• Composites Research
• /
• v.28 no.6
• /
• pp.333-339
• /
• 2015

Electromagnetic interference shielding composite with low density ($1.18g/cm^3$) was fabricated using electroless plated FeCo magnetic metal hollow fibers and ethylene propylene diene monomer (EPDM) polymer. Aspect ratio of the fibers were controlled and their hollow structure was obtained by heat treatment process. The FeCo hollow fibers were then mixed with EPDM to manufacture the composite. The higher aspect ratio of the magnetic metal hollow fibers resulted in high electromagnetic interference shielding effectiveness (30 dB) of the composite due to its low sheet resistance (30 ohm/sq). The enhanced electromagnetic interference shielding effectiveness was mainly attributed to the formation of conducting network over the percolation threshold by high aspect ratio of fibers as well as an increase of the reflection loss by impedance mismatch owing to low sheet resistance, absorption loss, and multiple internal reflections loss.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.31-39
• /
• 1994

The electromagnetic shielding effectiveness of the various composite materials in the far field region is investigated using the flanged coaxial transmission line sample holder. From these results, we can determine the preference ranking of the various composite materials to use the housing materials of electronic products. These materials have different shielding performances in proportion to the types and volume fractions of metallic powders and metallic fibers included in composite materials. Therefore deter- mination of the optimum volume fraction and the choice of the suitable filler are very important in the design of shielding composites.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.697-704
• /
• 2021

It is hard to get Filaments which are materials of the 3D printing Fused Deposition Modeling(FDM) method as radiation shielding in Korea. and also related research is insufficient. This study aims to provide basic data for the development of radiation shields using 3D printing by evaluating the physical properties and radiation shielding capabilities of filaments containing metal particles. after selecting five metal filaments containing metal particle reinforcement materials, the radiation shielding rate was calculated according to the Korean Industrial Standard's protective equipment test method to evaluate physical properties such as tensile strength, density, X-ray Diffraction(XRD), and weight measurement using ASTM's evaluation method. In the tensile strength evaluation, PLA + SS was the highest, ABS + W was the lowest, and ABS + W is 3.13 g/cm³ which value was the highest among the composite filaments in the density evaluation. As a result of the XRD, it may be confirmed that the XRD peak pattern of the particles on the surface of the specimen coincides with the pattern of each particle reinforcing material powder metal, and thus it was confirmed that the printed specimen contained powder metal. The shielding effect for each 3D printed composite filament was found to have a high shielding rate in proportion to the effective atomic number and density in the order of ABS + W, ABS + Bi, PLA+SS, PLA + Cu, and PLA + Al. In this study, it was confirmed that the metal particle composite filament containing metal powder as a reinforcing material has radiation shielding ability, and the possibility of using a radiation shielding filament in the future.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.399-399
• /
• 1999

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.65-66
• /
• 2011

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.109-112
• /
• 2007

The possibility and limitation of one dimensional nano scale electron shielder is briefly discussed. A Nano scale electron shielder will reduce the weight and size of shielding materials. However, practical application still requires further research. In this work, we discuss general problems related to nano scale electron shielder, by taking an arbitrary one dimensional potential barrier as an example.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1549-1550
• /
• 2015

본 논문에서는 초전도 공진 코일의 차폐 소재 위치에 따른 무선전력전송 특성을 분석하였다. 차폐 소재는 송신 코일로부터 3cm, 8cm, 18cm, 28cm 간격을 두었다. 차폐 소재로는 알루미늄과 플라스틱을 적용하였다. 그 다음 Network Analyzer를 이용하여 S-parameter($S_{11}$)를 분석하였다. 그 결과, 알루미늄 차폐 소재를 5cm 간격을 두어 적용하였을 때 반사계수가 가장 높았다. 하지만 플라스틱 차폐소재에서는 어떤 위치에서도 비슷한 반사계수를 나타냄을 확인하였다.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.233-240
• /
• 2022

Research on the presence or absence of radiation shielding for FDM-type filaments has recently begun to be studied, but filaments with shielding capabilities are not sold in Korea, and not studies yet. Therefore, in this research, we will use HDPE (High Density Polyethylene) as a base material, select bismuth as a reinforcing material to manufacture a composite filament, evaluate the shielding ability, and provide basic data for the development of a radiation shielding composite material using 3D printing.A filament is produced by mixing Bismuth with an effective atomic number 83 with HDPE of PE series and adjusting the content of Bismuth to 20% wt, 30% wt, 40% wt. Compounded filaments were evaluated for their physical properties and shielding capabilities by ASTM evaluation methods. As the bismuth content increases, the density, weight, and tensile strength increase, and the shielding capacity is confirmed to be excellent. As a result of the radiation shielding capacity evaluation, it was confirmed that HDPE (80%) + Bi (20%) showed a shielding rate of 82% at 60 kV and a shielding rate of up to 94% or more at 40% bismuth content. In this study, we confirmed that it was possible to produce a radiation shield that is lighter than the metal particle-containing filaments. Furthermore, that have been shield radiation by using HDPE + Bi filaments, and radiation in the medical and radiation industries. The possibility of using it as a shielding complex was confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.67-76
• /
• 2020

The purpose of this study was to derive the directionality of technology development of high-power electromagnetic pulse (EMP) shielding concrete and standardization of a shielding performance evaluation method. Because the EMP shielding mechanism of concrete has not been identified clearly, and the verification method for EMP shielding performance has not been standardized, it is difficult to compare the research results between researchers. The development direction of EMP shielding concrete was derived from a consideration of the electromagnetic wave loss mechanism of metal. The standardization direction for verifying the EMP shielding performance of concrete was derived from a consideration of the electrical properties of concrete and the shielding performance evaluation methods of previous studies. As a result, the development of electrically conductive concrete is required, and test methods classified by the electromagnetic wave loss mechanism should be applied. For quality verification, the development of EMP shielding concrete will be feasible and its performance can be evaluated if a test method referencing the generalized shielding evaluation method (MIL-STD, etc.) is applied.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.477-478
• /
• 2011