• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.252-257
• /
• 1983

This study was conducted to find out the stalk curing methods that can reduce photobleaching, and shorten the curing period in burley to bacco stalk curing. The results obtained summarized as follows. In the ventilation window-plot, the temperature within the curing house was high and the curing period was shortened, too. The rate of photobleached leaves of whole plant stalk curing-plot was higher than those of any other plots. In the ventilation window-plot, the labor of operating the curing house was saved and the yield and visual quality of cured leaves were high, too. For reducing the photobleaching of leaves, following procedures are desirable; to prevent the lower leaves from drying up and overripening at maturing stage, cut the stalk after first or second priming, shorten the curing period as possible when the 80% of leaf bodies changed brown.

• Journal of Plant Biotechnology
• /
• v.46 no.2
• /
• pp.127-135
• /
• 2019

The purpose of this study was to investigate suitable parts for callus induction and optimal concentrations of growth regulators, contained in the medium affecting shoot and rooting for in vitro mass production of Haworthia truncata. Leaves and flower bud showed 100% callus formation rate at NAA $1{\sim}2mgL^{-1}$ treatment, and NAA $1mgL^{-1}$ + TDZ $2mgL^{-1}$ treatment. The flower stalk showed 75% callus formation rate, at NAA $2mgL^{-1}$ + TDZ $2mgL^{-1}$ treatment in H. truncata. While the rate of callus formation was high in leaves and flower bud, leaves were the most efficient in obtaining most culture parts. Shoot induction rate from callus was highest, at NAA $0.1mgL^{-1}$ treatment in H. truncata. Additionally, the number of shoots formation was 66.3 shoots high, in NAA $1mgL^{-1}$ + BA $0.1mgL^{-1}$ treatment in H. truncata. In the case of acclimatization of regenerated plant, growth characteristics did not show significant difference (95%) shading with respect to the different ratio of substrate mixture, and it was determined that would be appropriate, considering plant height and appearance preference of H. truncata. It was established that optimization of culture condition, was responsible for mass propagation in vitro cultures of H. truncata.

• Journal of Plant Biotechnology
• /
• v.46 no.1
• /
• pp.22-31
• /
• 2019

The objective of this study was to investigate the suitable parts for callus induction and optimal concentrations of growth regulators contained in the medium affecting shooting and rooting Echeveria laui and Echeveria elegans for in vitro mass production. To determine the suitable plant parts for callus induction, the leaves were divided into upper, medium and bottom parts and cultured on MS medium at different concentrations with $0{\sim}2mgL^{-1}\;NAA$ and $0{\sim}4 mgL^{-1}BA$. The upper and middle parts of leaves both showed 100% callus formation rate with $NAA\;1\;mgL^{-1}$ and $BA\;1\;mgL^{-1}$ treatment in E. laui. The middle parts of leaves showed 83.3% callus formation rate at $NAA\;2\;mgL^{-1}$ and BA 4 mgL-1 treatment in E. elegans. The shoot induction rate from callus was highest at $NAA\;0.1\;mgL^{-1}$ and $BA\;3\;mgL^{-1}$ treatment in E. laui and $NAA\;0.3\;mgL^{-1}$ in E. elegans. In addition, the number of shoots formation was 10.4 shoots high in $NAA\;1\;mgL^{-1}$ and $BA\;1\;mgL^{-1}$ treatment in E. laui and 12.0 shoots in most effective $NAA\;1\;mgL^{-1}$ and $BA\;0.1\;mgL^{-1}$ treatment in E. elegans. In the case of acclimatization of regenerated plant, growth characteristics did not show any significant difference (35 ~ 55%) shading with respect to the different ratio of substrate mixture, and it was determined that would be appropriate considered plant height and appearance preference of E. laui and E. elegans. It was established that the optimization of culture condition was responsible for the mass propagation in vitro cultures of E. laui and E. elegans.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.100-108
• /
• 2012

