• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.100-107
• /
• 2013

This study aims to improve the heat performance of motor cycle disk due to the number of holes by analyzing 6 kinds of disk models. This disk performance depends on the efficiency at emitting the heat. To raise the efficiency of heat emission, holes with circle or another configuration are made on disks to emit heat fast. The distribution of temperature, heat flux, deformation and stress are analyzed. As the number of holes on disk increases, the performance of heat emission is improved. Equivalent stress is decreased and durability is improved as the number of holes on disk increases. Though the number of holes on disk is increased, the performances of heat emission and durability do not become better. The optimal model can be found by comparing models each other through this analysis result. Through this study result, the configuration of motor cycle disk is designed with optimal heat emission and durability by comparing models.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.427-433
• /
• 2011

Chassis part in automotive body is affected by fatigue load at driving on the ground. Universal joint on this part is influenced extremely by the fatigue load. Fatigue life, damage and natural frequency are analyzed at universal joint under nonuniform fatigue load. The york part at universal joint is shown with the maximum equivalent stress and displacement of 60.755 MPa and 0.21086 mm as strength analysis. The possible life in use in case of 'SAE bracket' is the shortest among the fatigue loading lives of 'SAE bracket', 'SAE transmission' and 'Sine Wave'. The damage at loading life of 'SAE transmission' is the least among 3 types. The frequency of damage in case of 'Sine Wave' is 0.7 with the least among 3 fatigue loading life types but this case brings the most possible damage as 80% at the average stress of 0. Natural vibration at this model is analyzed with the orders of 1'st to 5'th and maximum frequency is shown as 701.73 Hz at 5'th order. As the result of this study is applied by the universal joint on chassis part, the prevention on fatigue damage in automotive body and its durability are predicted.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.126-134
• /
• 2014

This study investigates the structural strength analysis due to rib thickness of lower arm. At structural analysis, model 1 has the most deformation by comparing three models. As most equivalent stress is shown at the part connected with wheel knuckle, the strength becomes weaker in cases of three models. At fatigue analysis, model 1 becomes most unstabilized among three models. Model 3 has most fatigue life and the next model is model 2. The range of maximum harmonic response frequencies becomes 140 to 175Hz in cases of three models. Because the critical frequency at model 3 becomes highest among three models but the stress exceeds yield stress, model 3 becomes most unstabilized at vibration durability. As models 1 and 2 has less than yield stress, these models become stabilized. Model 2 becomes most favorable by comparing three models at structural, fatigue and vibration analyses. This study result can be effectively utilized with the design of lower arm by investigating prevention against damage and its strength durability.

• 한국전산구조공학회논문집
• /
• 제33권4호
• /
• pp.209-216
• /
• 2020

본 논문에서는 CR 쉘 요소 해석 기법을 활용하여 모터사이클 후방프레임의 해석을 수행하였다. CR 쉘 요소 해석기법은 적은 요소수에서 NASTRAN보다 빠르게 수렴하는 결과를 보여주었다. 후방프레임은 수직 방향에 대해 실 주행 조건 시 엔진 RPM과 근접한 고유진동수를 가짐을 보여주었다. 2가지 설계변수를 반영한 세 가지 경우에 대한 해석이 제시되었으며, 보강용 자재는 동일한 중량 변화 내에서 두께 변화에 비해 더 유용한 수단임을 확인할 수 있었다. 본 연구의 구조 해석은 차후 모터사이클 후방프레임의 내구성을 향상하는 설계 개선 연구에 효과적으로 활용될 수 있다.

