• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1581-1582
• /
• 2013

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.525-526
• /
• 2016

전기자동차 (EV)에서 구동용 모터의 토크 제어를 위한 인버터에는 제어 연산 및 고장 진단 기능을 수행하기 위한 MCU가 있으며, MCU는 상위 제어기 차량 제어 유닛 (VCU)에게 현재 모터 및 인버터의 상태를 주기적으로 전달하고, 현재 차량 주행에 적합한 토크 지령을 받아 토크 제어를 수행하게 된다. 이를 위해 MCU는 전류, 전압 및 위치 센서의 값을 읽어 제어를 수행하게 되며, 제어의 결과 값으로 pulse width modulation (PWM)을 생성하여 이를 통해 모터에 전압을 공급하게 된다. 즉 차량의 구동에 있어 PWM 신호는 가장 중요한 부분이다. 하지만 생산 불량 또는 진동에 의한 납땜 불량 또는 MCU 전원 고장 등으로 MCU에 고장이 발생하게 되면 이상 PWM을 생성하게 되고 정상적인 토크 제어가 불가능해진다. 이때 안전하게 EV를 정지 시키는 알고리즘이 필요하게 되며, 이를 수행 할 supervisor control unit (SCU)가 인버터 컨트롤 보드에 추가되어야 한다. 본 논문에서는 고속으로 주행하던 차량에서 메인 MCU가 고장 날 경우에 안전하게 EV를 정차시키는 방법에 대해 다루었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.641-644
• /
• 2003

텔레매틱스 정보통신 기술은 위성, 무선 정보통신 네트워크와 차량, 도로 네트워크 상에서 휴먼이라는 네트워크간의 새로운 패러다임 관계를 만들었다. 무선음성 데이터 통신과 인공위성을 이용한 위치정보시스템을 기반으로 자동차를 이용해 정보를 주고받을 수 있도록 하는 기술이다. 즉, 위치측정시스템과 무선통신망을 이용해 운전자와 탑승자에게 교통정보, 응급상황에 대한 대처, 원격차량진단, 인터넷 이용 각종 모바일 서비스를 제공할 수 있는 단말기와 운영체제를 말한다. 또한, 디지털 기술의 발전으로 정보기기, 컴퓨터, 가전기기 및 통신기기간의 기술융합이 활성화되면서 이와 관련된 네트워크, 단말기, 소프트웨어 응용 및 서비스 등의 분야에서도 연관 효과가 발생한다. 특히, 고속화와 모바일 환경의 급속한 확대로 운전자는 이동 중에 차량 내에서 모든 업무를 처리할 수 있는 이동 사무실 이라는 새로운 개념의 차량 정보화를 요구할 것이다. 따라서 본 논문에서는 텔레매틱스의 개요, 단말 플렛폼 표준 기술, 다양한 서비스 및 기술동향에 대한 전반적인 내용을 기술함으로써 향후 핵심기술을 도출하고 사업화에 대처하고자 한다.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.81-94
• /
• 2016

The Korean real-time traffic responsive control systems, Cycle Offset Split Model of Seoul (COSMOS), employs a single theoretical model to estimate the degree-of-saturation (DS) on approaches. However, the deployment of the system has been accomplished without practical consideration of its field performance. This paper delivers a diagnosis study performed to find the relationships yet known on the DS values against the operational conditions unproved in theory but ordinarily observed in field practice. Based on the analysis of the historical log data (476,505 cycles) obtained from the COSMOS server, it was found; (1) full coverage of lane detections should perform better than the sample coverage of detection in ordinary conditions, (2) the sample coverage of detection perform better than the other case with an exclusive bus lane, (3) detection in which a shared lane is involved provide poor estimation of DS, (4) poor DS estimation when a detection lane is adjacent to a shared lane, and (5) the DS values obtained during a day can hardly be stable all time. The findings suggest traffic engineers a progressive direction to move forward for the next real-time traffic control systems.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.129-136
• /
• 2005

