• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.279-282
• /
• 2011

Dye-sensitized solar cell (DSSC); an alternate energy source harvester has gained some attractive features such as high-energy conversion efficiency low production cost. Dye-sensitizer is a basic component of DSSC, which affecting the performance of the energy conversion efficiency. Current research has been focusing on development of high efficiency, metal-free dye-sensitizers, which would be more environmental friendly. We had successfully explored synthetic route to 6,6'-(1,2,5-oxadiazole-3,4-diyl)dipyridine-2,4-dicarboxylic acid (3A) which has been used as organic sensitizer. Investigation of light conversion efficiency (${\eta}$) of the compound uses standard measurement condition (one sun simulated irradiation, AM 1.5, 100 mW/$cm^2$) showed that it could reach 1.00% ($J_{SC}=2.63\;mAcm^{-2}$, $V_{OC}$=0.64 V and FF=0.59). Under the same conditions, the ruthenium complex (N719) gave the conversion efficiency as high as 4.02%($J_{SC}=10.50\;mAcm^{-2}$, $V_{OC}$=0.67V and FF=0.57).

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.28-33
• /
• 2010

Solar collectors to be applied are mainly flat-plate or vacuum tube collector which is used for hot water supply of house because of low heat value and low temperature. There are a necessity to expand applicable scope of solar collector into the industrial process heat source and air conditioner for coping with renewable energy policy of government and industrial trend. This study is to analysis the performance of PTC solar collector of concentrating type and flat-plate of non-concentrating. For this, temperature difference and heating value as insolation of air outside is measured from these two collectors mounted on 2-axial solar tracking system. It is investigated that temperature profile obtained from PTC solar collector is uniform and collecting heat per unit area is 6.8kcal/$m^2$ min which is about 3 times with compare to flat-plate collector of 2kcal/$m^2$min. Also the amount of heat to be produced from PTC solar collector is 3 Mcal/$m^2$ which is about 2 times with compare to flat-plate collector of 1.5Mcal/$m^2$ as a result of operating these two collectors during one month. Therefore, it is obtained that heat collecting performance of PTC solar collector is superior to flat-plate.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.118-124
• /
• 2010

In order to develop commercial model of 10kW dish-Stirling solar thermal power system, modification for the exiting facility was taken for a year as a Leading Project in KIER. During the project, solar tracking system, control and monitoring system and high durability reflector were developed and long term operation were performed. The solar tracking system was tested for four months to investigate the degree of precision and adapted to the control system for an actual operation from October in 2009. The sun tracking accuracy of ${\pm}4$ mrad using modified control system was obtained and the system operated successfully during the experimental period. The monitoring system displays engine pressure, electric generation amounts, generator RPM, receiver temperatures, and etc. from Stirling engine and weather data of Direct Normal Irradiation, Horizontal Global Insolation, wind speed & direction, and atmosphere temperature from weather station. According to the operating results in a clear sky day, electric power of 6,890 W was generated at the DNI value of 850 W/$m^2$ and the averaged solar-to-electricity efficiency during a whole day reached to 18.99%. From the overall operating results, linear power generation trend could be observed with increasing DNI value. The solar-to-electricity efficiency achieved to 19% around the DNI value of 700 W/$m^2$ and increased to 20% when the DNI value goes up to 900 W/$m^2$.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.34-44
• /
• 2017

This paper deals with the effectiveness of a fiber optic solar lighting system that uses a Fresnel lens mounted on a two-axis solar tracker. A series of comparative analyses were made concerning its performance as compared to fluorescent lighting by using a simulation model based on ECOTECT and RADIANCE as well as referring to actual data. ECOTECT was used to model the test room (space) while RADIANCE was used for its indoor lighting conditions (environment). It was found that the average indoor light levels of fluorescent lighting fully satisfy the KS standard (KS A 3011, general office, class [G]: 300-400-600lux) whereas those of the solar lighting with light diffusers depends on the occlusion factor of roller shades installed on the south window.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.133-133
• /
• 2010

