• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.130-135
• /
• 2007

The purpose of this paper is that investigates the Natural Frequency behavior characteristic of wind turbine jacket type tower model, and calculated that the stress values of thrust load, wave load, wind load, current loda, gravity load, etc., environment evaluation analysis during static operating wind turbine jacket type tower model, carried out of natural frequency analysis of total load case to stress matrix, frequency calculated that calculated add natural frequency to stiffness matrix for determinant to stress results. The finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.1 s.118
• /
• pp.3-9
• /
• 2007

In this paper, a numerical case study is carried out on the hydroelastic vibration of rectangular plate with various fluid field. It is assumed that the tank wall is clamped along the plate edges. The VMM(virtual mass method) of Nastran is used for the simulation of fluid domain and calculating natural frequency of fluid-coupled structure. In this paper, natural frequencies are calculated and compared for rectangular plates with various fluid field such as infinite fluid and finite fluid, length change of finite fluid field and various fluid contacting conditions.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.89.2-89.2
• /
• 2010

고속도로에서 주행속도가 높아지게 되면, 도로의 노면 상태에 따라 차량의 안전과 쾌적한 운전자의 환경이 변화될 수 있다. 이처럼 도로의 노면 상태를 결정하는 주된 인자는 도로의 평탄성과 소성변형에 의한 노면의 요철이라고 할 수 있다. 평탄하지 못한 도로를 자동차가 고속으로 주행하게 되면, 자동차의 속도에 의한 도로와의 마찰이 발생하여 자동차에는 매우 큰 흔들림이 발생하게 된다. 또한, 도로의 경우에도 자동차의 차축과 도로면에서 발생하는 충격에 의해 미세한 진동이 발생하게 된다. 그리고 광섬유 브래그 격자(FBG)센서는 외부에서 작용하는 매우 미세한 물리량에 의한 변화의 측정이 가능한 매우 우수한 계측 센서로 사용이 가능하기 때문에 온도보상형 광섬유진동센서를 제작하였고, 이를 고속도로 포장면의 평탄성 모니터링에 활용하고자 하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.791-794
• /
• 2010

고속도로에서 주행속도가 높아지게 되면, 도로의 노면 상태에 따라 차량의 안전과 쾌적한 운전자의 환경이 변화될 수 있다. 이처럼 도로의 노면 상태를 결정하는 주된 인자는 도로의 평탄성과 소성변형에 의한 노면의 요철이라고 할 수 있다. 평탄하지 못한 도로를 자동차가 고속으로 주행하게 되면, 자동차의 속도에 의한 도로와의 마찰이 발생하여 자동차에는 매우 큰 흔들림이 발생하게 된다. 또한, 도로의 경우에도 자동차의 차축과 도로면에서 발생하는 충격에 의해 미세한 진동이 발생하게 된다. 그리고 광섬유 브래그 격자(FBG)센서는 외부에서 작용하는 매우 미세한 물리량에 의한 변화의 측정이 가능한 매우 우수한 계측 센서로 사용이 가능하기 때문에 온도보상형 광섬유진동센서를 제작하였고, 이를 고속도로 포장면의 평탄성 모니터링에 활용하고자 하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.165-172
• /
• 2003

This study aims to find frequency weighting curves for the evaluation of drivers' discomfort by vertical and rotational steering wheel vibration. Equal sensation curves, inverse of frequency weighting curves, were determined for the two kinds of vibrations respectively by using the sinusoidal signals with reference amplitudes from 0.2 to 0.4 m/s2 in the frequency range from 5 to 100 ㎐. Twelve subjects joined at the tests, and median values of the twelve judgments were used to determine the equal sensation curves. An experiment was followed to compare the relative sensation magnitude between the two kinds of equal sensation curves, which showed discomfort by the rotational vibration was 1.5 times of that by the vertical vibration at 50 ㎐.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.351-357
• /
• 2007

We have compared a special character(pressure of explosion, gas volume, energy of explosion, temperature of explosion, strength) of different three emulsion explosives which is different velocity by Nitrodyn program that is calculated explosion reaction. We have analyzed the character of the vibration from a vibration data which is a result from test blasting in different velocity of detonation for three emulsion explosives of the same size(17mm) in the same rock. As a result, the vibration is decreased when the velocity of detonation is decreased within 40m from origin of explosion but it is familiar character over 40m, so there isn't much affect the velocity of detonation in decreased vibration over 40m.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.404-411
• /
• 2005

