• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.509-516
• /
• 2007

Mathematical modeling and vibration control of a tiltrotor aircraft composite wing-rotor system are investigated in this study. A wing-mounted rotor can be tilted from the vertical position to a horizontal one, and vice versa. Effect of vibration control of the wing-rotor system via piezoelectricity is studied as a function of tilt angle, ply angle of composite wing and rotor's spin speed. Composite wing is modeled as a thin-walled box beam having a circumferentially uniform stiffness configuration that produces elastic coupling between flap-lag and between extension-twist behavior. Numerical simulations are provided and pertinent conclusions are outlined.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1028-1035
• /
• 2007

this study, forced vibration analysis was performed on the composite main wing structure of a small scale WIG craft which is equipped two-stroke pusher type reciprocating engine. The structural vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the H-mode(horizontal mode), the V-mode(vertical mode) and the X-mode(twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the L-mode(longitudinal mode) with the oscillating propeller thrust which occurs.

• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.102-106
• /
• 1991

최근의 사회적 경제적인 급속한 발전에 따라 환경 소음에 대한 사람들의 관심도가 점차 증가되고 있다. 이로 인하여 사람들이 항상 접촉하게 되는 가전 제품 에 대한 소비자의 욕수도 제품의 성능적인면도 물론이지만 소음진동 및 디자인에 대하여도 지대한 관심이 모아지고 있다. 가전 제품에 있어서 주된 소음원은 홴 및 압축기 덮개의 진동등으로 파악할 수 있다. 특히, 홴은 냉각용, 송풍용으로서 거의 모든 가전제품에 쓰여지고 있다. 냉각용으로 사용되는 형식은 주로 축류 홴이다. 축류 홴은 다른 종류보다 소음이 크기 때문에, 저소음 축류 홴의 BPF(Blade Passing Frequency; 날개 통과 주파수)가 갖는 소음 특성을 연구하여야 한다. 이를 위해 축류 홴의 날개 갯수를 조절하면 설치된 통내에서의 BPF가 어떠한 형태로 변화하는가를 알아보고, 이에 따른 저소음화 대책을 검토하고자 한다. 홴은 그 덮개에 대하여 유량 및 소음에 관한 최적의 위치가 존재하는데, 문이 잠겨 있을 때에는 그 소음 레벨의 편차가 몹시 크게 된다. 한편 날개 갯수, 모터의 회전속도 및 통의 전달 함수 등을 감안하여 날개 통과 주파수(BPF)를 조정하면, 각종 가전 제품의 홴에 의한 방사를 저감시킬수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.905-911
• /
• 2011

With the progress of micro actuator technology, studies on the development of micro air flapping wing vehicles are actively undergoing. In the present study, the changes of both lift and thrust characteristics of the wings are investigated using a boundary element method. Lift of the heaving wing is not generated when the wing is beating with smaller frequencies than 1 Hz. Thrust increases with amplitude and frequency. As the wing's taper and aspect ratios increase, both lift and thrust also increase. Results on the pitching oscillation and flapping motion will be included in the future work.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.59-64
• /
• 1994

A study was conducted to investigate the propeller singing place of an 86, 000 ton Deadweight Crude Oil Tanker. In preliminary study, proper use of finite element analysis was verified by comparing with the result of hammering test in the air. Then the finite element analysis was carried out for the blade in the water and compared with the noise measurement during sea trial, which enabled to confirm the local resonances of blade structure. Result of the study showed that the singing occurred most probably at trailing edges on the blade tip over 95% of propeller diameter. Owing to edge cutting of a successfoul remdial action, the singing excitation forces seemed to be reduced whereas the vibration characteristics of the blade was not changed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.217-221
• /
• 2007

In this study, forced vibrations analysis was performed for main wing of small scale WIG vehicle which is equipped two-stroke pusher type propeller engine, in terms of structural. for the frequency response analysis, excitations were assumed by H-mode(Horizontal mode), X-mode(Twisted mode) which is main vibration mode of engine, and for the transient response analysis, excitations were assumed by L-mode(Longitudinal mode) with propeller thrust which is occurred when it revolution.

• Journal of KSNVE
• /
• v.17 no.5
• /
• pp.27-32
• /
• 2007

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.7-12
• /
• 2007

Previously study on structural design of the main wing of the twenty-seat class WIG (Wing in Ground Effect) craft. In the final design, three spars construction was selected for safety in the critical flight load, and the Carbon-Epoxy material was selected for lightness and structural stability. In this study, the forced vibration analysis was performed on the composite main wing structure of the twenty-seat class WIG craft with two-stroke pusher type reciprocating engine. The vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the Y-mode (lateral mode), the Z-mode (vertical mode) and the $M_{xyz}$-mode (twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the X-mode (longitudinal mode) with the oscillating propeller thrust which occurs in operation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.270-275
• /
• 1995

본 논문에서는 3자유도를 갖는 2차원 강체날개의 플러터 속도를 향상시키는 축차 제어기를 설계하는 기법을 연구하였다. 먼저 2차원 강체날개의 운동방정식을 유도하고 플러터 해석을 수행하였다. 다음 수동계의 플러터 속도를 향상시키는 능동제어기를 설계한 후 제어기의 차수를 축차하는 기법을 적용하여 저차의 능동제어기를 구성하였다. 제어기 축차기법으로는 BACR을 사용하였으며 전차 제어기의 상태변수를 약 80%정도 줄일 수 있다. 축차된 제어기를 사용한 능동시스템과 전차 제어기를 사용한 능동시스템의 제어효과의 차이는 무시 할 수 있을 정도로 매우 작다. 따라서, BACR을 사용하여 얻은 축차된 제어기를 사용하면 상당한 계산량 감소효과와 실시간 단축효과를 얻을 수 있음을 확인하였다. 또한 동일한 돌풍입력에 대한 각각의 능동 시스템의 시간응답도 매우 양호한 결과를 얻을 수 있었으며, 전차 제어기를 사용한 능동시스템의 돌풍응답과 축차된 제어기를 사용한 능동시스템의 돌풍 응답 사이의 차이도 매우 작게 나타났다. 그러므로, 항공기 날개의 능동 플러터억제에는 BACR을 이용하여 설계한 축차된 제어기가 플러터 능동제어에 매우 유용하다고 할 수 있다. 그러나 BACR을 사용하기 위해서는 요구되는 정확도와 계산량에 대한 상호 절충과정이 반드시 필요하다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.919-926
• /
• 2011

The fin of high speed air vehicle is composed of skins and strong skeletons. In the flutter analysis, the eigenmodes of a fin are used for evaluating the unsteady aerodynamic force and the modal approach is applied for solving the flutter equation in both time and frequency domain. Therefore, the proper eigenmodes used for a modal flutter analysis should be chosen. For the appropriate choice of eigenmodes, when there exist local modes of a skin in the high modes, the effects of those modes on the unsteady aerodynamic force and flutter characteristics are anlalyzed.