• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.18-29
• /
• 2022

Recently, cooperative intelligent transport systems (C-ITS) testbeds have been deployed in great numbers, and advanced autonomous driving research using V2X communication technology has been conducted actively worldwide. In particular, the broadcasting services in their beginning days, giving warning messages, basic safety messages, traffic information, etc., gradually developed into advanced network services, such as platooning, remote driving, and sensor sharing, that need to perform real-time. In addition, technologies improving these advanced network services' throughput and latency are being developed on many fronts to support these services. Notably, this research analyzed the network latency requirements of the advanced network services to develop a remote driving service for the droid type low-speed robot based on the 3GPP C-V2X communication technology. Subsequently, this remote driving service's performance was evaluated using system modeling (that included the operator behavior) and simulation. This evaluation showed that a respective core and access network latency of less than 30 ms was required to meet more than 90 % of the remote driving service's performance requirements under the given test conditions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.559-561
• /
• 2005

CAN(Controller Area Network)은 시스템이 간단하고 저렴하게 구현 할 수 있는 필드버스(Field bus)로써 1980년대 독일의 BOSCH사에 의해 자동차 제어용 네트워크로 개발되었고, 실시간 계측제어 능력이 우수하여 산업전반(산업 자동화, 건을 자동화, 의료 장비, 열차, 중장비 차량)에 사용되고 있다. 본 논문에서는 CAN의 단일 마스터 시스템(Single Master System)에서 마스터 노드에 문제가 발생할 때, 전체 시스템이 다운되는 현상을 악기 위해 마스터 노드를 동적으로 변화시키는 동적 마스터 시스템(Dynamic Master System)을 제안하고 기존의 시스템과 비교하여 시스템의 가용성을 알아보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1377-1380
• /
• 2010

자동차 내부 네트워크 데이터를 이용하는 자동차-IT 융합 기술은 자동차 안전 및 진단, 텔레매틱스, ITS등 새로운 서비스 시장을 형성하며 산업적인 파급 효과가 클 것으로 전망된다. 이러한 자동차 내부 네트워크 데이터 중 가장 최근에 많이 사용되고 있는 것이 CAN(Controller Area Network) 이다. 그리고 현실적으로 자동차 내부의 데이터 중 사용할 수 있는 가장 적절한 데이터가 Diagnostic CAN 데이터이다. 본 논문에서는 자동차-IT 융합 기술에서 사용할 수 있는 CAN 데이터 중에서 진단용 CAN 데이터에 대하여 알아보고 이를 제품개발에서 사용할 수 있도록 하기 위한 데이터를 수집하고 제공하는 방법에 대하여 알아본다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.747-761
• /
• 2024

Recently, modern vehicles have been controlled by Electronic Control Units (ECUs), by which the safety and convenience of drivers are highly improved. It is known that a luxury vehicle has more than 100 ECUs to electronically control its function. However, the modern vehicles are getting targeted by cyber attacks because of this computer-based automotive system. To address the cyber attacks, automotive manufacturers have been developing some methods for securing their vehicles, such as automotive Intrusion Detection System (IDS). This development is only allowed to the automotive manufacturers because they have databases for their in-vehicle network (i.e., DBC Format File) which are highly confidential. This confidentiality poses a significant challenge to external researchers who attempt to conduct automotive security researches. To handle this restricted information, in this paper, we propose a method to partially understand the DBC Format File by analyzing in-vehicle network traffics. Our method is designed to analyze Controller Area Network (CAN) traffics so that checksum signals are identified in CAN Frame Data Field. Also, our method creates a Lookup Set by which a checksum signal is correctly estimated for a given message. We validate our method with the publicly accessible dataset as well as one from a real vehicle.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.436-444
• /
• 2016

The primary windings of the main transformer for rolling stock have several natural frequencies that can occur internal resonance with transient voltages induced on a high voltage feeding line. Factory testing is limited in its ability to determine whether or not transient voltage with various shape and duration can be excitable. This study presents the design of a high voltage windings model and simulation and analysis of the internal resonant characteristics in terms of the initial voltage distribution and voltage-frequency relationship using the electromagnetic transients program (EMTP). Turn-based lumped-parameters are calculated using the geometry data of the transformer. And, sub-models, being grouped into the total number of layers, are composed using a ladder-network model and implemented by the library function of EMTP. Case studies are used to show the layer-based voltage-frequency relationship characteristics according to the frequency sweep and the voltage escalation and distribution aspects in time-domain simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1696-1697
• /
• 2007