The purpose of the study was to evaluate the influence of shading and ventilation on Mean Radiant Temperature(MRT) of the outdoor space at a summer outdoor. The Wind Speed(WS), Air Temperature(AT) and Globe Temperature(GT) were recorded every minute from $1^{st}$ of May to the $30^{th}$ of September 2011 at a height of 1.2m above in four experimental plots with different shading and ventilating conditions, with a measuring system consisting of a vane type anemometer(Barini Design's BDTH), Resistance Temperature Detector(RTD, Pt-100), standard black globe(${\O}$ 150mm) and data acquisition systems(National Instrument's Labview and Compfile Techs' Moacon). To implement four different ventilating and shading conditions, three hexahedral steel frames, and one natural plot were established in the open grass field. Two of the steel frames had a dimension of $3m(W){\times}3m(L){\times}1.5m(H)$ and every vertical side covered with transparent polyethylene film to prevent lateral ventilation(Ventilation Blocking Plot: VP), and an additional shading curtain was applied on the top side of a frame(Shading and Ventilation Blocking Plot: SVP). The third was $1.5m(W){\times}1.5m(L){\times}1.5m(H)$, only the top side of which was covered by the shading curtain without the lateral film(Shading Plot: SP). The last plot was natural condition without any kind of shading and wind blocking material(Natural Open Plot: NP). Based on the 13,262 records of 44 sunny days, the time serial difference of AT and GT for 24 hour were analyzed and compared, and statistical analysis was done based on the 7,172 records of daytime period from 7 A.M. to 8 P.M., while the relation between the MRT and solar radiation and wind speed was analyzed based on the records of the hottest period from 11 A.M. to 4 P.M.. The major findings were as follows: 1. The peak AT was $40.8^{\circ}C$ at VP and $35.6^{\circ}C$ at SP showing the difference about $5^{\circ}C$, but the difference of average AT was very small within${\pm}1^{\circ}C$. 2. The difference of the peak GT was $12^{\circ}C$ showing $52.5^{\circ}C$ at VP and $40.6^{\circ}C$ at SP, while the gap of average GT between the two plots was $6^{\circ}C$. Comparing all four plots including NP and SVP, it can be said that the shading decrease $6^{\circ}C$ GT while the wind blocking increase $3^{\circ}C$ GT. 3. According to the calculated MRT, the shading has a cooling effect in reducing a maximum of $13^{\circ}C$ and average $9^{\circ}C$ MRT, while the wind blocking has heating effect of increasing average $3^{\circ}C$ MRT. In other words, the MRT of the shaded area with natural ventilation could be cooler than the wind blocking the sunny site to about $16^{\circ}C$ MRT maximum. 4. The regression and correlation tests showed that the shading is more important than the ventilation in reducing the MRT, while both of them do an important role in improving the outdoor thermal comfort. In summary, the results of this study showed that the shade is the first and the ventilation is the second important factor in terms of improving outdoor thermal comfort in summer daylight hours. Therefore, it can be apparently said that the more shade by the forest, shading trees etc., the more effective in conditioning the microclimate of an outdoor space reducing the useless or even harmful heat energy for human activities. Furthermore, the delicately designed wind corridor or outdoor ventilation system can improve even the thermal environment of urban area.

• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.166-170
• /
• 2000

Three methods for heat collection, which were the flat solar collector, two fan with radiator, and square pipe method, were studied to sue efficiently solar energy in the three different glasshouses for two years. The flat plate solar collector method was made use of the commercial solar collector with collection area of 24$m^2$, the method of two fans with radiators collected solar energy at the top of the glasshouse. An thermal storage tank was constructed underneath in teach glasshouses. When an area of 1,000$m^2$ was heated to the minimum temperature of 9$^{\circ}C$, the decrease rate of heating fuel for the flat plate solar collector, the fan attached radiator and the square pipe methods were 7%, 19% and 28% respectively. The flat plate solar collector method, which could be heated approximately 40-50$m^2$, was currently used by most of the farmer. Under the condition, the decrease rate of annual heating fuel was 14% which was not better for an economic annual heating fuel. If the fan with radiator method was operated, the use of installation and maintenance were required. So, it could not be good economic efficiency of solar heating. The heating efficiency of the square pipe method was relatively better thant those of the flat plate solar collector or the fan attached radiator. Since the cost of materials and its installation of the use of square pipe method was lower than any other method. However, corrosion of the pipe, greater shade in the greenhouse and strength against the square pipe were problems that should be overcome in the square pipe method.