• Title/Summary/Keyword: 질량비 변화

Search Result 371, Processing Time 0.047 seconds

Preparation of Pelletized Porous Adsorbent with Pyrolysis Temperature and Its Toluene Gas Adsorption Characteristics (열분해 조건에 따른 펠렛형 다공성 흡착재의 제조 및 톨루엔 가스 흡착 특성)

  • Kim, Do Young;Kim, Yesol;Cho, Seho;Jung, Jin-Young;Kim, Min Il;Lee, Young-Seak
    • Applied Chemistry for Engineering
    • /
    • v.24 no.6
    • /
    • pp.587-592
    • /
    • 2013
  • In this study, we prepared pelletized porous carbon adsorbent (PCA) according to the different pyrolysis temperature using activated carbon and polyvinyl alcohol (PVA) as a binder for the removal of toluene, which is one of the representative volatile organic compounds (VOCs). We investigated physical characteristics of PCA using FE-SEM, BET, TGA and evaluated their adsorption capacity for toluene using GC. It was confirmed that the formability of pellets composed of the activated carbon, PVA and solvent of mass mixing ratio was 1 : 0.2 : 0.8 was the most outstanding. Toluene adsorption capacity was evaluated by measuring the maximum time when more than 99% of toluene adsorbed on the pellet. The specific surface area of the adsorbent pyrolyzed at $300^{\circ}C$ was measured as 4.7 times in $941.9m^2/g$ compared to that of the unpyrolyzed pellet. Micropore volume and toluene adsorption capacity of PCA increased fivefold to be 0.30 cc/g and thirteenfold to be 26 hours compared to that of the unpyrolyzed pellet, respectively. These results were attributed to the change of pore size and specific surface area due to the PVA content and the different pyrolysis temperature.

The Hydrogenated Micro-crystalline Silicon(${\mu} c-Si:H$) Films Deposited by Hot Wire CVD Method (Hot Wire CVD법에 의한 수소화된 미세결정 실리콘(${\mu} c-Si:H$) 박막 증착)

  • Lee, Jeong-Cheol;Song, Jin-Su;Park, Lee-Jun
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.37 no.8
    • /
    • pp.17-27
    • /
    • 2000
  • This paper presents deposition and characterization of hydrogenated microcrystalline silicon (${\mu}c$ -Si:H) films on low cost glass substrate by Hot Wire CVD(HWCVD). The HWCVD ${\mu}c$ -Si:H films had deposition rates ranging from 2${\AA}$/sec to 35${\AA}$/sec with the variations of preparation conditions, which was 10 times higher than that of the films obtained from the conventional PECVD method. From the Raman spectroscopy, the prepared silicon films were found to be composed of the mixture of crystalline and amorphous phases. The crystalline volume fraction and average crystallite size, obtained from the Raman To mode peak near 520cm$^{-1}$, were 37-63% and 6-10 nm, respectively. The conductivity activation energy($E_a$) of the ${\mu}c$ -Si:H films, representing the difference of conduction band and Fermi level in an intrinsic semiconductors, increased from 0.22eV to 0.68eV with increasing pressure from 30mTorr to 300mTorr. The increase of $E_a$ with pressure indicates that the deposited films have properties close to intrinsic semiconductors, which is also proved with low dark conductivity of the ${\mu}c$ -Si:H deposited at 300mTorr. The tungsten concentration incorporated into films was about $6{\times}10^{16}atoms/cm^3$ in the samples prepared at wire temperature of 1800$^{\circ}C$.

