• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.458-459
• /
• 2008

이 논문은 자기부상열차 속력에 따른 부상제어기 성능을 분석한다. 현재 실용화 사업은 시속 110km/h 속력으로 부상공극 8 mm 기준으로 상하 3 mm 이하 변화를 목표로 개발 중에 있다. 부상제어기의 안정성에 영향을 미치는 외란으로는 가이드웨어 처짐, 크로스아암에 의한 레일 처짐, 레일 불균일, 레일 연결부 단차 등이 있다. 이러한 외란이 복합적으로 작용하지만, 설계 단계에서 각각의 영향을 단순화하여 독립적으로 그 영향을 분석할 필요가 있다. 본 논문에서는 차량속력에 따른 가이드웨어 처짐이 부상제어기에 미치는 영향을 분석한다. 하나의 전자석과 유연레일을 모델링하고 상태궤환을 갖는 제어기를 제안하여 속력에 따른 부상공극 변화를 관찰한다. 모의시험 결과 12 mm 레일의 휘어짐 상황에서 속력에 따라 부상 공극 변화가 커지지만, 실용화 사업의 목표를 달성함을 알 수 있었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.171-178
• /
• 2021

Caravans are easily affected by external physical factors and often cause dangerous situations for passengers. Therefore, in order to secure the stability of the passenger, there is a need to develop a sway reduction device capable of preventing the sway phenomenon in advance. This paper aims to minimize the hitch angle between the tow vehicle and the caravan. Specifically, the initial instability of the caravan is detected through an IMU sensor mounted on each of the tow vehicle and the caravan, and a control value is calculated to reduce errors from the Hitch angle and Hitch yaw rate using a PID controller. Different braking torques are generated, distributed, and controlled on the left and right brakes of the caravan according to the calculated control value. It could be verified through the driving experiment that the hitch angle was decreased compared to the case where the performance of the sway reduction device was not controlled, and the transverse stability improvement rate was improved by 94.49% compared to before control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.57-62
• /
• 2017

Recently, the use of electronic control units in vehicle has increased. The ECUs are connected to in vehicle networks to process a large amount of information. In this paper, for an actuator that is interconnected to CAN and FlexRay, a FlexRay-CAN gateway is presented and a data packing algorithm with a bisection method of a FlexRay slot is proposed. And, a network based actuator control system and packing map is implemented. With the proposed packing method, contact force sensor data are transferred within the maximum allowed delay to ensure the stability. The proposed method is useful for control of distributed system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1429-1436
• /
• 2013

This study presents an approach for designing a vehicle rollover prevention controller using differential game theory and multi-level programming. The rollover prevention problem can be modeled as a non-cooperative zero-sum two-player differential game. A controller as an equilibrium solution of the differential game guarantees the worst-case performance against every possible steering input. To obtain an equilibrium solution to the differential game with a small amount of computational effort, a multi-level programming approach with a relaxation procedure is used. To cope with the loss of maneuverability caused by the active suspension, an electronic stability program (ESP) is adopted. Through simulations, the proposed method is shown to be effective in obtaining an equilibrium solution of the differential game.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.84-93
• /
• 2004

This study carries out the performance improvement and simplification of hydraulic modulator that plays an important role in vehicle stability control systems. The mathematical models for each component of a modulator, such as pump, wheel cylinder, check and solenoid valve, accumulator, damper are derived in detail. All the mathematical models are combined to form a modulator system and implemented through a computer program, which can be controlled by a user friendly GUI. To verity the simulation, comparison between simulation and experiments has been made. After the verification of the validity of the simulation, the effects of the design parameters of the modulator on the wheel cylinder pressure is investigated. The results show that the modulator without MPA has advantage in early time pressure rise rate, and it can be simplified.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.169-171
• /
• 2020

지구온난화와 같은 환경적 문제점들로 인해 에너지 저감 및 고효율의 기술개발을 통한 탄소 저감이 주목을 받고 있다. 시대적 관심과 요구에 발맞춰 에너지 저감 효과가 있는 영구자석동기 전동기 등의 신기술을 철도차량에 적용하려는 연구가 활발히 진행되고 있다. PMSM을 철도차량에 적용하기 위해 추진제어장치는 인버터 한 대가 한 대의 전동기를 제어하는 1C1M 방식이어야 하며, 유지보수성과 안정성을 확보하기 위해 전동기와 인버터 사이를 전기적으로 분리해줄 수 있는 차단기가 필요하다. 또한 에너지 저감과 고효율을 달성하기 위해서 추진제어장치는 소형, 경량화 구조로 개발 되어야 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1166-1175
• /
• 2021

We investigate the current situation and development trend of domestic smart city and emergency vehicle priority signal control system analyzing the existing effectiveness of 1) emergency vehicle priority signal control system and 2) control emergency vehicle priority signal, based on domestic and foreign prior research for signal control system security. The effectiveness of time reduction was analyzed through actual application and test operation to emergency vehicles after establishing the system. In addition, for security management and stable service of real-time signal system control we propose improvement for the technical control items of the ISMS-P certification system to secure golden time to protect citizens' precious lives and property in case of emergency by classifying and mapping the existing ISMS-P certification system and the Korea Internet & Security Agency's cyber security guide according to the items of security threats.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.156-157
• /
• 2012

본 논문은 불꽃 점화 방식 엔진에서 차량의 주행상태에 따른 점화코일의 전류량을 측정하여 추가적인 전류를 공급하는 충전 전류제어 장치를 고안하였다. 점화 코일의 전류를 안정적으로 공급하고 과전류를 방지함으로써 차량 엔진의 출력 향상 및 효율적인 연소가 가능하도록 하였으며, 다이나모 장비를 이용하여 출력과 토크에 대한 성능평가를 하였다. 실험결과는 제안하는 장치의 유효성을 보여주었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.242-245
• /
• 2017

기존의 엔진제어기(ECU)는 주요 mapping data(ECU에 대응되는 값)들에 대해서 기밀성과 무결성을 제공하는 보호 기법의 부재로 인해 임의적인 튜닝이 가능하다는 특징이 존재하였다. 이로 인해 자칫 잘못된 튜닝이나 악의적인 조작이 발생할 수 있는 여지가 있으며, 이는 차량 엔진 및 조작의 안정성을 떨어뜨림과 동시에 운전자 및 보행자들의 안전을 위협할 수 있다는 문제가 있다. 이에 본 논문에서는 ECU에 적용되는 Firmware의 주요 mapping data를 안전하게 암호화하는 방식을 제안하며, 이 과정에서는 차량의 식별 및 ECU에 mapping 되는 data의 무결성 검증을 위해 인증서를 사용하는 방식을 제안한다. 본 논문의 제안을 통해 주요 mapping data를 안전하게 보호하는 기술을 통해 차량의 안전성을 유지할 수 있다.