To increase accurateness and reliability of the evaluation of power tool vibration transmitted to an operator, it is necessary to measure the grip and feed forces during the measurement of hand-transmitted vibration. In the study a system was invented to measure the vibration and the grip and/or feed force, which consists of a measurement handle and a PC with a data acquisition system and the corresponding software. Strain gauges and an accelerometer were mounted on the handle surface for the simultaneous measurement of the forces and the vibration. The program in the system makes it possible to monitor the grip and feed force during the tool operation so that the operator keeps the applying forces within the pre-determined range. Investigating the vibration total values, frequency-weighted root-mean-square accelerations at the handle, obtained in repetition for each power tool with control of the grip and feed force showed more consistency than those measured without force control. By using the system the experimenter can reduce random error of the measured vibration.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.185-193
• /
• 1997

A major problem of frequency analysis in the field of low-frequencies such as building or construction vibration is the way of signal processing which is appropriate to obtain included frequency content from the finite process to be measured. Therefore, it is the aim of the investigation reported herein to develop the signal processing algorithm which is analyzed without losing the reliability of the measurements in low-frequency domain. To accomplish the research objective, it was analyzed the problems on the way of signal processing in low-frequency domain, and compared the response characteristics of FFT with those of MEM (Maximum Entropy Method) about the low-frequency of vibration. This evaluation of the response characteristics is used in determining appropriate signal processing algorithm into the low-frequency domain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.8
• /
• pp.583-590
• /
• 2003

For the preestimate of the vibration level of the ground next to a dwelling, a multivariate statistical analysis on the experiment data acquired from a variety of construction sites was performed, and then a new estimate model for the value of K and n that can be applied in the diagnosis of the damage was offered. The results maybe summarized as follows : First, the $K_{95}$ and n showed high correlation at P$\leq$0.05. Specially the correlation coefficient about $W_{max}$, S were higher in $K_{95}$ than in n. indicating that $K_{95}$ is generally associated with source conditions. Second, the factor analysis permitted to identify two major sources in each fraction. These sources accounted for at least 73 % of valiance of $K_{95}$. Third, the multiple regression model for the estimate of $K_{95}$ was developed from Fac1 which depend upon the source conditions and Fac2 which depend upon the transmission conditions. The n value is able to determine from the correlation relationship associated with $K_{95}$./.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.127-132
• /
• 1991

충격에 민감한 용기나 기계들은 운반이나 보관중에 받을 수 있는 진동충격 을 완화시키기 위해 충격 마운트를 이용하게 되며, 충격마운트는 용기나 기 계들이 허용하는 최대가속도와 이들이 취급되는 환경에 의해 적절히 선정되 어야 한다. 그러므로 내충격 설계는 최대 허용 가속도나 취급환경에 대한 사 양과 이 사양에 의한 충격 마운트의 선정, 그리고 선정된 내충격 시스템의 충격시험에 의한 오일 탬퍼의 결합용이 사용되기도 하지만 구조가 복잡하고 가격이 비싸서 대용량이 경우에만 국한되어 사용되고 있으며, 가장 경제적인 것은 방진고무를 사용한 것이다. 내충격 시스템은 일반적으로 큰 변형량을 요구하고 있으며, 방진고무의 경우 큰 변형에서는 hardening 스프링의 비선 형성을 가지고, 형상계수와 고무배합율에 따라 정적 스프링상수와 동적 스프 링상수가 큰 차이를 보이는 등, 설계상의 여러 제한이 있다. 그러나 방진고 무는 형상변화가 자유로우며 제작이 용이하기 때문에 이러한 장점을 이용하 면 저렴하고 다양한 용도의 충격마운트 제작에 효과적으로 사용될 수 있다. 본 논문에서는 원통형 콘테이너의 내충격 설계를 위해 충격사양에 의한 충 격마운트의 설계, 설계된 내충격 시스템의 충격시험에 의한 검증을 순차적으 로 실시하여, 방진고무를 이용한 충격마운트 설계기술을 제시함으로써, 이후 방진고무제품의 설계를 위한 자료 및 과정의 제정에 도움을 주고자 한다.