3-5족 화합물 반도체를 이용한 집광형 삼중 접합 태양전지는 35% 이상의 광변환 효율로 주목을 받고 있다. 일반적으로 삼중 접합 태양전지는 넓은 영역대의 파장을 흡수하기 위해 밴드갭이 다른 InGaP, GaAs, Ge이 사용된다. 그 중 하부셀은 기계적 강도가 높고 장파장을 흡수할 수 있는 Ge이 사용되는데, p-type Ge 기판위에 III-V 결정막 성장 시 5족 원소가 확산되어 pn접합을 형성하게 된다. 이러한 구조를 가진 Ge 하부셀이 효율적으로 홀-전자 쌍을 형성하기 위해서는 두꺼운 베이스와 얇은 에미터 접합이 필요하다. InGaP의 phosphorus는 낮은 확산계수로 인해 GaAs의 arsenic에 비해 얇은 접합이 형성 가능하며, Ge표면 에칭효과가 더 적다는 장점이 있다. 이를 고려해 우리 연구그룹에서는 metalorganic chemical vapor depostion(MOCVD)을 이용하여 Ge기판위에 성장한 InGaP layer의 특성을 관찰해 보았다. <111>로 $6^{\circ}$ 기울어진 p-type Ge(100) 기판위에 MOCVD를 통해 InGaP layer를 형성하였고, 성장된 layer를 atomic force microscope(AFM)와 high-resolution x-ray diffraction(HRXRD)을 이용하여 표면형상, 조성, 응력상태 등을 각각 관찰하였다. 또한 phosphorus 확산에 의해 형성되는 도핑농도는 electrochemical capacitance-voltage(ECV)을 이용하여 관찰하였다. 성장된 Ge기판위의 InGaP layer의 경우 특징적으로 높이 50 nm, 밑변 길이 $1\;{\mu}m$의 경사진 표면을 관찰할 수 있었으며, 이러한 구조는 TMIn과 TMGa의 비율이 증가 할수록 감소하였다. 따라서 이러한 경사진 형태의 구조는 격자 불일치 때문인 것으로 판단된다. 추가적으로 V/III ratio의 최적화를 통해 1.3 nm의 표면 거칠기를 갖는 InGaP layer를 얻을 수 있었다. ECV를 통해 Ge 하부셀의 pn접합 형성을 관찰한 결과 약 160 nm에서 접합이 형성되는 것을 관찰할 수 있었다. 또한, 같은 성장 조건의 샘플을 1000 초 열처리 후에 접합깊이의 변화를 관찰한 결과 180 nm에서 접합이 관찰되었지만, GaAs의 arsenic에 의한 pn접합은 열처리 후에 그 깊이가 170 nm에서 300 nm로 증가 하였다. 따라서 삼중접합 태양전지의 제작 공정을 고려할 경우 phosphorus에 의한 접합 형성이 Ge 하부셀의 동작 특성에 유리할 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.132-132
• /
• 2010

