• Title/Summary/Keyword: 질량선

Search Result 209, Processing Time 0.023 seconds

질량이 낮은 별의 탄생에서 에피소딕 중력수축 모델 검증

  • Kim, Hyo-Jeong
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.38 no.1
    • /
    • pp.54.1-54.1
    • /
    • 2013
  • 이 연구는 질량이 낮은 별탄생 지역에서 '에피소딕 질량수축 이론'을 관측과 수치모델로 테스트하였다. 스피쳐 우주망원경을 비롯한 여러 망원경으로 별 탄생 지역을 관측한 결과, 어린 별의 광도는 0.01 태양광도에 불과한 매우 낮은 값에서부터 높은 값까지 넓은 영역에 걸쳐 분포한다는 것이 알려졌다. 이 관측 결과는 70년대부터 있어 온 소위 표준 별탄생 모델의 예측과는 다른 결과이다. 관측과 표준 별탄생 모델의 차이를 풀기 위해서 에피소딕 질량수축 모델이 제안되었다. 테스트를 통하여 광도가 낮은 어린 별의 관측적 특성이 에피소딕 질량수축 모델로 한꺼번에 설명될 수 있음을 보였다. 우선, 카르마 전파 간섭계를 사용하여 전체 어린 별의 광도 분포에 해당하는 별 샘플을 선택하여 관측하였다. 표준 별탄생 모형은 중력수축이 진행됨에 따라 디스크 질량이 점진적으로 증가하지만 에피소딕 중력수축 모델은 디스크 질량과 별의 진화상태 사이에 특별한 연관관계가 없음을 예측한다. 여섯 개의 측정된 디스크 질량은 별의 진화상태와 상관없음을 보여주었다. 다음으로, 열아홉 개 어린 별의 이산화탄소 얼음을 적외선으로 분광 관측하고 분석하였다. 관측대상별 중 절반은 다른 분자와 섞이지 않은 순수한 이산화탄소 얼음이 존재한다는 증거를 보였고, 그 중 여섯 개는 순수 이산화탄소 얼음 존재의 강력한 증거인 두개의 픽이 나온 흡수선 형태를 보였다. 순수 이산화탄소 얼음 성분이 현재 광도가 낮은 별에서 존재한다는 것은 과거에 광도가 밝았던 시기, 즉 중력수축속도가 높았던 시기가 있었다는 것을 뒷받침한다. 화학진화모델에 에피소딕 중력수축 모델과, 일산화탄소 얼음이 이산화탄소 얼음으로 전환될 수 있다는 새로운 화학 네트워크를 포함한 모델로 광도가 낮은 어린 별에서의 순수 이산화탄소의 존재, 총 이산화탄소의 양, 그리고 관측된 일산화탄소 가스의 양을 모두 설명할 수 있었다.

  • PDF

LINE PROFILES DEPENDENT ON THE OPACITY PARAMETER IN AZ CAS (AZ Cas의 불투명도 계수에 따른 선윤곽)

  • 김경미;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • v.10 no.2
    • /
    • pp.146-151
    • /
    • 1993
  • AZ Cas는 B형의 주계열 별과 확장 대기를 가진 만기형으로 이루어진 쌍성계이다. 근성점 근처에서 Roche lobe를 채운 초거성으로부터 일어나는 질량 흐름이 미치는 효과를 구하기 위해 궤도위상 0.05와 0.09에서 불투명도 계수에 따른 AZ Cas의 선윤곽을 계산하였다. 원천 함수는 Hempe(1982)의 방법을 따라 Sobolev 근사방법을 이용하였으며 불투명도 계수가 클수록 넓은 흡수 부분을 가진 강한 선윤곽을 보였다. 궤도 위상 0.05의 부분식이세 나타난 bump는 흡수선위에 포피의 산란에 의해 생긴 방출선이 중첩되어 나타난 재방출 효과인 것으로 설명된다.

  • PDF

The Measurement of National Standard ${\beta}$-Rays Energy Spectrum (기준 베타선장의 에너지 스펙트럼 측정)

  • Kim, Chul-Hang;Yi, Chul-Young;Kim, Hyun-Moon;Hah, Suck-Ho;Jeon, Gook-Jin
    • Progress in Medical Physics
    • /
    • v.23 no.4
    • /
    • pp.285-291
    • /
    • 2012
  • In the present study, we measured the pure beta particle energy spectra of $^{147}Pm$, $^{85}Kr$, $^{90}Sr+^{90}Y$ radionuclide sources. We confirmed the residual maximum energies of KRISS sources meet the requirement of ISO 6980 and calculated mass collision stopping power ratio, which is essential for absolute measurement of absorbed dose from the reference ${\beta}$-rays. The residual maximum energies of KRISS $^{147}Pm$, $^{85}Kr$, $^{90}Sr+^{90}Y$ sources are 0.14, 0.57 and 0.93 MeV, respectively and the mass collision stopping power ratios are 1.123, 1.120 and 1.109, respectively.

