• 제목/요약/키워드: 진동 시간분석

검색결과 435건 처리시간 0.025초

Time-frequency Analysis of Train Vibration Using Order Analysis and Correlation (오더분석 및 상관관계를 활용한 철도차량 진동 데이터의 시간-주파수 분석)

  • Choi, Sung-Hoon;Igusa, Takeru;Park, Choon-Soo
    • Journal of the Korean Society for Railway
    • /
    • 제12권6호
    • /
    • pp.989-995
    • /
    • 2009
  • Short-time Fourier transforms (STFT) are useful for analyzing signals with harmonics that vary with time. If the variation of the harmonics with time is smooth, such as in kinematic vibrations in vehicles, then it is possible to improve the STFT using order spectra and correlation analysis. In this paper, it is shown how correlation analysis can be performed when the speed signal is noisy or unknown and then it is shown how order spectra become simple to compute after this analysis. The results are illustrated by an analysis of axle and car body vibrations in the prototype high-speed train, HSR-350x.

Strength Characteristics of Concrete Subjected ta Vertical Continuous Vibration during Initial Curing Period (초기양생 중에 수직방향 연속진동을 받은 콘크리트의 강도특성)

  • Kim Jong-Soo;Jang Hee-Suk;Kim Myung-Sik;Kim Hee-Sung
    • Journal of the Korea Concrete Institute
    • /
    • 제17권2호
    • /
    • pp.273-297
    • /
    • 2005
  • In construction site, there are some occasions where concrete under initial curing is being affected by nitration from nearby vibration sources. To study these effects, in this paper, strength characteristics of concrete specimens subjected to continuous vibration up to 12 hours in vertical direction after concrete placement were observed. And through the vibration time control experiment where a number of time combinations consisted of times before and after applying vibration during initial curing period were used as experimental parameters, possibility of concrete strength improvement was investigated. From the experimental results, it could be seen that the concrete strengths were mostly decreased due to the increase of vibration velocity during initial curing period. But fluctuation ratio of concrete strength did not have any close correlations with the vibration times. And results of vibration time control experiment showed that if times before applying vibration sustains at least more than 3 hours, subsequent vibrations after that hours do not affect the concrete strength in any unfavorable ways.

Development of Vocal Signals in the Pipistrellus abramus(Chiroptera: Vespertilionidae) (집박쥐의 발성 시그널 발달에 관한 연구)

  • Chung, Chul-Un;Han, Sang-Hoon;Lee, Chong-Il
    • Korean Journal of Environment and Ecology
    • /
    • 제24권2호
    • /
    • pp.202-208
    • /
    • 2010
  • This study reports developmental changes in the vocal signals produced by infant or young Pipistrellus abramus. In contrast to adult bats, infant bats of the P. abramus emitted calls characterized by multi harmonics and variable signal patterns. Infants at two day of age emitted a irregular signal and showed gentle FM signals between 10 and 20 days. After about 40 days of age, the young bats emitted similar signals to the echolocation calls of adults. As the infant bats growing up, vocal signals trend showen a decrease in pulse duration(p<0.001), pulse interval(p<0.001) and number of harmonic(p<0.001). And the peak frequency(p<0.001), starting frequency(p<0.001) and ending frequency(p<0.001) in infant bats increased with the age. The largest change in pulse interval occurred in 5 days. And the pulse duration, peak frequency, starting frequency and ending frequency of the bat's sounds changed most dramatically in 25 days of age.

The Research on the Vibration of the Circular Plate for Varying Free Arc Angles by Time-Average Holographic Interferometry (시간평균 홀로그래픽 간섭계를 이용한 경계조건의 변화에 따른 원형평판의 진동에 관한 연구)

  • 이기백;양장식;나종문
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • 제16권10호
    • /
    • pp.1900-1907
    • /
    • 1992
  • This paper presents the vibration mode, natural frequencies and amplitudes of the circular plate due to the changes of the boundary conditions by varying free arc angles. The vibration mode, amplitudes and natural frequencies of the circular plate are obtained by time-average holographic interferometry and laser doppler vibrometer. The vibration modes of the circular plate with the mixed boundary conditions are found from the 1st mode to the 4th mode. The curve shapes of the natural frequency ratios obtained from this study are in a good agreement with other results obtained by numerical analysis. The displacement curves obtained from time average holographic interferometry and laser doppler vibrometer agree well in case of large amplitude, but show a little difference in case of small amplitude.

Identification of System Frequency Variations in Vehicle-Bridge Interaction Systems (교량-차량 동적상호작용을 고려한 시간가변적 시스템 특성 분석)

  • Lee, Jaehun;Lee, Young Jae;Kim, Robin Eunju
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • 제35권1호
    • /
    • pp.23-28
    • /
    • 2022
  • Natural frequency variations in a vehicle-bridge interaction system is examined. The interaction system is designed for a simple beam subject to a moving vehicle. The equation of motion for the system is derived under the quarter-car condition, and numerical simulation is performed. Frequency amplification ratio (FAR) is defined as a ratio between the initial and the varying natural frequency of the system; a discontinuity in the FAR implies a resonance condition. Analysis is mainly focused on patterns, frequency variation characteristics, and discontinuity points of the FAR under the vehicle mass and tire stiffness variations. The result reveals that the interactions between the system affects the natural frequency of both the vehicle and the bridge in similar frequency regions that can be visually identified at the middle of the span using the FAR.

