 따라 건설, 교통, 농업, 에너지, 엔터테인먼트 등 다양한 산업과 여러 사회 서비스로 그 필요성이 확대되고 있다. 본 연구는 이러한 사회적 흐름에 따라 인공지능 기술을 통한 드론의 활용성을 확대하고 GPS 수신이 안 되는 환경에서 딥러닝 객체 탐지 모델을 활용한 자율 착륙을 연구를 목표로 한다. GPS 신호는 실내와 같은 환경 혹은 지하, 교량 아래, 산속 등과 같은 곳에서는 수신이 어렵다. 이를 극복하고자 GPS 신호수신이 어려운 지역에서 GPS 수신기를 통해 받는 위치 정보 대신 드론에 장착된 카메라를 통해 전달받는 영상에서 착륙할 지점을 인식하고 카메라를 통해 받는 영상 정보만 이용하여 목표지점으로 하강하는 방식으로 자율 착륙을 유도한다. 딥러닝 중 경량화 모델을 활용하여 소형 드론에서 실시간으로 착륙 지점을 감지하기 위해 최적화 과정을 진행해 실시간 자율 착륙이 가능하게 하였다. 본 연구를 통해 드론의 착륙에 있어 GPS 수신기와 사람의 조종에 대한 의존도를 낮출 수 있을 것으로 기대한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.346-351
• /
• 2008

In this paper, the semi-active control of a helicopter landing gear using magneto -rheological(MR) damper is studied. A dynamic model of the MR damper is formulated by incorporating magnetic field-dependent Bingham properties of the MR fluid. The electromagnet of the MR damper is designed and its magnetic field is analyzed using a commercial finite element code. The damping characteristics of MR damper by changing the intensity of the magnetic field are investigated and the dynamic responses of the helicopter landing gear with MR damper are simulated. The semi-active control of the helicopter landing gear is simulated by implementing a sky-kook control algorithm and its performance is evaluated comparing to the passive control.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.734-745
• /
• 2017

The navigation system of lunar lander are composed of various navigation sensors which have a complementary characteristics such as inertial measurement unit, star tracker, altimeter, velocimeter, and camera for terrain relative navigation to achieve the precision and autonomous navigation capability. The required performance of sensors has to be determined according to the landing scenario and mission requirement. In this paper, the specifications of navigation sensors are investigated through covariance analysis. The reference error model with 77 state vector and measurement model are derived for covariance analysis. The mission requirement is categorized as precision exploration with 90m($3{\sigma}$ ) landing accuracy and area exploration with 6km($3{\sigma}$ ), and the landing scenario is divided into PDI(Powered descent initiation) and DOI(Deorbit initiation) scenario according to the beginning of autonomous navigation. The required specifications of the navigation sensors are derived by analyzing the performance according to the sensor combination and landing scenario.