• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2069-2074
• /
• 2013

The use of the electromagnetic clutch water pump for internal combustion engine vehicles saves fuel and leads to a reduction in emissions. The clutch water pump allows the engine cooling system to select the optimum operation condition by using coolant flow rate on/off control. This study investigated the characteristics of fuel consumption and emissions of the diesel engine cooling system using the clutch water pump. The electromagnetic clutch operation reduced by about 49% of engine warm up period at idle condition and controlled the optimum high coolant temperature at driving condition. Therefore, fuel consumption was enhanced by about 5%, and emissions such as HC, CO and $CO_2$ were also reduced to a certain degree even though NOx increased a little bit, compared to those of the conventional water pump under NEDC mode which represents the real driving pattern.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.208-214
• /
• 2008

With the development of the automobile industry, technologies for parts of an automobile with more convenient functions have progressed, but the manual clutch developed at the first phase of inventing means of transport still remains at the early stage of the automatic transmission despite numerous research and efforts. The traditional automatic transmission is mainly used in small cars and personal RV vehicles that include the slipped clutch disk. However, this research seeks an innovative technology that can be applied to all types of transportation operating the clutch, such as small cars, large vehicles, farm machines and vessels. In order to accurately decide the joint timing of the clutch disk according to the output of engine power that differs depending on driving conditions of vehicles, and to apply the half clutch state which frequently occurs in the manual transmission, the rpm of the engine can be used as the base to decide the joint timing of the clutch disk. This research has developed an electronic clutch module that can transmit the engine power by moving and jointing the clutch disk as much as the engine rpm increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.29-34
• /
• 2019

In this study, a gasoline test vehicle was evaluated for drive quality in emissions and fuel economy tests. The measurement results were compared with the manufacturer's suggested values to evaluate whether the tolerance ranges (fuel efficiency -5%, greenhouse gas +5%) were exceeded. We carried out tests with test subjects based on the SAE J2951 evaluation method. The test vehicle was a 2L gasoline vehicle. The drive following performance was found to increase under deliberate driving conditions and decreased in smooth driving conditions. As a result of the analysis of the drive following performance, the closer the value is to 1, the more accurate the driving is. (-) indicates harsh conditions, and (+) indicates gentle conditions. The basic data on the driver following between testers was obtained by analysis of the tests. The fuel efficiency correlation with the drive following performance within the target speed range of the fuel consumption mode. In the future, these measurement results can serve as key data for securing an exhaust gas database and fuel efficiency system for each measurement mode.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.400-408
• /
• 2007

In this paper, development of the 8kW parallel module converter is presented. For a effective configuration of FB-PWM converter, this paper proposes 4-parallel operation of 2 kw-module. FB converter of 2-kW module is controlled by phase shut PWM and in order to achieve ZVZCS, the simple auxiliary circuit is applied in secondary side. In order to achieve ZCS, control logic for auxiliary circuit operation is designed to reset the primary current during free-wheeling period. For output current sharing of 4-modules, the charge control is employed. The charge control logic is designed with phase shift PWM logic. Voltage controller is implemented by using DSP(TMS320LF2406) with A/D conversion data of the output current and voltage of each module. The developed converter is installed in PCU(Power Conditioning Unit) for HSG(High Speed Generator) in a vehicle and health monitoring system is implemented for vehicle operation test. Finally, performance of the developed converter is proved under practical operation of HSG.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.94-102
• /
• 2012

Recently entered into an aging socity as the number of elderly drivers is increasing. Traffic accidents of elderly drivers are caused by driver inattentions such as poor vehicle control due to aging, visual information retrieval problems caused by presbyopia, and objects identifying problems caused by low contrast sensitivity. In this paper, detection method of ROIs on the road is proposed. The proposed method creates the saliency map to detect the candidate ROIs from the input image. And, the input image is segmented to obtain the ROIs boundary. Finally, selective visual attention regions are detected according to the presence or absence of a segmented region with saliency pixels. Experimental results from a variety of outdoor environmental conditions, the proposed method presented a fast object detection and a high detection rate.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.32-38
• /
• 2017