  • PDF

Transcriptome Analysis of Streptococcus mutans and Separation of Active Ingredients from the Extract of Aralia continentalis (Streptococcus mutans의 전사체 분석과 독활 추출물로부터 활성 성분 분리)

  • Hyeon-Jeong Lee;Da-Young Kang;Yun-Chae Lee;Jeong Nam Kim
    • Journal of Life Science
    • /
    • v.33 no.7
    • /
    • pp.538-548
    • /
    • 2023
  • The research has been conducted on the isolation of antimicrobial compounds from plant natural extracts and their potential application in oral health care products. This study aimed to investigate the antimicrobial mechanism by analyzing the changes in gene expression of Streptococcus mutans, a major oral pathogen, in response to complex compounds extracted from Aralia continentalis and Arctii Semen using organic solvents. Transcriptome analysis (RNA-seq) revealed that both natural extracts commonly upregulated or downregulated the expression of various genes associated with different metabolic and physiological activities. Three genes (SMU_1584c, SMU_2133c, SMU_921), particularly SMU_921 (rcrR), known as a transcription activator of two sugar phosphotransferase systems (PTS) involved in sugar transport and biofilm formation, exhibited consistent high expression levels. Additionally, component analysis of the A. continentalis extract was performed to compare its effects on gene expression changes with the A. Semen extract, and two active compounds were identified through gas chromatography-mass spectrometry (GC-MS) analysis of the active fraction. The n-hexane fraction (ACEH) from the A. continentalis extract exhibited antibacterial specificity against S. mutans, leading to a significant reduction in the viable cell counts of Streptococcus sanguinis and Streptococcus gordonii among the tested multi-species bacterial communities. These findings suggest the broad-spectrum antibacterial activity of the A. continentalis extract and provide essential foundational data for the development of customized antimicrobial materials by elucidating the antibacterial mechanism of the identified active compounds.

The Effect of Radiation Therapy on the Healing Ability of Subsequent Surgical Wounds (방사선조사가 피부의 창상치유에 미치는 실험적 연구)

  • Suh, Hyun-Suk;Rhee, Chung-Sik
    • Radiation Oncology Journal
    • /
    • v.9 no.1
    • /
    • pp.17-25
    • /
    • 1991
  • This study was undertaken to find the effect of radiation therapy on the healing ability of surgical wounds and on this basis, to find the proper time interval between the radiation therapy and surgery. Two hundred and fifty-two mice were used and a single dose of 2000 cGy was given in each instances to the hind limb of mice. Incisional wounds were produced after varying intervals in the previously irradiated areas and then they were followed up at regular intervals by the measurement of tensile strength. The wounds which received surgery immediately, 1 or 2 weeks after irradiation revealed marked delay and the wounds which received surgery 12, 16 or 20 weeks after irradiation demonstrated slight delay in wound healing in terms of tensile strength measurement. But the wounds which received irradiation 4 or 8 weeks before surgery did not differ much in the wound healing process from that of the control group. Histopathologic studies of the wounds demonstrated epithelization in most instances as quickly as in the control wounds. The appearance of fibroblasts and collagen fibers has delayed momently and appeared to have close correlation with the tensile strength healing curves.

  • PDF

Estimation of Annual Variation of Ice Extent and Flow Velocity of Campbell Glacier in East Antarctica Using COSMO-SkyMed SAR Images (COSMO-SkyMed SAR 영상을 이용한 동남극 Campbell 빙하의 연간 면적변화 및 유속 추정)

  • Han, Hyangsun;Ji, Younghun;Lee, Hoonyol
    • Korean Journal of Remote Sensing
    • /
    • v.29 no.1
    • /
    • pp.45-55
    • /
    • 2013
  • Campbell Glacier in East Antarctica is one of the major glaciers that flow into Terra Nova Bay. It is necessary to estimate accurate extent and flow velocity of Campbell Glacier which influences the dynamics of mass balance of East Antarctic Ice Sheet. However, few studies on Campbell Glacier have been performed since 1990s. In this study, we obtained a total of 59 COSMO-SkyMed SAR images over Campbell Glacier from June 2010 to January 2012. We estimated variations in the extent of Campbell Glacier Tongue and flow velocity of Campbell Glacier by applying the image digitizing and the offset tracking by image matching. Although the extent of Campbell Glacier Tongue decreased in summertime due to ice calving and increased in wintertime, the variation in the extent was very small. Campbell Glacier Tongue retained mean extent of 75.5 $km^2$. The ice discharge of Campbell Glacier Tongue was estimated to be $0.58{\pm}0.12km^3/yr$, which was bigger than in 1989. The flow velocity over Campbell Glacier Tongue was estimated to be from 181 to 268 m/yr that was faster than in 1988-1989, which contributed to the increase in the ice discharge of the glacier.