Motions of Semi-submersible Drilling Rigs in Deep Water (Semi-submersible 석유시추선(石油試錐船)(부체해양구조물(浮體海洋構造物))의 운동(運動) -계산방법(計算方法), 해석(解析) 및 응용(應用))

  • Jin-S.,Chung
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.11 no.2
    • /
    • pp.23-40
    • /
    • 1974
  • Semisubmersible 해양석유시추선의 기본설계에 필요한 파랑중(波浪中)에서 운동(運動)을 계산(計算)하는 이론적방법(理論的方法)을 제시하고 "MOHOLE"과 "SEDCO 1350-F" 석유시추선들의 운동(運動)을 해석하였다. 이 규칙파에서 운동계산을 불규칙해양파(波)에 적용하는 응용해석을 보여주었다. 현재 이론적 방법으로는 6자유도(自由度)의 운동을 해양파의 어떤 방향에 대해서도 정확히 계산할 수 있으며 계산의 정확성은 수조(水槽)에서의 모형선의 운동측정치와 실선(實船)의 운동측정치와 비교하여 증명되었다. 또 현재의 방법은 종전에 개발된 방법보다 더 일반적(一般的)인 경우를 다룰 수 있으며 결과치도 더 정확하다. 극소운동특성을 갖는 해양석유시추선과 부체(浮體)해양구조물의 설계는 경비가 비싸고 시간이 많이 드는 모형실험보다는 유체역학적(流體力學的) Parameters를 신속 정확히 자주 변경 검토해야 하는 기본설계단계에서는 정확한 이론적인 전자계산기에 의한 계산방법이 절실히 필요하다. 예상(豫想)과 같은 부가질량(附加質量)과 감쇠력(減衰力)은 Resonance 운동주기에서만 운동에 영향을 준다. 해양구조물에 작용하는 파력(波力)은 Froude-Krilov force, 부가질량(附加質量) 및 감쇠력(減衰力)과 Restoring force로 구성했으며 규칙파(規則波)에서의 6자유도(自由度) 운동방정식은 본 논문에 제시된 실험측정치(値)와 실험으로 정확도가 증명된 이론치(値)의 부가질량과 감쇠력 계수(係數)를 써서 풀었다. 규칙파(規則波)에서의 계산된 운동을 Pierson Moskowitz 해양파(海洋波) 스펙트럼과 linear superposition principle에 의해 불규칙해양파(不規則海洋波)에서의 운동을 계산하는데 사용했다. 불규칙파(不規則波)에서의 운동은 운동스펙트럼과 통계적 운동치로 나타냈다. 현재의 계산방법은 실제 기본설게에 사용되어 왔으며, 다른 응용분야는 파랑중(波浪中)에서의 파면(波面)과 Deck간(間)의 Clearance, 계류선(係留線)의 동장력(動張力)계산의 기본 Data 및 기본설계의 Draft 등 Parameters를 통(通)한 Optimum Design 등(等)이다. 파(波)의 한 방향(方向)에 대(對)한 전자계산기(電子計算機)(IBM 370 또는 CDC 6400)에 의한 운동계산은 10초(秒)미만밖에 안걸린다. 또 현재의 계산방법은 해양석유시추선뿐 아니라 이와 비슷한 부체(浮體)해양구조물과 Pipe-laying선(船) 또 Supply Boat설계(設計)에도 쓰여지고 있다.

  • PDF

Preliminary Mission Design for a Lunar Explorer using Small Liquid Upper Stage (소형 액체상단을 이용한 달 탐사선 임무 예비설계)

  • Choi, Su-Jin;Lee, Hoonhee;Lee, Sang-Il;Lee, Seok-Hee;Lee, Keejoo
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.24 no.1
    • /
    • pp.17-23
    • /
    • 2020
  • Upper stage of launch vehicle mainly injects a lunar explorer from low earth orbit to the moon at a distance of 380,000 km. In foreign lunar explorer, the upper stage is separated from the explorer after the explorer is injected into the earth-moon transfer trajectory, and the lunar explorer then uses on-board propellant to carry out mid-course correction maneuvers and lunar orbit insertion maneuvers. This study describes a newly presented small liquid upper stage. Using a small liquid upper stage with a wet mass of 2.9 tonnes, the lunar explorer not only can be injected earth-moon transfer trajectory but also can be performed lunar orbit insertion. This study provides acceptable mass range of the lunar explorer and the scope of acceptable mission range also describes based on the launch from Naro Space Center.

독성 화학물질 분석기법 연구

  • Im, Jong-Seon;Lee, Seok-Gyu;Son, Byeong-Hun
    • Defense and Technology
    • /
    • no.7 s.281
    • /
    • pp.50-59
    • /
    • 2002
  • 이 글은 독성 화학물질 테러 발생시 보다 신속하고 정확한 분석을 통해 대응능력을 향상시키고 대비태세를 더욱더 확고히 하기 위해 현재 널리 사용중인 기체분리 질량분석기(GC-MS : Gas Chromato-graph-Mass Spectrometer)와 액체분리 질량분석기의 최적의 분석기법, 미지시료 분석절차를 연구하였다. 독성 화학물질 공격에 대한 미국의 방어 대비책은 1991년 걸프전시 이라크의 화학무기 사용을 저지시키는데 일익을 담당하였다.

