• Journal of KSNVE
• /
• v.20 no.3
• /
• pp.13-19
• /
• 2010

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.208-209
• /
• 2002

지금까지의 광학적 비접촉 진동 측정 시스템에서는 레이저도플러 효과를 이용하고 있다(1)(2). 그러나 이는 시스템 자체가 너무 크고 많은 장비들을 요구하는 단점을 가지고 있다. 본 실험은 장비의 속도와 크기를 개선하기 위해 이전까지의 방법과는 다른 시스템을 구성하여, 빠르게 회전하거나 진동하는 물체의 진동을 쉽고 간결하게 측정할 수 있는 장비와 프로그램을 설계, 제작하였다. 광원으로는 파장이 650nm인 LD(laser diode)를 사용하였고, 신호검출에는 1차원 PSD(position-sensitive detection)를 사용하여 시스템을 소형으로 구성하였다. (중략)

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.335-343
• /
• 2024

This paper came up with the theoretical modelling of the metrology for the acoustic power using ultrasonic radiation force and showed some theoretical results. In order to do this, a scattering model for a rigid circular cone based upon the Kirchhoff approximation was made, which was followed by the calculation of acoustic power, and then, was converted to the radiation force. From these works, it provided the accuracy and limitation of the conventional method using a circular cone, and the expanded metrology modelling that can be applied to a circular cone with arbitrary apex angle. Using these, this study provided the dependence of the metrology for the acoustic power using ultrasonic radiation force on the frequency and the size of the target. As a result, the correction was yielded in the value of the acoustic power calculated by the suggested International Electrotechnical Commission (IEC) method, which needs to be added when the frequency and the size of the target was considered.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.84-92
• /
• 2014

In this study, vibrational tendon tension measurement methods are applied to estimate tension of external tendons used in segmental post-tensioned bridges. The acceleration of various length type of tendons is measured and natural frequencies are obtained using FFT (Fast Fourier Transform). The obtained natural frequencies are within 1% error regardless of sensor direction and location. On the basis of natural frequency of tendon, estimation of the tendon tension is performed by using many types of solutions such as string theory equation, multi mode estimation, practical formula estimation and stiff string with clamped-clamped boundary conditions. The results are compared with each other and have shown that the flexural stiffness is not negligible in tendons of this type causing the vibration mode to be inharmonically related. The results have shown that the method using stiff string equation with clamped-clamped boundary conditions is more accurate than the other methods. Application example of in-service bridges has shown that force distribution effects from friction at deviation blocks can be effectively detected.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.25-33
• /
• 2004

In this paper, we briefly introduce the micro-vibration test bench of KARI and the test and analysis method of RWA(Reaction Wheel Assembly) micro-vibration. The micro-vibration of RWA is measured on a KISTLER dynamic plate which can measure the time signal of 6 DOF simultaneously up to 400Hz. Measured data are extensively evaluated with respect to the wheel spin rate to identify the complicate wheel dynamic characteristics, and the static/dynamic unbalances are estimated from the extracted first harmonic component as a part of evaluation process. The estimated static and dynamic unbalances. 0.79gcm and 17.4gcm² respectively. The structural resonance mode and two rocking modes observed as a results of its frequency analysis. Several higher order harmonic components observed, which come from its rotor shape as well as the wheel bearing characteristics.

• Journal of KSNVE
• /
• v.12 no.2
• /
• pp.103-112
• /
• 2002

인간이 도구를 사용한 이래 진동과 충격의 인체 피폭은 점진적으로 증가되었으며, 산업 혁명의 부산물인 동력기관을 이용하는 육-해-공 운송수단의 20세기 발전은 인체진동 피폭의 급격한 증대를 수반하였다. 자동차를 포함한 운송수단은 21세기 우리생활의 필수품으로 확고한 자리를 잡을 것이 확실시된다. 우리 주변의 수많은 진동 발생원들과 이에 직간접적으로 노출되어있는 현대인의 생활은 진동에 대한 새로운 이해와 접근방법의 개척을 요구하여 새로운 공학분야를 잉태하였다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.98-106
• /
• 2024

