• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1916-1932
• /
• 2008

The railway accident is characterized by widespread and great(immerse) damage to our society when an accident occurred even if the probability of a railway accident is low. It is no doubt that the role of a rolling stock driver who are active in the first line of the rail safety driving is the most important to prevent an unexpected railway accident. Before new railway safety law being taken into effect, each railway operating organization had the responsibility of training a rolling stock driver by qualification criteria (the requirements or standards of competency), training period, probation period decided on their own standards. To train drivers driving same locomotive model, each railway operating organization had a variety of standards to draft and train trainees. Consequently, It was considered inefficient way to train and manage rolling stock drivers. However, after implementing the new railway safety law, a new system including training and evaluation process to issue driver's license on the condition that entire requirements are satisfied has been established. To prove the competency of the rolling stock driver objectively, training center and third-party evaluation center are divided individually and assigned by government office. Training center should design the training program to allot theatrical education time for different trainee group and to secure maximum practical training time utilizing simulator system to enhance the rolling stock driver's competency. This study analyzes certain conditions necessary to maximize the effectiveness and practical use of training for aquisition of a driver's license and the problems of the existing rail safety law and the ways to improve them.

• Design Convergence Study
• /
• v.17 no.4
• /
• pp.17-29
• /
• 2018

In the semi-autonomous vehicle, before reaching a fully autonomous driving stage, it is imperative for the system to issue a take-over request(TOR) that asks a driver to operate manually in a specific situation. The purpose of this study is to compare whether head-up display(HUD) is a better human-vehicle interaction than head-down display(HUD) in the event of TOR. Upon recognition of TOR in the experiment with a driving simulator, participants were prompted to switch over to manual driving after performing a secondart task, that is, playing a game, while in auto-driving mode. The results show that HUD is superior to HDD in 'ease of use' and 'satisfaction' although there is no significant difference in reaction time and subjective workload. Therefore, designing secondary tasks through HUD during autonomous driving situation improves the user experience of the TOR function. The implication of this study lies in the establishing an empirical case for setting up UX design guidelines for autonomous driving context.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1233-1238
• /
• 2009

This study's aim was to confirm that pseudoneglect affects visual attention through car laterality, using a driving simulator with either bisection or quadrisection strategies being applied to road usage. On the pencil and paper tests, the left quadrisection and bisection marks deviated significantly to the left. While driving, the car was significantly lateralized to the right of the lane regardless of conditions. However, in terms of relative laterality, the biggest left laterality occurred on roads 1(bisection), while the smallest left laterality occurred on roads 2 (right quadrisection). Thus, the effect of pseudoneglect was demonstrated in both the pencil and paper tests and the driving simulation task. Also, roads 2 and 4, which were driven on the right side of the lane, showed a tendency for drivers to avoid the centerline, as this was the expected cause of right laterality. This study demonstrated that the pseudoneglect phenomenon can occur in a routine driving task.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.55-59
• /
• 2010

Driver distraction is a major cause of traffic accidents in Korea. Various measures are being introduced to detect and warn driver distraction. The objective of this research is to investigate changes in driver's physiological signals due to distraction during driving. Driving simulator experiments have been carried out to investigate discrepancy in EEG signals among normal driving, DMB watching during driving, and cellular phone use during driving. Based on the discrepancy, combination of EEG signals have been identfied as candidate variables for detecting driver distraction. Statistical analysis has been carried out to verify their statistical significance.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.172-178
• /
• 2007

The purpose of Railroad Vehicles License Management in accordance with the Railroad Safety Law is to improve the quality of railroad safety. And the train simulators come into use for training of train operation and testing to issue Railroad Vehicles License. So, It is very important that the simulators for the Railroad Vehicles License Test require to work correctly, to measure driver's operation quality in numerical system and to ensure the justice of license test. In fact, nobody can guarantee that the simulators are feasible performance to use in license test. The simulator for train driver license test can be used effectively for studying of needed performance and quality to test new driver's skill. This study hopefully provides the base for improving the quality of the simulator for train driver's license test and contributes furthermore to improve the simulator development technology and railroad safety.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.424-432
• /
• 2009