3-5족 화합물 반도체는 직접천이형 반도체이며, 여러가지 우수한 특성으로 인하여 고효율의 태양전지물질로 각광을 받고 있다. 또한 3중접합 구조를 이용한 집광형태양전지의 경우, 40% 이상의 높은 효율을 보인다고 보고 되고 있다. 이러한 고효율 태양전지를 실리콘 기판위에 성장할 경우, 대면적에서의 태양전지제작이 가능해지며, 단가절감이 가능할 것이라고 예상된다. 하지만, 하부셀로 사용되는 게르마늄과 실리콘의 4.2%의 격자상수차이로 인하여, 고품질의 게르마늄 박막을 실리콘 기판위에 성장하는 데에 있어서 많은 문제점이 있으며, 이러한 문제점을 극복하기 위하여, 저온에서 성장한 게르마늄 박막을 완충층으로 사용하는 2단계 성장법이 제안되었다. 하지만, 2단계 성장법에서 저온 완충막의 성장조건이 게르마늄 박막에 미치는 영향은 명확하지 않다. 본 연구팀은 초고진공 화학기상증착법을 이용하여 순수 게르마늄 박막을 실리콘 기판 위에 성장하였으며, 저온 완충막의 두께를 20 nm에서 120 nm까지 변화시켜서, 완충막의 두께가 게르마늄박막에 미치는 영향에 대해서 연구해 보았다. 그 결과, 40 nm이하의 두께를 갖는 완충막을 사용할 경우, 박막 내부에 실리콘 게르마늄을 형성하면서, 거친 표면이 형성되었다. 반면에, 40 nm보다 두꺼운 완충막을 사용할 경우 평탄한 표면을 갖는 순수게르마늄박막이 형성되었다. 이를 통해서, 순수 게르마늄박막 성장을 위해서는 일정 두께 이상의 저온 완충막이 사용되어야함을 알 수 있었다. 또한 게르마늄박막의 관통 전위 밀도를 분석해 본 결과 완충막의 두께가 80 nm까지 두꺼워짐에 따라서 초기에는 관통전위밀도가 $1.2\;{\times}\;10^6\;cm^{-2}$ 까지 감소하는 경향을 보였으나, 완충막의 두께가 더욱 증가할 경우 관통전위밀도가 증가하였다. 이러한 결과를 바탕으로 저온 완충막의 두께를 조절함으로써 최적화된 게르마늄의 성장이 가능함을 확인할 수 있었다.

• Journal of Institute of Convergence Technology
• /
• v.2 no.1
• /
• pp.13-17
• /
• 2012

Concentrated Solar Power (CSP) is a renewable energy to generate electricity by using solar thermal energy as a heat source to drive turbines or engines for thermodynamic cycles. This paper introduces ongoing projects in SolarPACES(Solar Power and Chemical Energy systems) under the REWP(Renewable Energy Working Party) in the IEA(International Energy Agency). Then, the current status of international CSP markets and domestic activities is summarized. Finally, the CSP outlook by IEA and the key technological challenges to be overcome for its realization are presented.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.1019-1025
• /
• 2019

The aim of this study was to analyze the light traits in a solar light-collector device and its effects on lettuce growth at an early growth stage. The three hyper parameters used were the reflector diameter (2 cm and 4 cm), coating inside the reflector (chrome-coated, non-coated) and distance from the light fiber (15 cm and 20 cm). The results showed that light efficiency, which is the ratio of light intensity inside the fiber to the solar intensity, improved by 41.1 % when using a 2 cm diameter chrome-coated reflector at a distance of 15 cm from the light fiber; whereas it only improved by 20.6% when a non-coated reflector was used. As the reflector size was increased to 4 cm, the light efficiency for the coated and non-coated reflectors increased by 28.5 % and 26.4 %, respectively, hence, no significant difference was observed. When the light fiber was placed at a distance of 20 cm, the increase in light efficiency with coating treatment was 8 % higher than without coating treatment. We also compared the efficiency of light-fiber treatment with that of LED treatment in our lettuce nursery, and observed that the plants exhibited better growth with light-fiber treatment. We observed an average increase of 1.7 cm in leaf height, $7cm^2/plant$ increase in leaf area, and 32 mm increase in root length upon light-fiber treatment as opposed to those observed with LED treatment. These findings indicate that the collector light-fiber is economically feasible and it improves lettuce growth compared with the LED treatment.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.83-87
• /
• 2015

This study was focused on developing an optical sensor that monitors ultraviolet (UV) light. Recently, we proposed and demonstrated a novel, highly sensitive UV sensor based on a fiber Bragg grating (FBG). To ensure that the incident UV light is focused on the FBG surface, the sensor was coated with an azobenzene polymer material that acts as a UV-induced stretchable functional material, in combination with a cylindrical focal lens. In this study we have improved the sensitivity of the sensor by employing a cylindrical focal mirror as a curved reflector, to refocus the UV light passing through the FBG. We considered the performance of several different types of reflectors and chose the optimal radius of curvature for the reflector. Compared to the UV sensor without an auxiliary device, the sensitivity of the FBG sensor with a focal lens and a curved reflector was 15 times as high.