Performance Characteristics of Water-Chilling Heat Pump Using CO2 on Control of Inverter Frequency (인버터 주파수 제어에 따른 CO2용 수냉식 열펌프의 성능 특성)

  • Son, Chang-Hyo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.12
    • /
    • pp.4721-4726
    • /
    • 2010
  • The performance characteristics of water-chilling heat pump using CO2 for the control of inverter frequency was investigated experimentally. An experimental apparatus is consisted of a compressor, a gas cooler, an expansion valve, an evaporator and a liquid receiver. All heat exchangers used in the test rig are counter flow type heat exchangers with concentric dual tubes, which are made of copper. The gas cooler and the evaporator consist of 6 and 4 straight sections respectively arranged in parallel, each has 2.4m length. The experimental results summarize as the following: for constant inlet temperature of evaporator and gas cooler, as mass flow rate, compression ratio and discharge pressure increases with the inverter frequency. And heating capacity and compressor work increases, but coefficient of performance(COP) decreases with the inverter frequency of compressor. As inlet temperature of secondary fluid in the evaporator increases from $15^{\circ}C$ to $25^{\circ}C$, compression ratio and compressor work decreases, but mass flow rate, heating capacity and COP increases with the inverter frequency of compressor. The above tendency is similar with performance variation with respect to the variation of inverter frequency in the conventional vapor compression refrigeration cycle.

Evaluation of Anastomotic Strength and in-vitro Degradability with Microvascular Anastomosis Coupler Based on Injection Molding Condition made by Biodegradable Polycaprolactone(PCL) (생체분해성 폴리카프로락톤(PCL) 미세혈관 문합커플러의 사출성형조건에 따른 문합강도 및 in-vitro 분해능 평가)

  • Ahn, Geun-Seon;Han, Gig-Bong;Oh, Seung-Hyun;Park, Jong-Woong;Kim, Cheol-Woong
    • Transactions of the KSME C: Technology and Education
    • /
    • v.1 no.2
    • /
    • pp.167-177
    • /
    • 2013
  • The use of mechanical anastomosis coupler instead of sutures has been increasing in microvascular anastomosis surgery. However, non-biodegradable anastomosis coupler has problems such as not only inflammatory reaction but also remaining permanently in operation wound. Therefore, we fabricated biodegradable anastomosis coupler using injection molding process to overcome the limitation of non-biodegradable anastomosis coupler. In various injection molding process conditions, the shrinkage was calculated with different cylinder temperatures and injection molding pressures and anastomotic strength was measured. As a result, changes in shrinkage hole part larger than the pin part. In addition, the shrinkage in the cylinder at higher temperatures increase. However, the higher the injection pressure, shrinkage tends to decrease, respectively. In-vitro degradation behavior of PCL anastomotic coupler evaluated for 12 weeks, water uptake was increased and molecular weight was accompanied by a reduction in mass of the biological degradation and reduction of anastomotic strength was confirmed. However, decreased levels of anastomotic strength enough to exceed the requirements of preclinical surgery, PCL microvascular anastomosis coupler suitable candidate materials that could identify.