This paper discusses about the implementation of a simulator for the Navigation Control System(NCS) of bimodal tram. To operate a NCS of bimodal tram, values of all sorts of sensors installed in bimodal tram should be transmitted to the NCS, and the NCS calculates the measured sensor values to determine traveling direction, traveling speed, current position etc. The implementation of the simulator consists of a device applying driver's input transaction function & virtual sensor program and a sub-rack device that controls communication with the NCS to evaluate navigation control function. The virtual sensor program can create routes (map), traveling profiles & seat information et cetera in order to transmit to the NCS, analyzes driver's input values and NCS output values to create virtual sensor values. The sub-rack device takes charge of communication with the NCS using CAN-OPEN, CAN-J1939, MVP protocols. This paper discusses about the implementation of the simulator and afterwards analyzes and evaluates the NCS simulation results.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.571-580
• /
• 2011

The purpose of this study was to evaluate the effects of secondary task such as sending text message (STM) and searching navigation (SN) using the variable indicating control of vehicle ((Medial-Lateral Coefficient of Variation, MLCV), (Anterior-Posterior Coefficient of Variation, APCV)) and motion signal (Jerk-Cost function, JC). Participants included 50s taxi drivers; 14 males and 14 females. Participants were instructed to keep a certain distance (30m) from the car ahead with constant speed (80km/hr or 100km/hr). Experiement consisted of driving alone for 1minute and driving with secondary task for 1minute. Both MLCV and APCV were significantly increased during Driving + Sending Text Message(STM) and Driving + Searching Navigation(SN) than Driving only. Also, JC was increased during Driving + STM and Driving + SN than Driving only. In this study, we found that even in the experts group who are taxi driver and have 25 years driving experience, the smoothness of motion is decreased and the control of vehicle is disturbed when they were performing secondary tasks like sending text message or searching navigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.430-436
• /
• 2018

Special railway vehicles for track maintenance are equipped with a tamping device that adjusts various track trajectories to reduce the vibration of rolling stock and improve ride quality during trains passing over a track. The development of a simulator that can confirm the error of the actual tamping work is important for reducing human error in the linearization of the track misalignment. In this study, to improve the reality and training effect of conventional 2D simulator, 3D simulator modeling was implemented for tamping work of special railway vehicles in virtual space. The problem of buffering during high screen quality of tamping work was solved using the Unwrap UVW mapping technique of a low polygon extracted from high quality polygon modeling. The human error in the training of the tamping work was detected by the principle of circle and square collision when the tamping tyne and the sleeper collided. In addition, vibration of the driving chair was generated at the same time as the collision, and the number of the sleeper strikes is displayed on the simulator exercise screen. Owing to the scattering of railway ballast protruding from the sleepers, which had a serious effect on the safety of the vehicle, the gravel bouncing effect of the tamping unit was applied.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2017

Since year 2016, in Korea, the police department started to use drones to patrol violated vehicles on the highway area. They monitor vehicle drivers who use side ways on the highway during traffic congested hours of the season, drunken drivers, or violent drivers. They use the 'Spot Mobility' method which floats the drones for 30 minute period. However, this method is inefficient since it requires manually charging batteries, gathering data, and operate drones with many numbers of policeman. Therefore, in this paper, for the efficient patrol in this purpose, I have suggested an effectively manageable network system consists of many drones as the wireless network nodes and with small numbers of policeman in a wide highway area. To accomplish this, the two topologies of effective drone patrol network systems are designed and simulated in OPNET simulator for performance evaluation.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.21-29
• /
• 2019

Take-over requests in semi-autonomous cars must be handled properly in the case of road obstacles or curved roads in order to avoid accidents. In these situations, situation awareness and appropriate decision making are essential for distracted drivers. This study used a driving simulator to investigate the components of auditory-visual information systems that affect safety, workload, and trust. Auditory information consisted of either voice guidance providing situation awareness for the take-over or a beep sound that only alerted the driver. Visual information consisted of either a screen showing how to maneuver the vehicle or only an icon indicating a take-over situation. By providing auditory information that increased situation awareness and visual information that aided decision making, trust and safety increased, while workload decreased. These results suggest that the levels of situation awareness and decision making ability affect trust, safety, and workload for drivers.