• The Journal of the Acoustical Society of Korea
• /
• 제43권5호
• /
• pp.475-483
• /
• 2024

This paper examines the signal processing parameters of the field differencing method, a technique for estimating the source velocity or distance using a single receiver. The constraints that must be obeyed during the application of the field differencing method and the effect of the parameters on the velocity estimation performance were analyzed. Several cases identified in this study using the SWellEX-96 experiment data show that when applying the sound field differential technique, large errors may occur in the radial source velocity estimation results depending on parameter settings. The study confirmed that the influence of the processing parameters can vary depending on the signal frequency, and presented guidelines for selecting parameter values of the field differencing method for correct radial velocity estimation.

• 한국사회정책
• /
• 제23권1호
• /
• pp.25-59
• /
• 2016

This paper analyses the policy effect of minimum housing standards, using the fact that Seoul set the minimum housing standards in 1998. Because the whole country except Seoul did not set the minimum housing standards in 1998, we could find this situation as a quasi-experiment. In order to identify the policy effect of minimum housing standards, I compare decreasing amounts in the number of households below the threshold between Seoul and comparison regions from 1995 to 2000, using Differences-in-Differences method. I draw estimate of one-to-one comparison, using Gyeonggi province as a comparison region, and OLS estimate, utilizing the whole nation except Seoul as a comparison region, respectively, and compare two estimates. The former and the latter suggest that the setting of Seoul minimum housing standard in 1998 account for decreasing the number of households under the minimum housing standard, by about 216,638 and 325,149, respectively. The latter is statistically significant at the 0.001 level and the former is in the 95% confidence level of the latter. Therefore we could conclude that the setting of minimum housing standards contributes significantly to achieve the policy objectives, a decrease in the number of households, which are below the threshold.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제15권3호
• /
• pp.190-195
• /
• 2003

For many coastal problems, such as wave transformation, tidal circulation, sediment transports and diffusion phenomena, we resort to numerical techniques. The representative numerical techniques are the method of finite differences and finite elements. The approximate algebraic equations, referred to as finite difference equations(FDEs), are subsequently solved at discrete grid points within the domain of interests. Therefore, a set of grid points within the domain, as well as the boundaries of the domain, must be specified. The generation of grids for FDEs, with uniform spacing, is very simple compared to that of finite elements. However, within a very complex domain, there are few grid generation tools we can use conveniently. Unfortunately, most of the commercial grid generation programs are developed only for finite element method. In this paper, grid generation method using digitizer, with uniform rectangular spacing, are introduced in detail. Didger and Surfer programs by Golden Software are necessary to produce comparatively accurate and simple depth data.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.57-57
• /
• 2011

지진해일은 진행속도가 빠르고 파장이 길며 파형의 변화 없이 먼 거리를 진행 할 수 있어 주변지역은 물론 멀리 떨어진 지역에도 심한 범람피해를 야기시킨다. 지진해일의 일반적인 특징으로 장파와 단파가 합성되어 있고 먼 거리를 전파할 경우 분산효과의 역할이 중요하게 된다. 특히 우리나라의 동해안에 영향을 주는 지진해일은 단주기파 성분이 강하고 파장에 비해 먼 거리를 전파하기에 분산을 고려하는 선형 Boussinesq 방정식을 지배방정식으로 사용하는 것이 바람직하다. 하지만 지금까지의 지진해일 전파모의를 위한 모형은 선형 Boussinesq 방정식의 복잡한 계산과 계산시간이 길다는 단점 때문에 선형 천수방정식을 지배방정식으로 사용하고 분산효과는 수치분산을 이용하여 고려해왔다. 지진해일 해석 시 일반적으로 사용되어 오던 기존의 leap-frog 유한차분 모형(Imamura et al., 1988; 조용식, 1996)은 지배방정식으로 선형 천수방정식을 사용하고 파의 분산효과는 수치분산을 이용하여 고려하므로 정해진 시간 간격에 대해 수심에 따라 격자 간격을 적절히 선택해야 하는데 수심이 복잡하게 변하는 경우 격자간격 조정이 불가능하여 분산효과를 정도 높게 고려할 수 없다. 이 문제점을 해결하기 위하여 윤성범 등(2004)은 파동방정식의 인위적인 분산항을 이용하여 Boussinesq 방정식의 분산효과를 고려할 수 있는 능동적인 분산보정기법을 제안하였고 Cho et al.(2007)는 일정한 수심에서 수치적인 분산오차가 Boussinesq 방정식의 물리적인 분산항을 대체하도록 수심, 격자 간격 및 계산 시간 간격 사이의 관계식을 유도하고 Boussinesq 방정식의 분산항과 일치하는 수치분산을 이용하여 실용적인 분산보정기법을 개발하였다. 이에 Ahn(2010)은 현재 컴퓨터의 계산 능력이 향상되어 선형 Boussinesq 방정식을 직접 차분하여 계산하는데 무리가 없다고 판단하여 선형 Boussinesq 방정식을 직접 차분한 모형을 개발하였다. 본 연구에서는 기존의 원해 지진해일 전파모의에 이용되어왔던 선형 천수방정식에 수치분산을 고려한 모형 대신 선형 Boussinesq 방정식의 유한차분 모형을 제안하였으며 기존의 선형 Boussinesq 방정식 모형의 격자와 수심간의 제약을 없애기 위해 차분 기법을 달리 한 2차 정확도의 유한차분 모형을 제안하였다. 검증을 위하여 선형 Boussinesq 방정식의 해석해(Carrier, 1991)와 비교하였다.