Evaluation of Isolation Mechanism of Teflon or Steel Slag-Type Seismic Foundation Isolation Systems (테프론 또는 제강슬래그를 활용한 기초형 지진격리장치의 면진 메카니즘 평가)

  • Son, Su Won;Kang, In-Gu;Pouyan, Bagheri;Kim, Jin Man
    • Journal of the Korean Geotechnical Society
    • /
    • v.34 no.1
    • /
    • pp.5-16
    • /
    • 2018
  • In this study, seismic performance of geotechnical seismic isolation system capable of primary seismic isolation in the ground was evaluated. 1-G shaking table test was used to assess the performance of Teflon or steel slag as geotechnical seismic isolation systems installed beneath superstructure foundation. Response acceleration and response spectra were analyzed considering different input motions. The results were compared with those of fixed foundation structure without seismic isolation system. The steel slag-type seismic isolation system showed significant reduction in acceleration. The teflon-type seismic isolation system did not show significant effects on acceleration reduction in low-to-moderate seismicity condition, but it did show better effects in case of strong seismic condition. As input motion was transferred to the upper mass, the response spectrum of the fixed foundation structure was amplified in the short period range. In contrast, the response spectrum of the structure with seismic isolation using teflon or steel slag amplified in the long period range. It is found that the change of periodicity and the friction characteristics between isolation materials and foundations affected acceleration reduction.

The Effect of 12weeks Pilates Mat Exercise on Body Composition and Lipid Metabolism in Obese Middle-aged Women (12주간 필라테스 매트 운동이 비만중년여성의 신체구성 및 지질대사에 미치는 영향)

  • Baek, Soon-Gi
    • Journal of Industrial Convergence
    • /
    • v.18 no.5
    • /
    • pp.108-117
    • /
    • 2020
  • This study aims to provide basic data for maintaining and promoting health of obese middle-aged women who are interested in various chronic diseases such as cardiovascular disease and coronary artery disease by comparing and analyzing the effect on body composition and lipid metabolism through a 12-week Pilates mat exercise program for obese middle-aged women. This study targeted middle-aged women residing in Gyeonggi-do A, who are obese middle-aged women in their 40s and 50s with a body fat ratio of 30% or more, and had no regular exercise in the past three months. Obese middle-aged women(n=19) were divided into two groups, the Pilates mat exercise program group(n=9) and the control group(n=10), conducting exercise for 60 minutes three times a week for 12 weeks. As a result of analysis, the exercise group had a positive effect on body weight, skeletal muscle mass, body fat mass, body fat percentage, and BMI in body composition, but not in the control group. In the lipid metabolism, the exercise group had a positive effect on TC, TG, HDL-C, LDL-C, and FFA, but not in the control group. These results suggest that the 12-week Pilates mat exercise program conducted in this study is an exercise program that can prevent cardiovascular and chronic diseases in obese middle-aged women.

Sensory Evaluation of Quality and Constructability of Cement Mortar for Tile Direct Setting Method Depending on Mix Proportions (타일 떠붙임 시멘트 모르타르의 배합비 변화에 따른 품질 특성 및 시공성에 대한 관능 평가)

  • Hwang, Yin-Seong;Ki, Tae-Kyoung;Han, Dong-Yeop;Noh, Sang-Kyun
    • Journal of the Korea Institute of Building Construction
    • /
    • v.21 no.1
    • /
    • pp.11-19
    • /
    • 2021
  • The aim of the research is providing a fundamental data on quality and constructability of direct tile setting method depending on various cement to sand ratio for tiling dry cement mortar. A large number of tile setting failures reported is related with the cement mortar and its construction for tiling. Because of different materials of tiles, the properties of tiling dry cement mortar, an adhesive for tiling, can influence on quality and constructability of tiling differently. Practically, the easiest way of controlling the properties of the tiling dry cement mortar is to control the proportion of cement and sand. Hence, in this research, sand to cement ratio (S/C) was controlled. Since there is no standarized method on evaluating performance of dry cement mortar for tiling, a several sensory evaluation methods were suggested and executed. According to the experiments conducted in this research, the adhesive performance of cement mortar for tiles can be different depending on the sides such as tile and substrate. Additionally, depending on S/C, finishability, initial adhesive performance, and tile shifting resistance can be changed for ceramic tile. Therefore, under the conditions of this research, about 5 of S/C can be recommended for appropriate performace of tiling dry cement mortar.