• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.1128-1133
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.1007-1008
• /
• 2008

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.641-644
• /
• 2003

The running safety of the rolling stock depends on the design characteristics and the contact condition between wheel and railway. In this study, it is analyzed how equivalent conicity of wheel tread or its characteristics has influence on the running safety.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.934-939
• /
• 2004

Railway wheel/rail contact conditions have an influence on dynamic behavior of rolling stock. If there are problems of incompatibility between wheel and rail, damages like wheel wear, wheel spalling, rail wear, etc are occurred. Especially wheel and rail profiles are important factor of vehicle curving performance, so compatibility study between wheel and rail has to be carried out preferentially, In this study, we have analyzed the compatibility between wheel and rail of KNR conventional line to improve the maintenance efficiency of wheel and rail. Thus we showed the results relating to wheel/rail geometric contact, vehicle running performances as the change of wheel/rail combination.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.543-549
• /
• 2012

본 연구는 차세대 분산형 고속전철 시제차량(HEMU-430X)의 후미진동저감에 관한것이다. VAMPIRE 해석을 통한 주행거동 관찰에서 HEMU-430X는 전두부 유선형 형상유지를 위하여 설치된 한방향 요댐퍼 때문에 후미차량에서 횡방향 진동이 예상되었으며, 430km/h에서 기준치를 초과하는 경우가 있었다. 이 후미진동을 감소시키기 위하여 차륜답면 형상변경, 횡댐퍼 댐핑계수조정, 요댐퍼 계수조정 등 다양한 방법을 시도하였으나 후미진동이 없어지지 않았다. 최종적으로 요댐퍼를 양방향으로 바꾸었을 때 횡방향 진동이 사라졌다. 실제 시운전에서는 150km/h로 주행하였을 때 횡방향 후미진동이 나타났으며, 요댐퍼를 양방향으로 바꾸어 300km/h 주행 시에도 후미진동이 나타나지 않았다. 추후 430km/h까지 최고속도시험을 수행할 예정인데 높은 속도에서 후미진동이 다시 발생한다면 본 연구에서 제시한 차륜답면 형상변화, 횡댐퍼 계수 조정 등의 방법을 이용해서 진동을 저감시킬 수 있을 것이다.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.565-575
• /
• 2016

철도차량 영업 운행 중 빈번히 발생하는 차륜 마모, 손상 등의 결함을 제거하기 위하여 실시되는 차륜 전삭 공정과 관련하여 전삭 전후의 차량 동적성능을 분석하였다. 전동차를 대상으로 차륜 전삭 전후의 차륜답면형상을 계측, 분석하였으며 진동 및 승차감 특성을 분석하고자 차량 주행시험을 실시하였다. 시험결과, 차륜 전삭 후 차량 진동 RMS값은 전삭 전에 비하여 저감되었으며 철도차량 기술기준에 의거 분석한 차체 진동성능은 전삭 전에 비하여 개선되었다. 승차감레벨은 전삭 전에 비하여 전삭 후 좌우, 상하방향 모두 최대 약 3dB의 개선 효과를 보였으며 주행안전성 또한 개선됨을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.664-669
• /
• 2004

In rolling stock, wheels are one of the most important components to run on the track in safety. Especially, it is important that wheel profile cause the variation of dynamic characteristics and running safety. The purpose of this paper is to propose the wheel profile and to know the effectiveness of improved wheel profile by using microphones. We also performed analysis of running safety to know application of improved wheel profile before the test. In result, the improved wheel profile was stable in running safety and noise level was reduced.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.663-667
• /
• 2003

Mechanical force acted on the rail wheel causes excessive wear and increases the maintenance cost. The present paper proposes newly designed wheel profiles in order to reduce the contact stress. Numerical analysis on the stress distribution of wheel-rail contact stress is carried out using ABAQUS, a commercial finite element code. The result of KNR1/40 conical wheel is compared to those of the proposed wheels, all of which are arc wheel profile type.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.730-733
• /
• 2003

In this study, it have been measured the vertical and lateral vibrations of car bodies which have an equivalent conicity of 1/20 and 1/40. Based on the measured data, it is revealed that the wheel, XP-50, which has the equivalent conicity of 1/20 causes the better riding comfort of KTX.