• Journal of Advanced Navigation Technology
• /
• 제21권6호
• /
• pp.601-607
• /
• 2017

This study performed fault test on global positoining system (GPS) carrier phase measurements, which is a preprocessing step to generate the positioning correction information based on the global navigation satellite system (GNSS) infrastructure. The existing carrier acceleration ramp step test (CARST) method affects the test result by using the mean value to eliminate the receiver clock error. In this regard, this study applied differencing and compared its results with those of the existing CARST. The fault simulation that applied artificial faults to the actual data found that the fault could be detected independently on each satellite when difference method was applied, and the single difference CARST and the double difference CARST produced similar results. The comparison with the existing method using actual data demonstrated the strengths and weaknesses of satellite and station single difference. Nevertheless, it is our understanding that it would require an additional analysis to determine whether the results were affected by the satellite or receiver clock error.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제30권1호
• /
• pp.141-156
• /
• 2020

Differential privacy, which used to collect and analysis data and preserve data privacy, has been applied widely in data privacy preserving data application. Local differential privacy algorithm which is the local model of differential privacy is used to user who add noise to his data himself with randomized response by self and release his own data. So, user can be preserved his data privacy and data analyst can make a statistical useful data by collected many data. Local differential privacy method has been used by global companies which are Google, Apple and Microsoft to collect and analyze data from users. In this paper, we compare and analyze the local differential privacy methods which used in practically. And then, we study applicability that applying the local differential privacy method in survey or opinion poll scenario in practically.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제20권6호
• /
• pp.779-787
• /
• 2007

This paper presents a highly efficient moving least squares finite difference method (MLS FDM) for a heat transfer problem of bi-material with interfacial boundary. The MLS FDM directly discretizes governing differential equations based on a node set without a grid structure. In the method, difference equations are constructed by the Taylor polynomial expanded by moving least squares method. The wedge function is designed on the concept of hyperplane function and is embedded in the derivative approximation formula on the moving least squares sense. Thus interfacial singular behavior like normal derivative jump is naturally modeled and the merit of MLS FDM in fast derivative computation is assured. Numerical experiments for heat transfer problem of bi-material with different heat conductivities show that the developed method achieves high efficiency as well as good accuracy in interface problems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제31권6호
• /
• pp.331-337
• /
• 2018

This paper presents dynamic algorithm of the MLS(moving least squares) difference method using first order differential Approximation. The governing equations are only discretized by the first order MLS derivative approximation. The system equation consists of an assembly of the approximate function, so the shape of system equation is similar to FEM(finite element method). The CDM(central difference method) is used for time integration of dynamic equilibrium equation. The natural frequency analyses of the MLS difference method and FEM are performed, and two analysis results are compared. Also, the accuracy of the proposed numerical method is verified by displaying the dynamic analysis results together with the results by the existing second order differential approximation. In the process of assembling the first order MLS derivative approximation, the oscillation error was suppressed and the stress distribution was interpreted as relatively uniform.

• The Korean Journal of Applied Statistics
• /
• 제33권6호
• /
• pp.723-738
• /
• 2020

In this paper, we study a method to discriminate between trend stationary and difference stationary processes. Since a crucial ingredient of this discrimination is to determine the existence of unit root, we can use a unit root testing strategy. So, we introduce a discrimination based on unit root testing and propose the method using the adaptive lasso. Our Monte Carlo simulation experiments show that the adaptive lasso improves the discrimination accuracy when the process is trend stationary, but has lower accuracy than unit root strategy where the process is difference stationary.

• Proceedings of the KSEEG Conference
• /
• 대한자원환경지질학회 2002년도 춘계 공동학술발표회
• /
• pp.150-152
• /
• 2002