Due to advancements in construction technology and analytical tools, an increasing number of cable-stayed bridges have been designed and constructed in recent years. A cable is a structural element that primarily transmits the main load of a cable-stayed bridge and plays the most crucial role in reflecting the overall condition of the entire bridge system. In this study, a vision-based method was applied to estimate the tension of the stay cables located at a long distance. To measure the response of a cable using a vision-based method, it is necessary to install feature points or targets on the cable. However, depending on the location of the point to be measured, there may be no feature points in the cable, and there may also be limitations in installing the target on the cable. Hence, it is necessary to find a way to measure cable response that overcomes the limitations of existing vision-based methods. This study proposes a method for measuring cable responses by utilizing the characteristics of cable shape. The proposed method involved extracting the cable shape from the acquired image and determining the center of the extracted cable shape to measure the cable response. The extracted natural frequencies of the vibration mode were obtained using the measured responses, and the tension was estimated by applying them to the vibration method. To verify the reliability of the vision-based method, cable images were obtained from the Hwatae Bridge in service under ambient vibration conditions. The reliability of the method proposed in this study was confirmed by applying it to the vibration method using a vision-based approach, resulting in estimated tensions with an error of less than 1% compared to tensions estimated using an accelerometer.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.80-85
• /
• 2019

Generally, interlayer noise is measured in decibels (A) in terms of free field. In this paper, we propose a measurement method of interlayer vibration acceleration in the diffusion field perspective. The proposed method can represent a vibration-embodied formula similar to the sensitivity of earthquake intensity when the natural vibration of apartment house is measured by acceleration with its average value of $20mm/s^2$ represented by an the geometric progression of radix. Based on this theory, this paper proposes a method to show the optimal user experience (UX) by applying the interlayer vibration acceleration of the epicenter to the system of human - computer interaction (HCI).

• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.95-101
• /
• 1991

가전제품의 고부가가치를 위해서는 제품의 기본성능 충실화와 함께 소음진동 의 발생을 최대한 억제하여야 한다. 소음진동의 제어는 소음진동을 일으키는 원인에 대한 특성을 파악하고 최적의 소음진동방지 대책을 제시함으로서 효과를 얻을 수 있다. 국내의 가전 3사와 학계는 산학협동연구를 통한 제품의 고부가가치화를 위한 소음진동 제어 연구 활동이 활발히 진행되고 있으며, 본 글에서는 가전제품중 다양한 소음 특성을 갖고 있는 냉장고의 경우 진동에 의한 소음 제어 방법으로 진동 전달 특성 변경이 유효한 방법임을 제시 하고자 한다. 가전제품의 소음진동의 발생은 주로 홴등에 의한 유체유동 소음특성과 기계 구조물의 진동에 의한 소음 특성을 모두 갖는 냉장고에 대하여 알아보았다. 연구방법으로 Sound Intensity법과 가속도 측정법을 이용하여 진동의 전달 경로를 파악하고 냉장고의 압축기 진동에 의한 소음 제어의 대책을 제시하였다.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.14-19
• /
• 2001

The estimation of proper prediction method and the transformation method of environmental regulation standard were carried out by measuring blasting vibration. Vibration velocity was more adequate than vibration level in the blasting design by scaled distance. Thus, design and construction mutt be controlled by vibration velocity, and it is required that the vibration velocity is transformed to vibration level to meet regulation standard. Three transformation methods were studied. First, transformation formula is derived from the shock vibration data only. The second method it the transformation by correlation equation of vibration velocity and vibration level measured at the same time. The last one is the transformation of vibration velocity by FFT. It seems to be difficult to estimate damages by these methods because that every method shows considerable error. But transformation formula of PPV component to vibration level was most practical.