• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.310-313
• /
• 2006

The present study aims at investigating the effectiveness of a new passive cavity flow control technique, sub-cavity. The characteristics of cavity flow oscillation with the device are compared with those with other control techniques tested previously, including a triangular bump and blowing jet. In the computation, the three-dimensional, unsteady Navier-Stokes equations governing the supersonic cavity flow are solved based on an implicit finite volume scheme spatially and multi-stage Runge-Kutta scheme temporally. Large eddy simulation (LES) is carried out to properly predict the turbulent features of cavity flow. The present results show that the pressure oscillation near the downstream edge dominates overall time-dependent cavity pressure variations, and the amplitude of the pressure oscillation can be reduced in the presence of a sub-cavity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.923-935
• /
• 2007

In general, deflection limit criteria of bridge design specifications would have been considered based on the static serviceability and structural stability. Dynamic serviceability induced from bridge vibration, as a comfort limit, actually has not been included in the criteria. Thus, it is necessary for dynamic serviceability to be considered in bridge vibration problems and for comfort limit on vibration to be needed for evaluating dynamic serviceability of bridges. In this paper, comfort limits of bridge structures considering the time duration exposed by vibration were examined with frequency and time dependent comfort limits, and they were evaluated by using the vibration signals measured from the existing bridges. Therefore, it is resulted that the time-dependent comfort limit considering the duration of vibration is an efficient estimate for evaluating dynamic serviceability of bridges.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.109-115
• /
• 1994

지난 날에는 생산공장 기기들의 정비에 진동분석 이용은 거의 전무한 상태이었으며 과학이 발달된 이 즈음에도 고장이 날 때까지 기기를 혹사하고 고장이 난 후에야 많은 시간과 경비를 들여 기기를 재가동 함은 물론 공장가동 중단으로 인한 생산성 상실이 산업계에 주는 영향은 크다. 경우에 따라서는 기기전체를 교체하는 큰 대형사고로 이어질 수 있기 때문에 공장 전면 조업에 큰 차질을 빚게된다. 시태크(Time tech)와 Re-Engineering과 같은 최첨단 경영방침에 부응하기 위해서는 구태의연한 가동파괴정비나 정기점검 정비방법을 탈피하여 최신 진동분석 기술을 이용한 예방정비(predictive maintenance)를 채택하는 것이 바람직하다. 과학기술 발전에 힘입어 정확한 진동자료를 수집할 수 잇는 주파수분석기(FFT analyzer)나 자료수집기 (data collector)와 진동자료를 심층분석하여 정확한 진동해결방안을 제시할 수 있는 software가 개발되어 사용화 되어 있는바 관계기술 요원들의 진동에 대한 이해와 기술습득으로 한차원 높은 기기정비를 통해 효율적인 생산성증가, 정비비용감소, 안전사고 미연방지등 많은 것을 함께 얻을 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.185-185
• /
• 2004

최근 고속 회전기계에 사용되고 있는 공기호일 베어링은 동압형 기체 베어링으로 매우 안정적이고, 보통의 저널 베어링에서 발생할 수 있는 불안정한 진동을 최소화 할 수 있는 장점을 가지고 있다. 또한 높은 안정성 및 축 자체에 자동 조절 기능을 가지고 있어서 극저온 기계 및 고속 회전기계에 널리 사용되고 있다. 이러한 고속 회전기계는 축의 기동 및 정지 시, 위험속도를 안전하게 통과하기 위해 위험속도에서의 진동을 억제하여야 하고, 운전 가능한 회전수를 증가시키기 위해서 로터 시스템의 동적 해석이 필요하다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.86-92
• /
• 2017

The possibility to development of floor vibration problem is larger in case of long span structure under service loads. Therefore, to improve the vibration performance of the floor, increasing of its thickness is a common method. But, increasing of thickness can lead to increase of slab self weight and reduce the effectiveness of the building. For this reason, attention for voided slab which reduces the self-weight is increasing. Hence, voided deck slab combined with deck plate and polystyrene void foam which has buoyancy prevention capacity and much developed construct ability has bee developed. By using the developed voided slab, vibration performance of a mock-up building structure has been investigated in the current study. The results according to analysis showed that they can be implemented in living and bedroom which are considered as 1st grade on the basis of "Residential Evaluation Guidelines for Vibration of Buildings" by the Architectural Institute of Japan.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.136-140
• /
• 1992

가전 제품을 비롯한 전기/전자 제품의 고부가가치화를 위해서는 제품 사용 환경의 쾌적함에 저해되는 요인인 진동소음의 발생을 최대한 억제하여야 한 다. 본 연구에서는 진동으로 인하여 발생하는 소음의 저하를 위한 연구의 일 환으로 부분 구조합성법을 이용하여 설계된 제품의 진동특성을 파악하고 진 동을 저하하기 위한 연구를 냉장고를 대상으로 수행하였다. 방진 마운트와 콤프레서 지지판의 최적 설계에 의하여 진동 및 소음의 저하에 기여함으로 써 적용한 연구 방법의 적합성이 인정되었으며 향후 다른 전기 전자 제품의 진동 소음 제어에도 기여할 수 있을 것으로 생각된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.630-633
• /
• 2001

This paper propose electronic speckle pattern interferometry(ESPI) for reliability evaluation of electronic device. Especially, vibration problem in a fan of air conditioner, motor of washing machine and etc. is important factor to design the devices. But, it is difficult to apply previous method, accelerometer to the devices with complex geometry. ESPI, non-contact measurement technique applies a commercial fan of air conditioner to vibration analysis. Vibration mode shapes, natural frequency and the range of the frequency are decided and compared with that of FEM analysis. In mechanical deign of new product, ESPI adds weak point of previous method to supply effective design information.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.334-339
• /
• 2019

In this study, the vibration test method to nondestructively evaluate the possibility of vehicle BSR (Buzz, Squeak, Rattle) noise generation in spot-welded structures was proposed. The weld quality was predicted by analyzing the local vibration transmission characteristics for the beam-shaped structure attached to testing spots. The bending stiffness was evaluated from the identified vibration properties. From the change in the stiffness, the weld quality was evaluated. For verification of the proposed method, the welded specimens were fabricated with partial changes in welding parameters. The local vibration transfers were measured. The frequency bands affected by the weld quality was identified. The capability of evaluating the welding parameters including defect position and quality variations was investigated. The proposed method enables fast quality evaluation to minimize the possibility of BSR noise generation in the manufactured vehicle.

• Journal of KSNVE
• /
• v.25 no.1
• /
• pp.33-37
• /
• 2015

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.