• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.726-734
• /
• 2007

구조물에 손상이 발생하면 구조물의 강성변화로 구조물의 고유진동수에 변화가 발생하게 된다. 실험을 통해 얻을 수 있는 손상 전 구조물의 고유진동수와 해석적 방법을 사용하여 구하는 고유진동수가 같다고 가정하고 해석적인 방법으로 손상전후 고유진동수비를 구하여 3차원 그래프로 표시하였다. 손상이 한 부위에 존재할 경우 진동실험으로 구한 고유진동수비를 고유진동수비 그래프와 비교하여 손상의 위치, 크기 및 방향을 알 수 있었으나 여러 지점에 손상이 발생할 경우에는 손상을 파악하기 위해 고유진동수비 그래프 외에 주파수 응답함수를 병행하여 사용하였다.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.123.1-123.1
• /
• 2009

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.121-124
• /
• 1998

수중에서 발생된 기포에 음파가 입사되었을 때, 입사된 음파는 물 속의 기포들에 강제적인 진동을 주어 새로운 음원으로서 활동하게 한다. 이런 경우 기포의 진동은 비선형적인 진동 특성이 강하게 나타나게 되어, 기포는 입사된 음파에 의존하는 비선형 인자로서 작용하게 된다. 본 논문에서는 수중에 발생되는 기포층의 비선형응답 및 다른 형태의 응답을 실험적으로 고찰하기 위하여, 인위적으로 제작된 기포 발생장치를 이용하여 발생된 기포층에 음파를 입사하였다. 이때 입사된 음파는 기포들과의 상호작용을 인하여 여러 가지 응답을 나타내었으며, 비선형 응답으로써 배진동 세기의 현저한 증가와 합주파수 음파 발생 등이 두드러지게 나타났다. 또한 개개 기포의 공진 주파수 근처에서는 물론, 그보다 높은 고주파수에서도 합주파수 형태의 비선형응답이 매우 특징적으로 관찰되었다.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.132-139
• /
• 2021

The response characteristics of the forced vibration generated when the high-damped vehicle pass the bumped barrier was studied, and in particular, the response behavior of displacement, velocity and acceleration was analyzed for the forced vibration model. In addition, in order to obtain responses such as displacement, velocity, and acceleration, a numerical analysis technique of the Runge-Kutta-Gill method was performed in time domain. The response was successfully obtained in detail under several high damping conditions. As a numerical analysis result, the response of the vehicle was obtained by considering the vehicle body to which the impulse impact was applied. Also, the analysis result was compared with the experimental result in order to verify the validity of vehicle model. The amplitude and natural frequency of the vehicle were considered and analyzed. The Nyquist diagram of the vehicle model was also obtained and the relationship could be analyzed. And the vibration response was analyzed on different mass, damping and stiffness.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.5 s.51
• /
• pp.63-71
• /
• 2006

In seismic response analysis of building structures, the input ground accelerations have considerable effect on the nonlinear response characteristics of structures. The characteristics of soil and the locality of the site where those ground motions were recorded affect on the contents of earthquake waves. Therefore, it is difficult to select appropriate input ground motions for seismic response analysis. This study describes a generation of artificial earthquake wave compatible with seismic design spectrum, and also evaluates the nonlinear response spectra by the simulated earthquake motions. The artificial earthquake wave are generated according to the previously recorded earthquake waves in past earthquake events. The artificial wave have identical phase angles to the recorded earthquake wave, and their overall response spectra are compatible with seismic design spectrum with 5% critical viscous damping. Each simulated earthquake wave has a identical phase angles to the original recorded ground acceleration, and match to design spectra in the range of period from 0.02 to 10.0 seconds. The seismic response analysis is performed to examine the nonlinear response characteristics of SDOF system subjected to the simulated earthquake waves. It was concluded that the artificial earthquake waves simulated in this paper are applicable as input ground motions for a seismic response analysis of building structures.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.4 s.18
• /
• pp.101-108
• /
• 2005

The investigations for mitigating wind-induced excitations of tall buildings have been carried out. The aerodynamic modification of a building shape changing the cross-section with height through tapering, which alters the flow pattern around the building, could reduce wind induced excitations of tall buildings. The fart that a tapered tall building might spread the vortex-shedding over a broad range of frequencies makes more effective for reducing acrosswind responses has been established. In this paper, to investigate the tapering effect for reducing wind-induced responses of a tapered tall building, high-frequency force-balance test was conducted. The six types of building models which have different taper ratio of 2.5%, 5%, 7.5%, 10%, 15% and one basic building model of a square cross-section were tested under the two typical boundary layers representing suburban and urban flow environment. The effect of wind direction was also considered.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.79.1-79.1
• /
• 2010

본 연구에서는 케이슨식 방파제 구조물에 대하여 기초마운드의 잠재적인 손상 모니터링에 관한 연구를 수행하였다. 이를 위해 첫째, 케이슨식 방파제 기초마운드의 이상 상태 여부를 판단하기 위하여 진동응답 분석기법을 선정하였다. 둘째, 선정된 기법에 의한 손상 예측 가능성의 검증을 위하여 케이슨식 방파제의 구조모형을 제작하였다. 셋째, 모형케이슨에 대한 유한요소 모델 생생하여 기초마운드의 손상에 따른 진동응답을 분석하였다. 마지막으로, 모형케이슨에 대한 진동실험을 통하여 기초마운드의 손상 예측을 수행하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.29-33
• /
• 2007

최근의 반도체/display 관련 생산장비 및 검사장비들이 대형화/고속화 되어감에 따라 과거 stepping 방식에서 scanning 방식으로 전환된 장비들이 공정 상에 발생하는 과도응답 형태의 진동으로 인하여 제품 수율의 저하와 생산 효율의 감소를 가져오고 있다. 이러한 과도응답의 진동은 장비 자체의 가진력으로부터 발생하므로 건물 구조의 동강성 증대 방안이나 고효율의 방진 시스템 적용으로는 한계를 가지고 있다. 본 논문에서는 smart 재료인 MR유체를 이용한 MR damper를 이용하여 방진효율을 유지하면서 과도응답의 진동을 제어하기 위한 반 능동제어 방식의 방진/제진 시스템을 구성하였으며, 시스템 해석과 제어 시스템의 구성을 위하여 6자유도 강체 진동에 대한 운동방정식을 고려하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.59-66
• /
• 2011

In this study, the vibration serviceability of pedestrian by travelling vehicles on the cable-stayed bridge with concrete tower was studied. Experiment variables were considered travelling speed of vehicles, pavement state of asphalt on the deck and weight of vehicles, preferentially. Especially, pavement grade states were considered by A and C grades by BMS (Bridge Management System) standard. The incremental ratio extent of vibration acceleration responses, asphalt pavement grade C over A, was construed to 1.23~1.43. Only, these results are valid within extent of the Scaled-Weight 228.0~1161.9 km/h kN. The vibration equations for acceleration responses prediction of bridge deck were proposed into three types, reliability 50%, 90%, 95% respectively. These equations can consider asphalt pavement grade, and the vehicle's weight and travelling velocity, which are the source of vibration, are combined into the term called, 'Scaled Weight'.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1028-1035
• /
• 2007

this study, forced vibration analysis was performed on the composite main wing structure of a small scale WIG craft which is equipped two-stroke pusher type reciprocating engine. The structural vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the H-mode(horizontal mode), the V-mode(vertical mode) and the X-mode(twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the L-mode(longitudinal mode) with the oscillating propeller thrust which occurs.