A Study on the Characteristics of Blasting Vibration by Superposition Modeling (중첩 모델링을 통한 발파진동의 특성에 관한 연구)

  • Kang, Choo-Won;Kim, Seung-Hyun;Park, Hyun-Sik
    • Tunnel and Underground Space
    • /
    • 제16권4호
    • /
    • pp.326-333
    • /
    • 2006
  • In this study, the vibration waveform of the single hole which is not interfered from the different blasting holes is separated, the each dominant frequency which is determinated through the Fast Fourier Transform(FFT) is measured. Also the separation waveform executed a superposition modeling which changes to delay time from 1ms to 80 ms in 1ms interval and controls the number of blasting holes from 2 holes to 15 holes in order to investigate the effect of PPV according to the duration time of the vibration and the number of blasting holes. As a result of analysis, the longer the duration time of the vibration, the longer the delay time which is not interfered from the different blasting holes and the effect regarding the number of blasting holes from inside identical delay time did not appear a lot.

A Study on the Obstacle of Acoustic in Judgment Hall Using Improvement (대법원청사 대법정의 음향장해 개선에 관한 연구)

  • 김정중;김용국
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.772-777
    • /
    • 2003
  • 우리나라의 법원청사 법정은 음향적으로 재판에 필요한 관련자의 발언을 청취하고 또한 방청석에도 명확하게 들을 수 있도록 실의 형상과 재료를 선택하여 사용목적에 알맞게 건축음향설계를 하여야 하나 법정이라는 특수한 환경을 도외시하고 거의 예외 없이 음향 전문가의 건축 음향의 기획 검토설계 없이 건축설계자와 시공자에 의하여 설계 건립되었으며 또한 준공된 예술회관과 종교단체의 건물들도 음의 장애현상으로 활용목적을 충족하지 못하는 실정이다. 본 연구는 대법원청사 대법정의 현재의 건축 구조를 본질적으로 유지하면서 재판에 관련된 관련자석과 방청석에서 발생되고 있는 음향 장해현상을 어떻게 개선할 것인가를 연구하기 위하여 대법정의 음향장애 현상을 측정분석을 통하여 주파대역별로 분석하고 건축음향 개선에 필요한 대법정의 실내 흡음력을 산출하여 대법정의 사용목적에 적합하도록 음향 개선설계를 측정 결과치를 중심 개선 방향을 설정하고 음향 시뮬레이션를 통한 음향인자를 (잔향시간, 명료도) 비교 분석 평가 분석한 결과 잔향시간 평균값이 500Hz를 기준으로 1.59대에서 음향설계결과 예측 잔향시간 값이 법정의 권장치인 잔향시간 평균값을 1.1초대로 감소 개선할 수 있는 설계 방안을 제시하였다.

  • PDF

Not Preventive Maintenance, But Predictive Maintenance (예방정비의 필요성)

  • 전형식;글렌화이트
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 한국소음진동공학회 1994년도 춘계학술대회논문집; 영남대학교, 20 May 1994
    • /
    • pp.109-115
    • /
    • 1994
  • 지난 날에는 생산공장 기기들의 정비에 진동분석 이용은 거의 전무한 상태이었으며 과학이 발달된 이 즈음에도 고장이 날 때까지 기기를 혹사하고 고장이 난 후에야 많은 시간과 경비를 들여 기기를 재가동 함은 물론 공장가동 중단으로 인한 생산성 상실이 산업계에 주는 영향은 크다. 경우에 따라서는 기기전체를 교체하는 큰 대형사고로 이어질 수 있기 때문에 공장 전면 조업에 큰 차질을 빚게된다. 시태크(Time tech)와 Re-Engineering과 같은 최첨단 경영방침에 부응하기 위해서는 구태의연한 가동파괴정비나 정기점검 정비방법을 탈피하여 최신 진동분석 기술을 이용한 예방정비(predictive maintenance)를 채택하는 것이 바람직하다. 과학기술 발전에 힘입어 정확한 진동자료를 수집할 수 잇는 주파수분석기(FFT analyzer)나 자료수집기 (data collector)와 진동자료를 심층분석하여 정확한 진동해결방안을 제시할 수 있는 software가 개발되어 사용화 되어 있는바 관계기술 요원들의 진동에 대한 이해와 기술습득으로 한차원 높은 기기정비를 통해 효율적인 생산성증가, 정비비용감소, 안전사고 미연방지등 많은 것을 함께 얻을 수 있다.

  • PDF

Vibration Pattern Editor and Controller for Sound-driven Vibration System (사운드 기반 진동 시스템을 위한 진동 패턴 에디터와 컨트롤러)

  • Oh, Sung-Jin;Cho, Dong-Hyun;You, Yong-Hee;Sung, Mee-Young;Jun, Kyung-Koo
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2008년도 학술대회 1부
    • /
    • pp.564-568
    • /
    • 2008
  • In this paper, we develop a vibration pattern editor and a vibration pad controller for a sound-driven vibration system, which can generate diverse vibration effects in realtime by analyzing signals from the sound output of PC. It consists of a DSP system to analyze the sound, a wrist-wearable vibration pad, and its controller. For the vibration pattern editor, we define four elements to describe the pattern the locations of vibrating elements, start time, duration, and vibration intensity. The editor provides a GUI through which users can create such patterns fast and easily, and store them for reuse. We also propose a pattern-interpreting controller. It is able to interpret patterns created by the editor and control the pad accordingly. It can avoid the need to change the controller firmware whenever desired patterns change.

  • PDF