The common rail diesel engine used in this study uses mechanically driven camshaft for the operation of intake and exhaust valves, and the timing of valve opening and closing is fixed according to the operating conditions of the vehicle. However, the electric generator engine operates at a constant speed and partial load. Therefore, in order to optimize the design of common rail diesel engine for power generation, the characteristics of diesel combustion and emissions according to the change of valve timing were examined and calculated in terms of fuel economy. The valve timing of the diesel engine influenced the combustion characteristics by changing the intake and exhaust flow and it was considered that the fuel efficiency of the generator could be improved.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.14-28
• /
• 2018

Thanks to technical improvement on the vehicle to vehicle communication and the intelligent transportation system, gradual introduction of the autonomous vehicles is expected soon in the market. The study analyzes the autonomous vehicles' impacts on the network efficiencies. In order to measure the network efficiencies, the study applies the sequential procedures that combines the microscopic and macroscopic simulations. The microscopic simulation attends to the capacity changes due to the autonomous vehicles' proportions on the roadway while the macroscopic simulation utilizes the simulation results in order to identify the network-wide improvement. As expected, the autonomous vehicles efficiently utilizes the existing capacity of the roadway than the human driving does. Particularly, the maximum capacity improvements are expected by the 190.5% on the expressway. The significant capacity change is observed when the autonomous vehicles' proportions are about 80% or more. These improvements are translated into the macroscopic model, which also yields overall network efficiency improvement by the autonomous vehicles' penetration. However, the study identifies that the market debut of the autonomous vehicles does not promise the free flow condition, which implies the possible needs of the system optimal routing scheme for the era of the autonomous vehicles.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2122-2123
• /
• 2011

대규모 발전단지의 계통연계 및 지역간 전력 융통과 대도시지역의 전력공급원 역할을 담당하기 위해 현재 전국적으로 67개의 345kV 이상 초고압변전소가 운전되고 있고, 향후에도 지속적으로 변전설비가 확충될 예정이다. 초고압 변전소에 필수적으로 설치되는 주변압기, 리액터는 그 용량에 따라 대형 중량물(345kV 변압기 66톤, 리액터 88톤 등)로 제작됨으로써 특수 운반차량을 통해서만 공장에서 현장까지 운반되고 있다. 현행 국내 도로법에서는 운반차량의 축하중이 10톤을 초과하거나 적재물 중량을 포함한 총 중량이 40톤을 초과할 경우 도로(교량)관리청의 허가를 득한 후 운반토록 규정하고 있고, 허가 조건을 맞추기 위해서는 교량보강 등의 공사를 통해 교량에 가해지는 중량을 분산시키거나 별도 우회도로를 설치하고 있다. 교량보강 공사는 교량의 종류에 따라 하부지보, 상부가교, 우회가교, 우회가도 등의 개별공법 또는 복합공사를 시행하고 있으나, 엄청난 토목공사비와 시간이 소요되고 있는 실정이다. 따라서 본 논문에서는 중량물 교량통과를 위해 대규모 토목공사 없이 운반할 수 있는 신기술 장비인 'Crossing Bridge System'에 대한 이론적 내용과 더불어 해당 기술의 특징 및 활용계획에 대해 기술하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.33-38
• /
• 2015

In a V2X convergence service environment, the principal service among infotainment services and driver management services must be supported centering on critical information of the driver, maintenance manager, customer, and anonymous user. Many software applications have considered solutions to be satisfied the specific requirements of driving care programs, and plans. This paper describes data flow diagram of a secure clinic system for driving car diagnosis, which is included in clinic configuration, clinic, clinic page, membership, clinic request processing, driver profile data, clinic membership data, and clinic authentication in the V2X convergence service environment. It is reviewed focusing on security threat issue of ITS diagnostic system such as spoofing, tampering, repudiation, disclosure, denial of service, and privilege out of STRIDE model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.837-839
• /
• 2012

When the for occurred, the driver does not get the vision is has difficult on driving. In this case, the probability of occurrence of accidents are very high level. To reduce accidents, this system provide drivers with the safety of ensure to measures that a service inform current situation. in this paper, the crash occur in fog to prevent accident using vehicle safety system to give a alarm and control. The proposed system is installed on the outside of the vehicle, humidity, and ambient light sensors inside the car from the information collected by the system controller for the detection of fog conditions using video equipment and then finally the fog occurs if you do not get the driver's field of events is causing the system.