• 한국융합학회논문지
• /
• 제6권6호
• /
• pp.279-284
• /
• 2015

항공기의 추력으로 구동되는 추진축의 회전운동에서 발생되는 진동은 추진축의 수명에 큰 영향을 끼친다. 그리고 회전중 추진축에서 피로파괴가 발생하게 될 시에, 막대한 인명피해를 야기하게 된다. 비행환경에 따라 다양한 회전에 놓이게 되는 추진축에서 떨림이 발생한다. 따라서 이러한 피로파괴가 우려되는 추진축 부위를 본 논문에서는 해석적 연구를 통해 사전에 파악함으로서, 파손방지를 위한 그 내구성이 향상되고 근간된 안전설계를 토대로 융합기술에 접목하여 그 미적인 감각을 나타낼 수 있다.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.868-874
• /
• 2011

본 논문은 분해능이 향상된 인덕티브 방식 토크 센서의 새로운 구조를 제안한다. 토크 센서의 결합 구조와 수신 코일의 감김 수를 변화시켜 분해능을 증가시켰다. 이 토크 센서는 비접촉식으로 마모가 없기 때문에 내구성이 높으며, 진동이나 기구의 비틀림 등에 의한 편차가 적고, EMC(Electromagnetic Compatibility) 및 온도 특성이 우수하다.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.122-129
• /
• 2012

This study investigates structural and vibration analyses according to the thickness of bicycle frame tube. The model of bicycle frame has the dimension as length of 862mm, width of 100mm and hight of 402.5mm. There are 3 kinds of models with tubes of top, down and seat at bicycle frame as thicknesses of 10, 15 and 20mm. The maximum displacement and stress occur at the center part of seat stay and at the installation part of rear wheel respectively. Maximum displacements become 0.031936, 0.029159 and 0.027984mm in cases of thicknesses of 10, 15 and 20mm respectively. In case of thickness of 20mm among 3 cases, maximum displacement becomes lowest. But maximum stresses become 10.019, 8.5492 and 9.2511MPa in cases of thicknesses of 10, 15 and 20mm respectively. In case of thickness of 15mm among 3 cases, maximum stress becomes lowest. There is no resonance at practical driving conditions and natural frequency remains almost unchanged along the change of thickness. In case of the displacement due to vibration mode, the displacement difference at thickness between 15mm and 20mm becomes 1/2 times than that between 10mm and 15mm. Design at bicycle frame tube becomes most economical and durable effectively in case of thickness of 15mm among 3 cases.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.334-334
• /
• 2010

반도체 소자 제조 공정에 사용되는 공정 펌프는 전체 소요되는 에너지(소비전력)에 52%를 소비하고 있다. 이러한 이유 때문에 반도체 fab 내에서 에너지 절감을 논의할 때 항상 공정용 진공 펌프가 1 순위에 오를 수밖에 없는 것이다. 반도체 공정용 진공 펌프는 사용되어지는 공정에 따라 유지되는 진공도가 달라지고 이에 따라 소비전력과 투입되는 utility의 양이 바뀌게 되어 진공도와 공정에 따른 에너지 소비의 pattern이 다르다. 한국표준과학연구원 진공센터에서는 각 공정 대응용 펌프의 종류에 따라 배기속도, 도달진공도, 소비전력, 진동, 소음 등 기본 펌프 성능 평가, light gas인 helium에 대응하는 기본 성능평가를 실시하고 있다. 또한 부가적으로 soft/medium 공정용의 경우 저전력 mode의 소비전력의 진공도에 따르는 측정변수의 pattern을 측정/분석하고 있으며, harsh 공정용의 경우 50~300 slm의 유량 주입에 따른 내구성 특성을 monitoring하고 있다. 드라이펌프의 기본적인 평가 성능과 각 회사의 SPM (single pump monitoring system) 측정 변수인 온도, 배기구 압력 변화 등의 자체 진단 인자를 포함하여 반도체 공정에서 드라이 펌프의 운용에 필요한 냉각수, $N_2$, 등과 같은 utility의 사용량 및 온도변화 등을 측정하여 드라이 펌프의 에너지 소비 pattern을 분석하고자 한다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.33-41
• /
• 2019

This study presents the development of a lifetime test bench for the strain wave reducer which is a precision gear reducer of the robot to realize fault diagnosis and failure prognostics. To this end, the lifetime test bench was designed to detect the vertical forward/reverse direction rotation load. Through the lifetime test bench, it is possible to apply the same load spectrum from robot working scenarios. We developed a data integration gateway for fault data collection. Through the development of dedicated software for fault diagnosis and failure prognostics, these data from vibration, noise and temperature sensors were collected and analyzed along with the operation of the lifetime evaluation.