• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.499-505
• /
• 2012

TPMS(Tire Pressure Monitoring System) using the wireless communication technique is defined as the safety aid system to efficiently realize and manage the condition of tires in the vehicle. The wireless communication system of TPMS should suffers from various noise and interferences such as signals of each tire sensor or outside electrical equipments. In order to retain the data reliability of TPMS, we propose an assessment method of the data reliability based on signal-to-interference and noise ratio (SINR) of the received signal. The proposed technique can be widely applied to wireless duplex communication systems based on various sensors. We verify critical SINR values to satisfy data reliabilities of 95%, 97%, and 99% through computer simulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.133-140
• /
• 2015

C-ITS is a system that uses bidirectional communication between two vehicles or infrastructures to control traffic more conveniently, and safely. If C-ITS security is not properly prepared, it can cause traffic congestions and fatal traffic accidents, and therefore can affect greatly on the driver's life. This paper proposes the prevention and response mechanisms based on the cyber attack scenarios that can be used to attack C-ITS.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.663-668
• /
• 2012

A TPMS(Tire Pressure Monitoring System) is a wireless communication system designed to monitor the pressure and temperature of pneumatic tires of a vehicle. In order to provide the aid in protecting a driver, this system reports tire pressure information to the driver of the vehicle. Since the wireless communication technique should be employed to transmit the TPMS data from each tire to signal processing unit in the vehicle, it suffers from interference signals from external electrical or electronics equipments. In this paper, we propose the TPMS interference cancellation technique based on GSC(Generalized Sidelobe Canceler), which does not have only the excellent performance like MVDR(Minimum-Variance-Distortionless-Response) but also has the low computational complexity comparing with MVDR. The performance of interference suppression is conformed by computer simulation examples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.180-185
• /
• 2011

The TPMS(Tire Pressure Monitoring System) is an electronic system designed to display the air pressure inside the pneumatic tires and report real-time tire-pressure information to the driver of the vehicle, either via a gange, a pictogram display, or a simple low-pressure warning light. Although the data measured by TPMS sensor is transmitted to internal signal processer in a vehicle through wireless communication, the receiver may suffers from various interferences such as amateur radio station, RFID(Radio-Frequency IDentification) for controlling container, RKE(Remote Keyless Entry) signal, and so on. In this paper, we consider beamforming technology to suppress various high-power interference signals for the TPMS wireless communications. Also, we propose the proper data structure and antenna arrangement for the beamformer inside the vehicle. The performance for the interference suppression is illustrated by computer simulation example.

• Broadcasting and Media Magazine
• /
• v.24 no.1
• /
• pp.63-72
• /
• 2019

고령인구의 증대 및 출생 인구의 감소로 과소지와 대중교통 취약지역이 확산되고 있다. 이러한 인구구조의 변화는 교통약자의 독립적 이동이 더욱 불편해지고, 물류의 수송이 어려워 진다. 한편, 도심은 차량의 포화상태로 대기환경의 질이 나빠지고 도심도로는 주차장으로 변질될 뿐만 아니라, 운전자와 보행자 모두에게 안전의 위협이 되고 있다. 이러한 환경과 이동의 효율성을 극대화 하는 방안으로 친환경자동차와 자율주행기술의 접목이 연구개발 중이다. 자율주행기술은 자율주행차와 도로 인프라에 ICT가 융 복합되어 이동과 수송분야의 새로운 산업과 서비스 창출이 가능하다. 본 고에서는 교통약자의 이동과 물류의 수송을 지원하는 자율주행기술의 개발 동향을 살펴본다. 특히 광화문, K-City 등의 도심 자율주행서비스 테스트 경험을 통해 해결해야 하는 복잡한 도심 주행 환경의 인지와 교차로 및 합류로, 비정형 도로환경에서의 주행협상기술의 필요성을 소개한다. 도심의 주행 환경은 고속도로와 같은 자동차 전용도로와 달리, 신호등과 교차로, 2륜 이동체 및 버스 등이 다양하게 혼재된 것으로 인지 및 판단 기능의 고도화가 적극적으로 요구된다. 그리고, 다양한 자율주행서비스 시장을 확산하기 위해 요구되는 이동하는 공간과 시간을 메꿔 줄 미디어 콘텐츠의 역할에 대해 설명하고자 한다.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.2
• /
• pp.45-56
• /
• 2021

