• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.215-223
• /
• 2010

A seasonal circulation patterns in the Chinju Bay (CB) were suggested from the observed data at two channels of the Noryang Channel (NC) and the Daebang Channel (DC) during the period from 2005 to 2008. The water circulation in the CB is mainly controlled through the NC and the DC. In winter, tidal current at the surface layer of the NC flows from the Kwangyang Bay (KB) eastward into the CB, whereas the current at the bottom layer flows from the CB westward into the KB. In summer, tidal current at the surface layer of the NC goes from the CB westward into the KB. The flow system at the NC shows the typical pattern of thermohaline circulation. In spring, tidal current at the surface layer of the eastern part of the DC flows out into southeastern open ocean. However, in summer, the current in the western part of the DC flows into the CB through the DC. Also, the velocity in the western part of DC is 50~70 cm/sec stronger than that in the eastern part. To obtain better understanding on the seasonal circulation pattern in the NC and the DC, additionally the detailed studies on the field measurements and three dimensional numerical modeling are needed.

• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.119-128
• /
• 2000

Exposure to air and increased temperature induced successful spawning in Mytilus edulis, M. coruscus Crassostrea gigas and Pinctata fucata martensii. Developmental durations required for an egg to attain D-shaped larva and the D-shaped larva to reach pediveliger stage were estimated in these bivalves. Size of fertilized eggs was the largest (70.3 ${\mu}m$) in M. coruscus and the smallest (45.3 ${\mu}m$) in P. fucata martensii. At 17$^{\circ}C$, M. edulis and M. coruscus attained D-shaped larval stage within 48 hours after fertilization but those of C. gigas and B. fucata martensiii within 24 and 22 hours at 21 and 26$^{\circ}C$, respectively. The development duration required for a D-shaped larva to attain pediveliger stage was the longest (27 days) in M. coruscus and ranged between 20 and 22 days for the others. The shell length of the pediveliger was the longest (274.9 ${\mu}m$) in C. gigas and smallest (190.9 ${\mu}m$) in P. fucata martensii Length and height of larval shell was highly correlated with each other in all the 4 species. The shell height of C. gigas was more than the shell length beyond the size of 100 ${\mu}m$ shell length. However, shell length of the others was always longer than shell height at the larval stage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.4
• /
• pp.215-226
• /
• 2022

Significant efforts have been devoted to developing high-performance composite materials by emulating the structure of biological creatures with superior mechanical characteristics. Nacre has been one of the most sought-after natural structures due to its exceptional fracture toughness compared with the constituent materials. However, the effect of manipulating the nacre-like geometry on the impact performance has not been fully investigated thus far. In this study, composites of randomly manipulated nacreous geometry are numerically developed and the impact performance is analyzed. We develop an algorithm by which the planar area of platelets in the nacre-like design is randomly resized. Thereafter, the numerical models of nonuniform nacre-patterned multi-layer structures are developed and the drop-weight impact simulation is performed. The impact behaviors of the model are evaluated by using the ratio of absorbed energy, the von Mises stress distribution, and the impact force-time curve. Therefore, the effect of the geometric irregularity on the nacre-patterned design is elucidated. This insight can be efficiently utilized in establishing the optimum design of the nacre-patterned structure.

• Conservation Science in Museum
• /
• v.21
• /
• pp.17-28
• /
• 2019

The term jinjuseon(眞珠扇), meaning literally a pearl fan, refers to a fan decorated with precious stones for use in royal wedding ceremonies. This study examined a jinjuseon housed in the National Palace Museum of Korea (NPMK) which currently lacks jeweled ornaments. In order to determine whether pearls or other gemstone settings originally ornamented the fan,the surface and composition of the gray materials remaining on the washers were investigated and the fan was compared with other artifacts decorated using similar techniques. The analysis revealed that the gray materials visible around the round rims of the washers contain tin-lead alloys. The traces of folded nails suggest that soldering was not applied. The remains of the infill observed in other artifacts with bezel settings indicate that this jinjuseon in the NPMK collection was produced using abezel setting technique wherein pearls or other gemstones were affixed by filling cylindrical bezels with tin-lead alloys.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.857-864
• /
• 2018

Demand for developing artificial green pearl that meets the needs of modern people has been increasing. In this paper, eco-friendly inorganic pearlescent pigment was used instead of organic pigment and urethane resin was substituted for nitrocellulose which has been used as main materials in previous preparation method, increasing gloss from 73.4% to 86.7%. Urethane was coated on substrate before finishing with CVD, resulting high gloss of 96%. Colorimeteric analysis shows that a* and b* of CIE value was changed from +37.7 and +24.5 to +31.9 and +14.2 respectively because of CVD finishing, obtaining colorful, high gloss and durable artificial pearl. Quality and toxicity of samples was established by chemical resistance, glossiness, colorimeter, surface roughness, wear resistance, content of heavy-metal, and salt water test.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.639-646
• /
• 2022

Occurrence of black opaque hydrocarbon (pyrobitumen) in some Cretaceous Jinju sandstones of the Sindong Group, Gyeongsang Basin in Korea is first reported in this study. The pyrobitumen is developed on chlorite pore-lining cement, or impregnated into the outer zone of chlorite cement. Therefore, it seems to have been formed after the precipitation of chlorite cement, indicating the former presence of crude oil. The liquid hydrocarbons migrated into sandstones during moderate burial and these sandstones seem to have acted as a liquid hydrocarbon reservoir. The presence of pyrobitumen in the Jinju Formation indicates that this formation underwent deep burial after liquid hydrocarbon migration. As reservoir temperatures increased further, hydrocarbons were cracked and a solid pyrobitumen residue remained in the reservoir.

• Landscaping Tree
• /
• s.127
• /
• pp.20-25
• /
• 2012

진주성과 촉석루 그리고 푸른 남강으로 유명한 서부 경남의 중심도시 진주시에 자리한 우리 조경수협회 경남서부지회 김진기 사무국장의 백천조경을 찾았다.

• Proceedings of the KSFDT Conference
• /
• 2006.04a
• /
• pp.75-80
• /
• 2006

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2020.10a
• /
• pp.24-25
• /
• 2020

• Journal of the Korean association of regional geographers
• /
• v.11 no.5
• /
• pp.349-367
• /
• 2005

The purpose of this paper is to establish three themes of regional instruction based on new regional geography and to examine explanation of space, understanding of place and judgement of environmental values for the Jinju regional instruction. Under the premise that region is the representation of space, place, and environmental perception, we reviewed location and space, event and place, development and environmental values in Jinju area. The results of the study are as follows: Owing to locational conditions, commercial agriculture, industrial and agroindustrial park, bio industry have been developed in Jinju. There are however some tasks that have to be solved such as rural investment, industrial park relocation and economic reconstruction. The Jinju castle combat, Farmers' resistance in 1862, Human right campaign for butchers in 1923, and educational conflict all occurred in the Jinju community. These events resulted in the integration and separation of the stratified citizens. They were represented as a variety of semiotics and landscape in the place. Citizens who live in Jinju are confronted with judging the environmental values. They ask whether inviting companies to town will ensure environmentally sound and sustainable development. The regional characteristics of knowledge, culture and environment in Jinju have been reproduced through the economic activity, place understanding, place marketing, and citizens' campaign.