The vehicle loading test under the strict traffic control is generally carried out as a present practice in an evaluation process of the bearing capacity of a bridge. The quasi-static load test is recently proposed to mitigate the traffic condition of test, and analyze the disturbed acceleration time-history data of free vibration due to the ambient traffic on the bridge by Fourier transform to calculate only the natural frequencies of the bridge. The calculated frequencies have some errors due to the analysis technique as well as the influence of ambient traffic loads, and in addition to it is cumbersome to obtain the free vibration data during a quasi-static load test. In this study, the wavelet transform technique using Morlet wavelet is used to analyze the acceleration data recorded during a quasi-static load test on a bridge and calculate the natural frequencies and the modal damping ratios of the bridge. The study results show that the wavelet transform technique is a reliable and reasonable method to analyze test data and obtain the natural frequencies and the modal damping ratios of a bridge regardless of the data types i.e. free or forced vibrations.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.210-222
• /
• 2017

Railway turnout systems play a key role in railway systems that change train directions. The turnout systems are one of the weakest systems in railway systems, and consecutive maintenance is required. A turnout diagnostic system can automatically measure the turnout status and its deterioration. To diagnose the turnout systems, we follow conventional maintenance procedures and need to identify their physical characteristics to coincide the procedures and the characteristics. According to the physical characteristics, we should choose and install adequate sensors on the turnout systems to measure their physical characteristics. We studied the phenomenon of the turnout system responses for point moving and train running on the turnout systems. We installed sensors on the turnout system in a revenue line to measure the identified physical quantities and to reveal the robustness of the sensors under the turnout system environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.679-686
• /
• 2013

The reduction unit is one of the most important components in railway cars, due to the transmission of torque from the motor to the wheels. Faulty reduction gears in high-speed trains result from excessive wear on the gear or damage to the gear. These types of gear defects have a significant effect on high-speed rail operation and safety; thus, a diagnosis system for the reduction unit is needed. Vibration diagnosis technology is one of the most effective diagnostics. In this paper, the vibration parameters of a reduction unit were evaluated during a driving-gear test and a full-vehicle test, using kurtosis and the crest factor. These tests were performed under normal operating conditions; a specimen tester was used to diagnose problems in defective gears.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.475-478
• /
• 2011

driver for safety always check the status of their vehicle, and it is essential to understand. But if you want to know the status of the driver of the vehicle in specialist referral time and money because it costs the operator shall be paid. Today's rapidly changing IT technology with the development of the various features of your phone to check the status of the vehicle was able to do. However, the car's existing phone system, car diagnostic expertise must be learned because it will reveal the status of the vehicle do not have the expertise to not highlight the need for diagnostic. To reflect these points in smartphone users to easily use their own vehicles at a time to determine the status of a system that is required. In this paper, OBD-II protocol conversion WiFi OBD-II connector, retrieving information from the driver of the vehicle replacement cycle of consumables required vehicle inspection, vehicle problems in real-time diagnostic information to the user ease of use shows the IOS implementation in the automotive supply was implemented based on the smartphone.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.169-174
• /
• 2012

Reduction unit is one of the most important components for railway vehicle because torque of motor must be transmitted to wheels of vehicle by reduction unit. However, According to advanced studies, it has been often broke down due to the damage, fatigue and wear of gear. To solve this problem, defect diagnosis methods of gear have been mainly using the vibration diagnosis technology through vibration waveform and frequency analysis. However, We should know vibration characteristics of normal state reduction unit prior to defect diagnosis. So in this paper, We had analyzed vibration characteristics of reduction unit in order to utilize monitoring system development. Comparison of targets is the vibration characteristics of normal state reduction unit about Electric Multiple Unit(EMU) and the High-speed trains(KTX, KTX II).

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.167-171
• /
• 2007

텔레매틱스 서비스는 크게 주변 지역 관심 정보, 날씨, 근접 정비소, 현금 자동인출기 등의 정보서비스 분야와 교통정보 서비스, 네비게이션 서비스, 응급서비스, 고장 서비스 및 차량수리 및 차량문제에 관한 진단서비스를 중심으로 서비스가 개발되고 있다. 혹은 두 가지 분야가 복합적으로 개발되고 있다. 또한 텔레매틱스 시장은 여러 가지 기술들이 독립적으로 분할되어 다양한 제품으로 정보를 제공하기 보다는 여러 정보 및 기능 등이 텔레매틱스 시스템으로 집중 및 통합되는 형태가 요구된다. 이에 본 논문에서는 차량 장치 정보를 열람하고 제어하기 위한 단말 미들웨어 모델을 제시/구현하고, 단말 미들웨어를 이용하는 텔레매틱스 서비스 배포를 위한 배포 모델을 제시하고자 한다.