In platoon driving, several autonomous vehicles communicate to exchange information with each other and drive in a single cluster. The platooning technology has various advantages such as increasing road traffic, reducing energy consumption and pollutant emission by driving in short distance between vehicles. However, the short distance makes it more difficult to cope with an emergency accident, and accordingly, it is difficult to ensure the safety of platoon driving, which must be secured. In particular, the unexpected situation, i.e., variability that may appear during driving can adversely affect the safety of platoon driving. Because such variability is difficult to predict and reproduce, preparing safety guards to prevent risks arising from variability is a challenging work. In this paper, we studied a simulation method to avoid the risk due to the variability that may occur while platoon driving. In order to simulate safe platoon driving, we develop diverse scenarios considering the variability, design and apply safety guards to handle the variability, and extends the detail functions of VENTOS, an open source platooning simulator. Based on the simulation results, we have confirmed that the risks caused form the variability can be removed, and safe platoon driving is possible. We believe that our simulation approach will contribute to research and development to ensure safety in platoon driving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.924-933
• /
• 2013

In this paper, we propose a modeling of the broadcasting in the IEEE 802.11p MAC protocol for the VANET(Vehicular Ad hoc Networks). Due to the fact that the beacon message which is needed for the safety services is shared via broadcasting, the analytical modeling of the broadcasting is crucial for the optimum design of the services. Two characteristics specific to the IEEE 802.11p are reflected in the modeling; the time limited CCH interval caused by the channel switching between the CCH and SCH, and no retransmission of the broadcasted messages. In the proposal, we assumed no restriction on the moment of generation of the beacon messages. We allow the messages to be generated and broadcasted within the whole CCH interval. Simulation results prove the accuracy of the proposed modeling. Noticeable improvements are also observed in terms of the performance indices such as the successful delivery ratio, transmission delay, and the variation of the delay.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2011

In this paper, the intelligent smart monitor system is implemented for the next generation vehicle. to mitigate the numerous effects of distractions within the vehicle, it is vital to put critical information where the driver can use it without affection focus on the road ahead. Audible alarms are useful supplements when used in conjunction with visual displays. But driving is an overwhelmingly visual task. To optimize a vehicle's active safety systems, more than just audible alarms are necessary. The driver needs a visual interface that focuses his or her attention on the road ahead. The most commonly viewed information in a vehicle is from the instrument cluster, where speed, tachometer, fuel, engine temperature, fuel gauge, turn indicators and warning lights provide the driver with an array of fundamental information. TFT LCD, LCD Back light led, plane mirror, lens and controllers parts were designed to intelligent integrated smart monitor system. Finally, in this paper, we analyze intelligent integrated smart monitor system for driver safety vehicles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.711-720
• /
• 2012

In this paper, we introduce the implementation of driver fatigue monitering system and its result. Input video device is selected commercially available web-cam camera. Haar transform is used to face detection and adopted illumination normalization is used for arbitrary illumination conditions. Facial image through illumination normalization is extracted using Haar face features easily. Eye candidate area through illumination normalization can be reduced by anthropometric measurement and eye detection is performed by PCA and Circle Mask mixture model. This methods achieve robust eye detection on arbitrary illumination changing conditions. Drowsiness state is determined by the level on illumination normalize eye images by a simple calculation. Our system alarms and operates seatbelt on vibration through controller area network(CAN) when the driver's doze level is detected. Our algorithm is implemented with low computation complexity and high recognition rate. We achieve 97% of correct detection rate through in-car environment experiments.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.209-221
• /
• 1999

In this research, AVL-GIS(Automatic Vehicle Location System linked with Geographic Information System) system was developed using integration of core techniques of GIS engine written by Java language, GOS(Global Positioning System) and wireless telecommunication interfacing techniques. IDGPS(Inverted differential GPS) techniques was employed to estimate accurate position of mobile vehicle and to supervise their path from AVL-GLS control center system. Between mobile vehicle and AVL-GLS control center system which has spatial data analysis function, road network and rleate ddata base were connected wireless phone to communicate for position an dmessage in real time. The developed system from this research has more enhanced GIS functions rather than previous AVL oriented system which has MDT for message display and voice communication only. This system can support build-up application system such as fleet management like bus, taxi, truck, disaster and emergency and monitoring of transportation status for customer s order via web browser in filed of EC/CALS in low cost.