  • PDF

A Study on the Natural Frequency of Composite Laminated Plate Under Attached Point Mass/Masses (첨가질량이 있는 적층복합판의 고유진동수에 관한 연구)

  • 홍창우;심도식;박제선
    • Computational Structural Engineering
    • /
    • v.10 no.1
    • /
    • pp.149-158
    • /
    • 1997
  • This paper presents the illustration of application under attached point mass to the special orthotropic plates with a pair of opposite edges simply supported and the other pair of opposite edges free. Design engineers need to calculate the natural frequencies of such elements but obtaining exact solution to such problems is very much difficult. Pretlove reported a method of analysis of beams with attached masses using the concept of effective mass. This method, however, is useful only for certain simple types of beam. Therefore, considering the method has been developed by D. H. Kim(1974) is simple, accurate, and very effective for the plates with arbitrary boundary conditions and irregular sections, this paper calculates the natural frequencies of composite laminated plate under attached point mass/masses.

  • PDF

Rapid Spectral Variability Monitoring of the Symbiotic Stars During One Night : CH Cyg, AG Dra, EG And

  • Yoon, Tae Seog;Kim, Soo Hyun;Oh, Hyung-il
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.45 no.1
    • /
    • pp.70.2-70.2
    • /
    • 2020
  • 공생별의 밝기 변화와 분광선 변화에 대한 지속적인 관측과 분석은 공생별 구성원의 구조, 거성으로부터의 질량 이동, 백색왜성 근처에서의 부착원반 형성과 이들의 진화에 대한 중요한 정보를 제공한다. 본 연구에서는 보현산 천문대 1.8-m 망원경과 고분산 에셀분광기 BOES를 이용하여 타 연구자에 의해 하룻밤 새 분광선 변화가 있다고 보고된 공생별 CH Cyg를 중심으로 AG Dra와 EG And의 방출선들에 대한 하룻밤 새 변화 모니터링 관측을 수행하였고, 이 세 공생별의 짧은 시간 내 분광적 변화 양상과 특성을 파악하고자 한다.

  • PDF

Time-dependent Evolution of Accretion Disk Mass in a Black Hole Microquasar Candidate A0620-00 (블랙홀 마이크로퀘이사 후보 A0620-00의 강착원반 질량의 시간적 진화)

  • Kim, Soon-Wook
    • Journal of the Korean earth science society
    • /
    • v.29 no.7
    • /
    • pp.579-585
    • /
    • 2008
  • The time-dependent evolution of disk mass for outburst limit cycle in a black hole microquasar is calculated based on the non-linear hydrodynamic model of thermally unstable accretion disk. The physical parameters such as black hole mass, disk size and mass transfer rate are adopted to reproduce the historical 1975 outburst observed in a prototype black hole X-ray nova A0620-00. The time-dependent effect of irradiation from the central hot region to the disk is considered in two ways: direct irradiation and indirect irradiation reflected from hot accretion flow above the disk. The accretion disk thermal instability model can account for the bolometric luminosity appropriate to typical characteristics of system luminosity observed in X-ray transients during the whole cycle of the outburst evolution. The maximum mass of the accretion disk, ${\sim}4.03{\times}10^{24}g$, is achieved at the ignition of an outburst, and the minimum value, ${\sim}8.54{\times}10^{23}g$, is reached during the cooling decay to quiescence. The disk mass varies ${\sim}5$ times during outburst limit cycle.

Dynamic Response and Control of Airship with Gust (외란이 작용하는 비행선의 동적 반응 및 제어)

  • Woo, G.A.;Park, I.H.;Oh, S.J.;Cho, K.R.
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.6
    • /
    • pp.69-77
    • /
    • 2002
  • To acquire the dynamic response and design the controller of the airship, the longitudinal motion of the airship with respect to the vertical gust, which is the nonlinear system, was studied. The effects of the apparent mass and moment of the airship delay the dynamic response and the settling time, which are slower than those of conventional airplanes. The current object of the airship is designed to cruise at 500~1000m altitude. At that height, the atmospheric conditions are generally unstable by wind gust. In this paper, it has been studied for the case of vertical gust, since the apparent mass effects are dominant in has been studied for the case of vertical gust, since the apparent mass effects are dominant in that plane. In addition to the study of the dynamic responses of the airship, the controller was designed using the PID-controller. When the gust was applied, airship responses were recovered of equilibrium states. However, it takes too ling time for recovery and the speed of airship is reduced. So, the aim in this paper was to fasten the recovery speed and to get back the cruising velocity. The control parameters were determined from the stability mode analysis, and the control inputs were the thrust and the elevator deflection angle.