한국형 틸팅열차의 시험평가를 실시하기 위한 상시계측시스템은 크게 두 부분으로 이루어져있다. 하드웨어는 센서 계측용 랙, 계측용 콘솔 Desk, 전원공급 랙, 센서부 및 케이블부로 이루어지며, 소프트웨어는 계측프로그램, 후처리 프로그램, 분석 프로그램 등으로 구성되어있다. 이 중에서 차량 네트워크 신호를 입력받기 위한 TMS 신호 검지시스템은 기존에 개발되어 운용중인 타 시스템과 구별되는 틸팅열차 종합계측시스템만의 장점이라고 할 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.119-133
• /
• 2022

Due to the improvement of surveying, mapping and communication techniques, various apps for road direction guides and vehicle navigations have been developed. Although such a development has impacted on walking and driving, there is a limit to improving the daily convenience of the socially impaired people. This is mainly due to the fact that the software have been developed for normal pedestrians and drivers. Therefore, visually impaired people still have problems with the confusion of direction and/or non-provision of risk factors in walking. This study aimed to propose a scheme which constructs data for mobility-impaired or traffic-impaired people based on various geospatial information. The factors and components related to walking for the visually impaired are selected by geospatial data and a walking route guidance network that can be applied to a commercial software. As a result, it was confirmed that road direction guidance would be possible if additional contents, such as braille blocks (dotted/linear), sound signals, bus stops, and bollards are secured. In addition, an initial version of the application software was implemented based on the suggested data model and its usefulness was evaluated to a visually impaired person. To advance the stability of the service in walking for the visually impaired people, various geospatial data obtained by multiple institutes are necessary to be combined, and various sensors and voice technologies are required to be connected and utilized through ICT (Information and Communications Technologies) technology in near future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.153-154
• /
• 2010

최근 GPS를 이용한 위치기반서비스(LBS)는 일상생활의 큰 변화를 가져왔다. 이러한 LBS 중에서도 가장 흔히 접할 수 있는 것이 차량 항법용 장치인 네비게이션이다. 초창기의 네비게이션이 단순히 목적지까지 가기 위한 가장 짧은 도로를 안내해 주는 것이 목적이었다면 최근에는 TPEG과 같은 실시간 교통 상황 안내, 이용자 선호도를 고려한 경로탐색, 에코 드라이빙과 같은 좀 더 높은 수준의 서비스가 개발되고 있다. 하지만 현재의 차량항법 시스템은 교통상황 안내 이외에는 현실적인 도로상황 반영이 어렵고 시간대별 통행량의 차이가 큰 국내 교통상황에 대한 고려가 미흡하다. 또한 교통정보 수집장치가 설치되지 않은 도로는 교통상황 안내마저도 제공되지 않는다. 본 논문에서는 이러한 문제점을 개선하기 위하여 임베디드 DBMS를 이용하여 과거 통행이력정보를 저장하고 활용할 수 있도록 도로망 DB스키마를 정의하였다. 그리고 이를 탐색경로의 소요 시간 산출에 활용하여 실제적인 도로상황을 고려한 경로안내 방법을 제안한다. 실제주행이력은 네트워크 데이터의 링크단위로 관리되며 저장된 주행이력은 경로탐색에 필요한 정보인 진입시각, 진출시각, 요일, 통행횟수로 관리된다. 이렇게 단말기에 저장된 주행이력은 중앙DB를 통해 사용자간 공유가 가능하고 향후에는 실시간 동기화를 통해 더욱 신뢰도 높은 경로탐색에 활용될 수 있다.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.707-718
• /
• 2007

Recently, much studies for providing mobile users with suitable and useful content services, LBS(Location Based Service) corresponding to the change of users' location, are actively going on. First and foremost, this is basically owing to the progress of location management technologies such as GPS, mobile communication technology and the spread of personal devices like PDA and the cellular phones. Besides, the research scope of LBS has been changed from vehicle tracking and navigation services to intelligent and personalized services considering the changing information of conditions or environment where the users' are located. For example, it inputs the information such as heavy traffic, pollution, and accidents. The query languages which effectively search the stored vehicle and environment information have been studied depending on the increase of the information utilization. However, most of existing moving object query languages are not enough to provide a recommendation service for a user, because they can not be tested and evaluated in real world and did not consider changed environment information. In order to retrieve not only a vehicle location and environment condition but also use them, we suggest a moving object query language for recommendation service and implement a moving object query process system for supporting a query language. It can process a nearest neighbor query for recommendation service which considers various attributes such as a vehicle's location and direction, environment information. It can be applied to location based service application which utilizes the recommended factors based on environmental conditions.